This is RodBuilding Episode #8 Rod handle Extension

In this episode of “This is RodBuilding,” Gary has a customer that needs a longer butt. He takes up the challenge of extending the length of the rod and shows you how to keep that split grip look and logo for the finish. There are some great tips in this for rod repair, as well as some ideas on how to make it work for you!
Make sure you subscribe and ring the bell, so you don’t miss any future episodes.
www.Americantackle.us
Facebook: / americantackle
Instagram: / americantackle
Twitter: / americantackle
TikTok: / americantackleco
American Tackle Rod Building Group: / atcrodbuilding
If you have any questions, please reach out to us:
Phone: [phone]
Email: [e-mail]

[@BeardedWeirdoFishing]

Great tips as always Gary... love this series!

[@fishyz1500]

Im about to turn my ugly stik gx2 into the perfect walleye run rod..this helps alot thank you! 👍

[@famfishingtvmoisfishing9843]

Great video Gary! I’m going to use these tips on the next job that requires a butt extension. I knew I was keeping some broken blanks for a good reason.

[@truecustomrods6937]

Many thanks mate! 😊

[@dorflonnigan4413]

Great information

[@bobrhine9057]

Great stuff as usual...give a video tour of your shop. It looks more like a studio...very impressive.

[@34136TS]

I'd like to see the fitting of an extendable/removable extra hand grip, like the original Daiwa Tournament 13'2" rods... 🤞 Cheers Gary

[@MainlakeFishguides]

Great stuff! Thank you for sharing. Glad to find your channel.

[@AmericanTackle]

Thanks for watching! Please subscribe!

[@truecustomrods6937]

Many thanks glad you found us too! 😊

[@EvolveCustomRods]

Great video!

[@AmericanTackle]

Glad you enjoyed it

[@wirinharwirjawan6422]

awesome and thanks for sharing.

[@pesc.a.vventura]

I'm adict with this series.....

[@denniskiblerbassguy]

Thanks for sharing

[@jessicaandtrains7768]

Nice job!
Ive got two rods that i probably want to extend by around 15cm. I dont have and old rod blanks though.
Hope i dont make a mess trying.

[@davidcrump2348]

I have a falconrod I purchased and the first time I used it one of the eyes came off. I could slide it back in but it continues to slide back out. I tried hot melt glue for the tip tops but it won’t hold. Should I attempt to scrap the factory epoxy off cut the threads and retry or should I get the hot melt glue off put it back on and try to get some epoxy in behind the factory epoxy?

[@BoundlessRoamad]

Since it's very difficult to get one piece 9 ft., 9.5 ft, and 10 ft. Rods shipped - please make a video on the easiest process to add 6 to 12 inches onto the back of a 9 footer. Thanks!

[@ycsmtube]

Sir, can you made to slide ?

[@desmondjohnson6360]

How to extend a micro rod handle?

[@chris.catignani]

Good show...Who makes that butt cap?