This is a review / what's in my tool belt video of the klein tools electricians tool belt from home Depot that I have used as a sheet metal apprentice.
Adsorb everything, it will eventually come around to make sense. Also keep watching videos like you are every bit of random knowledge will come into play doing hvac. "jack of all trades master of none, but often better then a master of one"
it can go anywhere, depends on who is interviewing you, you need to show not knowledge but the want to gain knowledge and wisdom, you can train skills you can not easily train want and will/attitude. When i Interview I want the guy who wants to learn over money but has bills to pay because i know hes gonna try his best to kick ass and take names, that guy makes more money then people floating. also confidence if you only know how to half ass braze you better own that half ass braze and get good. convince me you want it and if you do not know it, will know it.
Kintroy Johnson my reasoning is i want to learn a trade that is utilized world wide, that will last forever.im also trying to provide for my wife who is disabled.at my current job, im on my feet running around 98% of the day.i do martial arts, so im used to it
Tinners rule 😎👍 I'm a 1st year, on the road to journeyman bro. The tools I use most are tin hammer, tape( milwaukee or stanley fatmax),long flat head screw driver, level, bull snip, right snip, off set,( Midwest brand), ratchet wrenches, linenmans, y pliers, impact, drill. My bag will grow throughout the next 4 years. Also, words of wisdom to pre apprentices and 1st years, sharpies and pencils are a must! scribe your name on your tools! Work safe and smart, pick up different tricks and techniques from the people you work with.
19 and just started at a shop here in Canada. Love the work so far but only a few weeks in, anything I should know about this trade before I go to school?
@@403nedya9 That's awesome bro. I started in the shop also as a pre apprentice. It's actually good to start off in the shop to get acclimated with sheet metal ( Duct work)...How to pound it together, how to use a burn table, how to make s-slips/ drives, how to use the presses and sheers...I would say, in the shop, show your willingness to learn! Ask questions and if you don't understand something don't act as if you just so you don't feel dumb lol because you will regret it later when asked to do it. Get an understanding. Also, when it's slow in the shop or you don't have much to do, pick that broom up and sweep without being told, empty the trash bins...Also, which is probably number 1, ALWAYS be on time. If you start at 6am and you walk in the door at 6am your not on time. Be to work at least 5/10 min early, it goes a long way and will build your reputation...You may like the shop and want to stay in the shop but if you get out in the field the same principles apply. Be on time, ask questions and get an understanding, take notes if need be, be diligent, be a hard worker and respect your fellow workers, don't talk behind people's back, stay focused. ALWAYS, I REPEAT, ALWAYS HAVE YOUR TAPE MEASURE ON YOU lol seriously, and a sharpie or 2... Hope this helps! Keep up the good work.
@@sealedsecure3754 just saw this now, it’s going great man. I’ve been following this exact comment just from talking with co workers. Seeing the completed work after a few days of hard labour is a great feeling, glad I found my career this early on
Always modify your tools to make YOUR tools more useful for YOU, and share those cool mods Also, carrying all these tools at all times is significantly faster than running to the truck. But if you want to be a little lighter it doesnt hurt to have a "gang box" like a bucket or crate in a centralized location where you can get to all your stuff without carrying it full time.
If I saw you walk onto my job with all those tools on , my first question would be where are your industrial strength suspenders ?? That's a ridiculous amount of tools to carry all the time.
Mr Latnemis no not union I had started as a residential technician helper I learned a lot from my former boss and got into sheet metal, the company I was working for was going to fold so I found an opportunity at Arctic Glacier.
Jose Santos oh okay! I thought u were in the Union. I just recently got in the sheet metal Union. We mostly do sheet metal work and I want to jump ship to get into the refrigerant/service side. Thanks bud I wish I was in your shoes!
Mr Latnemis I tried getting in my local union but didn't work out good job with that! Union supplies with power tools at least here in California they do. From my understanding once you're done with the apprenticeship you can study to become a tech
Depending on the phase of the project sheet metal is mainly labor intensive. Electricians become labor intensive when putting up big EMT and pulling 6 to 8 gauge wires.
WOW bro you got a lot of tools for a sheet metal worker I've been an installer for 13 years and i don't carry nearly that much how do your shoulders feel at the end of the day anyway still a good video for apprentices
That's what I was aiming for. I worded the title wrong and just suggest what to have and not carry. At one point I had all that then I got a small bag and what I don't use at the time goes in there.
Didnt quite change professions I changed what aspect of HVAC/R I work in. The job I was working at was finishing a project and started laying people off, so instead of waiting for my turn to get let go. I found another job in refrigeration.
Armando Higuera HVAC is sheet metal difference is which sheet metal are you working for structural or hvac. I jumped because the company i was working for was laying people off so to beat them to the punch I got a service job... but I'm back in sheet metal and posted a new video of how I keep it now with some tools i forgot in this video
Jose Santos Thank you for replying. I’m currently trying to join the apprenticeship program for local 105. I’m not yet working but trying to land a job soon.
