Piping | Pipe classification | Pipe schedule
ฝัง
- เผยแพร่เมื่อ 9 มี.ค. 2017
- This video explain about Pipe and its classification
Watch: Piping | Draw Isometric Drawing from Orthographic Drawing | PART-1
• Video
Watch: Piping | Elbow Rolling Degree Calculation
• Video
This channel explain about To Draw & Reading piping isometric Drawing, Piping design calculation, Piping take-off calculation,NDT methods,welding,cutting, Pipe fit-up, Pipe fabrication,erection,Elbow cutting, Elbow centre calculation, welding process,p&id details and symbols,valves,pressure gauge, hydro testing details, welding calculation, Pipe supports,Equipment,Pumps,Trigonometric formula application in piping, pipe offset calculation, pipe fitter manual, pipe fittings layout and development(template) and Piping interview Question and Answer for Piping Engineer,QA/QC and Pipe fitters.
Watch and Subscribe: / technicalpiping
Like: / pipingtechniques
Sir, video super.Nalla purinjirchi
Anna you are best... subscribed. Thank you for information....👍👍👍👌
Thank You It’s Simple and Good explanation.
Very nice, so easy to understand, thanx
I just found your channel. Good videos
Very helpful video sir, we want more videos like this,
Nice video. Simple and informative. Good👍
Good and valuable information about pipes
Informative video... Thank u
Thanks for sharing these videos... Easy to understand... Please upload more videos
thanx for this awsome video
Terima kasih
Pak, atas ilmunya
Thanks for your great videos
Very simple & to the point
Thank you a lot, super video for beginners.
Hi sir, thanks for explaining
TQ for ur information
excellent
Excellent
It's so nice to learn
Sir
Please make a video for basic welding information for inspection plane.
Excellent and thanks
Good tutorial class
super sir
EXCELLENT EXPLANATION THANKS
You are welcome!
Thank you very very much 👍
Thanks....
Thank you sir. Very useful for us....
Thank you
good explanation
Good Job Brother.
very good information
Very Good & valuable
thanks.share to all.
that u so much for delivering this knowledge
thanks
Good explain I have been using or seen.
Useful information
explanation is easy to u
nderstand
👍
TQ
Gud
Thank you very much Bro
super
great
Thank u for this video
Nice
nice
Thank u bro..
Good class
Very good
Good explain
Thank you so much, I needed this.
Thanks for explanation
Thanks you 🙏
Supper
Kindly make pipe routing concept video
very good,if it's possible can you explain in the same way hydro test
Good video that contain valuable information and I believe addition works on the themes and outlines will defiantly make it better.
I will be glad to assist you on this matter and just let me know.
Thank you for your efforts
wow thank you !
Thanks..share to your friends also
very informative. need notes of the same. very difficult to write during listening.
Thank u sir,for clearing the basic concept.Please explain about nominal diameter.
Nominal Pipe size (NPS), it neither indicates OD nor ID up to 12 inch. For pipe size 14 inch and above, NPS is equal to the OD of pipe.
It is generally indicated as NPS or Nominal Bore (NB) or Diameter Nominal (DN).
1 inch = 25.4 mm. So, 1" NPS pipe is called as 25 NB pipe & the OD is 33.4 mm and for 10" NPS or 250 NB pipe, OD is 273 mm. So upto 10" NPS or 250 NB pipe, OD is not equal to NB of pipe.
But the above is not applicable for size greater than 12 inch pipe. From 12 inch above or 14 inch & above pipe size, pipe size is equal to OD of the pipe.
14" NPS or 350 NB pipe is equal to 14 x 25.4 = 355.6 mm.16" NPS or 400 NB pipe is equal to 16 x 25.4 = 406.4 mm.24" NPS or 600 NB pipe is equal to 24 x 25.4 = 609.6 mm.
Job well done sir, useful for teachers and students as well, a big TQ sir. (plz remove the BG Music)
NIce video, Can you also explain in your next videos about Piping Codes and standards, different piping equipments, Speciality items in piping. Please. Will appreciate a lot.
Thanks
Thank you so much ,, excellent video tutorial with plenty of information....kindly make the video about schedule such as sch40,sch50
I need some more clear information about the schedules and standards
I will appreciate it
Very good.....