Armando Higuera great job on passing usually it depends on your score when they'll interview you... going union is a great choice for laying the ground work for the future. Try looking into local non union shops just to get a feel for it usually situations might end up better
Evan Archer I didnt switch to HVAC I was already in HVAC sheet metal I just switched to HVAC service but I made the switch back to sheet metal and have an updated video of my tools thank you for viewing
Spend some money and buy some occidental bags you won’t ever have to buy any more again. Only carry what you need for the task all those tools will kill you going up and down the ladder over the years. Tinknockers Local 105🇺🇸
@@dennisjackson9254 I set up my own rig I bought my bags seperate. After twenty years I finally came up with a set up that word for me. I bought two of the same deep pocket bags my drill fits in one with some tools deep pockets for hardware and a Klein Bolt bag in the back for my hammer or drill kleats tubes of pookie . You always want to make every step count and have what my ya need for the task.
one thing I did forget to mention is get a panduit gun it helps with zip tying your flex duct to your round duct.
Jose Santos i start in july.
Any advice??
Adsorb everything, it will eventually come around to make sense. Also keep watching videos like you are every bit of random knowledge will come into play doing hvac. "jack of all trades master of none, but often better then a master of one"
Kintroy Johnson when you go to the panel interview, what questions do they ask? Is it the usual questions?
it can go anywhere, depends on who is interviewing you, you need to show not knowledge but the want to gain knowledge and wisdom, you can train skills you can not easily train want and will/attitude. When i Interview I want the guy who wants to learn over money but has bills to pay because i know hes gonna try his best to kick ass and take names, that guy makes more money then people floating. also confidence if you only know how to half ass braze you better own that half ass braze and get good. convince me you want it and if you do not know it, will know it.
Kintroy Johnson my reasoning is i want to learn a trade that is utilized world wide, that will last forever.im also trying to provide for my wife who is disabled.at my current job, im on my feet running around 98% of the day.i do martial arts, so im used to it
Tinners rule 😎👍
I'm a 1st year, on the road to journeyman bro. The tools I use most are tin hammer, tape( milwaukee or stanley fatmax),long flat head screw driver, level, bull snip, right snip, off set,( Midwest brand), ratchet wrenches, linenmans, y pliers, impact, drill. My bag will grow throughout the next 4 years. Also, words of wisdom to pre apprentices and 1st years, sharpies and pencils are a must! scribe your name on your tools!
Work safe and smart, pick up different tricks and techniques from the people you work with.
Can’t beat Midwest tools.
@@SusiesRepeat
It's crazy that I left this comment 3 years ago lol. I'm a 5th year now still going strong. 💪💪💪
19 and just started at a shop here in Canada. Love the work so far but only a few weeks in, anything I should know about this trade before I go to school?
@@403nedya9
That's awesome bro. I started in the shop also as a pre apprentice. It's actually good to start off in the shop to get acclimated with sheet metal ( Duct work)...How to pound it together, how to use a burn table, how to make s-slips/ drives, how to use the presses and sheers...I would say, in the shop, show your willingness to learn! Ask questions and if you don't understand something don't act as if you just so you don't feel dumb lol because you will regret it later when asked to do it. Get an understanding. Also, when it's slow in the shop or you don't have much to do, pick that broom up and sweep without being told, empty the trash bins...Also, which is probably number 1, ALWAYS be on time. If you start at 6am and you walk in the door at 6am your not on time. Be to work at least 5/10 min early, it goes a long way and will build your reputation...You may like the shop and want to stay in the shop but if you get out in the field the same principles apply. Be on time, ask questions and get an understanding, take notes if need be, be diligent, be a hard worker and respect your fellow workers, don't talk behind people's back, stay focused. ALWAYS, I REPEAT, ALWAYS HAVE YOUR TAPE MEASURE ON YOU lol seriously, and a sharpie or 2... Hope this helps! Keep up the good work.
@@sealedsecure3754 just saw this now, it’s going great man. I’ve been following this exact comment just from talking with co workers. Seeing the completed work after a few days of hard labour is a great feeling, glad I found my career this early on
cool vid. thanks for making it. gives me an idea of what I'll need as an installer!
rippin.lipz I'm glad I can help have any questions feel free to ask!
Great job, I have as many tools but we dont carry all at once it depends on what task we doing
Always modify your tools to make YOUR tools more useful for YOU, and share those cool mods
Also, carrying all these tools at all times is significantly faster than running to the truck. But if you want to be a little lighter it doesnt hurt to have a "gang box" like a bucket or crate in a centralized location where you can get to all your stuff without carrying it full time.
If I saw you walk onto my job with all those tools on , my first question would be where are your industrial strength suspenders ?? That's a ridiculous amount of tools to carry all the time.
Dont carry them all the time just a general on what I would depending on the situation
that's great now go get your pookie brush
an old adage here.. "do your best, pookie the rest" ;)
New to sheet metal here. May I ask why you moved to AC tech?
Just something I was used to I'm back to doing both HVAC sheet metal/install and service/controls
Appreciate the reply thank you
How did u jump ship from Sheet Metal to Refrigeration. We're you were you in the Union? If so what union?
Mr Latnemis no not union I had started as a residential technician helper I learned a lot from my former boss and got into sheet metal, the company I was working for was going to fold so I found an opportunity at Arctic Glacier.
Jose Santos oh okay! I thought u were in the Union. I just recently got in the sheet metal Union. We mostly do sheet metal work and I want to jump ship to get into the refrigerant/service side. Thanks bud I wish I was in your shoes!
Mr Latnemis I tried getting in my local union but didn't work out good job with that! Union supplies with power tools at least here in California they do. From my understanding once you're done with the apprenticeship you can study to become a tech
@@mrlatnemis1849 137?
Fucking scab
Those Malco leather wrapped hammers are $70 nowadays
Estwing makes a decent sheet metal hammer for less than $40 I believe it was.
Which would you say is more labor intensive, electrician or sheet metal worker
Depending on the phase of the project sheet metal is mainly labor intensive. Electricians become labor intensive when putting up big EMT and pulling 6 to 8 gauge wires.
Thanks for the reply
SHEET METAL
Sheet metal
Jose, you need a tripod to mount your camera on; your video is way too shaky.
WOW bro you got a lot of tools for a sheet metal worker I've been an installer for 13 years and i don't carry nearly that much how do your shoulders feel at the end of the day anyway still a good video for apprentices
That's what I was aiming for. I worded the title wrong and just suggest what to have and not carry. At one point I had all that then I got a small bag and what I don't use at the time goes in there.
4:56 What is that right before the scratch awl? I couldn't make out what was said...
@blacklight its called a inkzall, milwaukees permanent marker
Nice Klein bags
LOW VOLTAGE DUDE thank you
The hammer is leather wrapped bro not wood
thegurule1 felt like wood when I first got it and should have corrected myself for the video thanks for the info bro!
Why did you change professions?
Didnt quite change professions I changed what aspect of HVAC/R I work in. The job I was working at was finishing a project and started laying people off, so instead of waiting for my turn to get let go. I found another job in refrigeration.
you are the fing man. thanks
JD!?! no sir you are... you're welcome any questions just ask
Why did you jump ship? Do you recommend HVAC over sheet metal?
Armando Higuera HVAC is sheet metal difference is which sheet metal are you working for structural or hvac. I jumped because the company i was working for was laying people off so to beat them to the punch I got a service job... but I'm back in sheet metal and posted a new video of how I keep it now with some tools i forgot in this video
Jose Santos Thank you for replying. I’m currently trying to join the apprenticeship program for local 105. I’m not yet working but trying to land a job soon.
Armando Higuera awesome!! Where are you from? I currently work non union but the 105 is awesome
Jose Santos I’m from El Monte. Yeah, this is all new to me but I’m trying to do something with myself. I️ passed the test but haven’t been called.
Armando Higuera great job on passing usually it depends on your score when they'll interview you... going union is a great choice for laying the ground work for the future. Try looking into local non union shops just to get a feel for it usually situations might end up better
Get some Fairmont tongs bro they will last forever
Why did you decide to switch to HVAC?
Evan Archer I didnt switch to HVAC I was already in HVAC sheet metal I just switched to HVAC service but I made the switch back to sheet metal and have an updated video of my tools thank you for viewing
How can you work with all that hanging of you
What made you give up sheet metal work
st.louis missouri didn't give up just wanted to expand my knowledge of HVAC got back in it a little while ago as a lead and made an updated video
Man you don't need to wear all your tools.
Hammer, snips and a screwdriver and vice grips
what brand is that scratch awl?
rtz549 not too sure theres no branding on it my manager gave it to me
You can make one out of a old phillips screwdriver...grind it sharp good to go...
What's with those little C clamps? What are you hanging T- bar? 😂
Well if you actually put some tdc together you'd know they help
bar fold
Dont need all this stuff in your belt yall just take out what your gonna use daily.
Why would you want carry all that around all day
Dam u carry all that around all the time?? You dont need to carry everything all aye time just keep them with you in a side bag
Not all the time but some situations good to carry most the stuff I do. I wanted to give a brief of some stuff I would carry
Spend some money and buy some occidental bags you won’t ever have to buy any more again. Only carry what you need for the task all those tools will kill you going up and down the ladder over the years. Tinknockers Local 105🇺🇸
thanks for the heads up this is meant for apprentices. Have oxys now 105 bro 🤙🏽🤙🏽
What occidental bags do you recommend for a tinknocker?
@@dennisjackson9254 I set up my own rig I bought my bags seperate. After twenty years I finally came up with a set up that word for me. I bought two of the same deep pocket bags my drill fits in one with some tools deep pockets for hardware and a Klein Bolt bag in the back for my hammer or drill kleats tubes of pookie . You always want to make every step count and have what my ya need for the task.
Jesus loves you God bless
Please get rid of those PITTSBURG vise grip . You should be ashamed .
The Tin Man ashamed? it's a tool that gets the job done thanks for the feed back though