Thanks
Plz make a video of paiping allution nd sllove
can you explain some about energy pipe
Hi. I'm a mechanical engineer graduate. I know softwares such as PDMS & Smart 3D. I've been working as a Smart 3D administrator for about 1 year in India (Chennai). I'm no longer interested in this area and thus wanted to switch over Engineering side which will give me thirst to find solutions. In this 1 yr, I came to know about Piping material specifications, valve materials, codes & standards & also some layouts.
Could you pls suggest me how to switch from this S3D administrator to Engineering side ? Be it Piping layout engineering or Piping material engineering. I just wanna get into any of the above mentioned roles. Please guide me. I'll be grateful to u forever .
Dear Technical Piping sir/team
Thanks for uploading video.Can u describe diffrence between single random pipe and double random pipe.
Single random pipe length is usually 18-25 feet plain end or 18-22 feet threaded and coupled pipes.Double random length pipes are made between 38-40 feet.
Thanks
Plz Make a video to calculate Minimum Required thickness/design thickness of pipe
Super machi,,,, just include some photos next time because I didn't understand the pipe ends part
Pls explain where these different pipes are used
Nice sir but sir aap Hindi me v video banaiye
thanks But no need for music at all
From which size seam pipe starting
Sir please tell me how to select size of pipe
thx can you load video about pipe colour standard for cs as ss ltm.
super
Bhai lt ka heaider marking daliye
Please explain 14inch abive
According to ASME B 36.1 For DN100 (Schedule=40) OD=114.3mm, Pipe thickness= 6.02mm ,then id =(114.3-6.02×2=102.2)
Then justifiy ur DN definition..
सर आप से निवेदन है कि प्लेट का पाईप बनाने का फार्मूला बताये प्लीज़ सर और मार्किंग करने का भी
दन्यवाद
Bevel end pipes are used for weilding, flat end pipes for grooved fittings.
Hi, do you do gigs for distillery drawings with all technical aspects for fabrication?
you probably dont give a shit but does someone know of a trick to get back into an instagram account..?
I was stupid lost my login password. I would love any tricks you can offer me
@Ronnie Terry instablaster :)
@Phoenix Trent thanks for your reply. I found the site on google and im in the hacking process atm.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Phoenix Trent It did the trick and I actually got access to my account again. I'm so happy!
Thank you so much, you saved my account !
@Ronnie Terry glad I could help :D
Please remove music, otherwise excellent
I need a software to drewing piping isométrique ?
1 tip : invest in a good microphone
I want say Nominal Bore (NB)
For accurate measurement and drawings just refer IPC 99 Mobile App from google play store
English pandit
Explain me about DN and NPS
I don't need observations i need why their calling for?
Hi pandit,
Nominal Diameter is also known as the mean or average outside diameter and is represented by DN. It is neither equal to the inner diameter (ID) nor the outer diameter (OD) of the pipe. Nominal is a word that denotes non-specificity and in this case, identifies the approximate inner diameter with a non-dimensional number.
The terms nominal bore (NB) and DN are used interchangeably with NPS. DN is the European equivalent of NPS but shows pipe sizes differently than NPS. A 2-inch pipe may simply be referred to as DN 50 and to convert NPS to DN it has to be multiplied by 25.
Based on the NPS and pipe schedule, the OD and pipe thickness can be obtained from standard reference tables. For a specified NPS, the OD remains constant and the wall thickness increases with the schedule. Similarly, for a given schedule, the OD will increase with NPS while thickness stays constant or increases.
Hi have you been offered any freelance work out of these videos
I didn't understand the part I was looking for (pipe schedule). The accent is too strong.
Could someone explain me what is pipe schedule?
Thanks in advance.
Which institute in best for piping design course and job assistance is very important sir so pls give me information sir
Sir xxs xs ka meaning smj nhi aaya
XXS-Double extra-strong
XS-Extra-strong
Lagwej Hindi me chahiye
Hindi me jsnkari dijiye
Good charts; just can’t fully understand what he’s really saying.
Are bhai.... Aavaj thik nhi aata... Dikhta bhi nhi kuch... Kya kr rahe ho
Hardhet engineer copy
is it? ohh gud..
refer: process piping book.
Sir your voice is not clear and also your writing.
Ohh..sry of inconvenience.
Excellent