It actually has a light sensor built into it. That's what the little dot at the bottom of the screen is. it will auto dim the screen and turn your headlight on (if you have one tied to the controller) automatically. Really nice feature!
Very helpful walkthrough of the 850c. I think only topic left uncovered is purpose / meaning of the yellow band that gooes around the bottom of the circular display. Much appreciated!
Thanks: Great video.Got my Trek build going today Bafang BBS02 doesn't have instructions for the 850 c. I put a 52v 1500 w battery on it.It almost pops a wheelie.
Just bought a bafang 48v 750w with this display, Hence why im looking at this vid, lol, Feels like a little kid waiting for xmas now i bought it, I got a really nice carerra hellcat lmt edition 29 inch, Green an black colours are amazing, Looking forward to different travelling, I got a 1600w monster scooter see, So be kool to see what difference is on hills ect, As the 750w is 1500w at peak, Isnt it, lol.... Cant wait to actually get the bafang motor now, lol....
I guess Im asking randomly but does anyone know a way to log back into an instagram account?? I stupidly forgot the password. I appreciate any assistance you can offer me!
Excellent video. but I'm confused about the differences between 850C, P850C and 860C. Can you point me to some place that compares these products. I wish you had a video on each.
this was a big help in setting up my screen, thanks! BUT the time will not stay set . When I turn off the battery it seems to go back to factory settings. So when I next use the bike the time is wrong again. What am I doing wrong? Thanks
There was a question if you Can change The speed limit and your Answer was if we had seen The video. Does that mean if you buy this and replace it, it Will work out of The Box? I just bought a Leader fox Lucas With bafang m420 today, and The display looks exactly like this, but under advanced i Can only change 2 options - not The speed limit?
Helpful video but I do have one question. I just purchase a 850c colour display for my Voltbike Yukon. Everything is perfect except for the odometer. The odometer reads 497,715 total km and I can’t figure out how to zero it out so I can start with a zero Km. Any help would be appreciated.
I would like to know what the differences are, if any, between the 850C, 860C and C18. They all seem to have the same settings. The Bafang web site only shows the C18. Does this mean the 850C and 860C and discontinued?
setting a password on start up only seems to effect the display, the bike still works when no password has been inputted , to me this kinda makes having a password set useless, someone can still jump on your bike switch it on and ride away at full power
Good video. Do you know if you can extend the cable for the push button control. I have a beach cruiser with a BBSHD and ape hanger bars, and the original monochrome display had a hard wired cable from the display to the control pad. It was too short to reach to the grip so I put one of those smaller displays that mount near the grip with the button integrated. I want that 850c display but obviously want the assist buttons near the grip.
*Hello! Please tell me which display models will fit my BAFANG 500W motor? 850 C with UART protocol does not suit me! We really need your help! Thank you!*
It relates to whatever wheel you have the sensor installed on. By default that is the rear wheel but I guess it could be fitted to the front with some imagination.
I recently got the DPC 14 for the features it showed. Especially the range indicator. Unfortunately it doesn’t seem to be calculating properly as it keeps rising until the high 400 and then it stops and resets itself to 1klm and stays there. The only way to start it again is to turn off the display and back on but it keeps doing the same. Any input on this situation would be greatly appreciated.
I am running a 52volt battery on my bafang 750w. Is this display capable of running a 52v battery. Does it have the ability to change it in the settings?? Any info would be of much help. It is very unclear trying to get a straight answer, alot of conflicting info.
I just cannot get the MPH to work? sensor seems to blink showing operation & correct depth, but i get 1 to 5mph or 3 to 9kmh?, just don't know what to do next?, power clock voltage all working.
Is there a controller that allows you to set the motors output power in watts? I would like to get a 1000w motor and still keep the class 1 or 2 designation by limiting both continuous output power (500w) and by speed sensor to 32 km/h then when off-road I could set it back to no restrictions?
2 years ago i bought a Bafang middlemotor with this 850C Display. The Discription said its a 48V System. Later i recognized that i could change the settings to a diffrent voltage. When my 48V Battery was done i bought a 36V battery and changed the settings to 36V. But the System still thinks there is a 48V battery. And because the 36V battery has fully loaded only 38V the Display/System thinks the battery is low in voltage and doesn't allows to start the motor. I tryed the reset to factory settings and changed again to 36V. Even so the system accepts this change by showing 36V in the main menu it still thinks there should be a 48V Battery and shuts of the motor. What can i do? Bafang support service is not anwsering my mails.
You need to set your low voltage shut off ( Low battery protection[V] ) to a lower value than your battery. If it's a 36 battery your shut off voltage should be around 29v give or take. Hopefully you have a BMS installed on your new battery to limit the discharge. For a 48v battery the low voltage shut off is set to 41v by factory settings and will cut off power to the motor.
when I brake at higher speeds the display shows me a red exclamation mark and when I want to start again it no longer accepts gas. The display shows km but the bike is standing, as if holding the brake and the red exclamation mark is still on the display.
hello this display with controller, can it support 14s battery? because I installed a 13s battery and when it is charged to full 54.6v on the screen it indicates that it is at 93% please help me
@@goldenmotorNA Thanks for the answer, my Euronau ebike kit has a 1000w 48v hub motor on the wheel and a 1000w 48v controller, and as I was telling you, it shows that it has 93% charge with the battery that has 13s on, then I would be sure I can put a 14s battery?
Ah okay, I was bench testing so the speed sensor wasn't seeing any counts at the wheel. Got my bike up and running last night but it too fast for the headlight. I overrun the headlight around 25-30 mph. Now I need to find a way to keep the chain on when on a gravel road with bumps.
Yeah, the chain hops off the front sprocket when I stop pedaling. I just took it for a 10 mile ride and I could watch it hop off everytime that I quit pedaling while in pedal assist mode. I read today on the forums about the Lekkie and the Luna eclipse sprockets are the solution for the bafang sprocket.
Does the 850c allow you to set a power level limit - like suppose you want to use a 48V battery with a 250 Watt motor and keep the power under 250W so the motor will not overheat. ?
You need to buy the controller programming cable and use a laptop to change the power of each pas lvl. The cables are around $10 on Amazon. You unplug the screen disconnect your battery then plug the cable in where the screen plugs in.
It actually has a light sensor built into it. That's what the little dot at the bottom of the screen is. it will auto dim the screen and turn your headlight on (if you have one tied to the controller) automatically. Really nice feature!
J'aimerais en français merci
En french
Extremely helpful feature!
This is by far the best video on this unit... well done
Just ordered my kit with this dispay. Thanks for reviewing it.
This video saved me a lot of time and aggravation. Thank you very much!!
Aaron
Thanks! I got one today, fitted on 20" folding bike. It's going like crazy! Just needed to know how to set up right parameters on it!
DITTO! Old recumbent with 20" tires. System works a lot better now.
Very helpful walkthrough of the 850c. I think only topic left uncovered is purpose / meaning of the yellow band that gooes around the bottom of the circular display. Much appreciated!
It is great people like you help out lazy people like me.
Thanks a lot. Very helpful. Couldn't do it without you
Very helpful description it heped me to change the miles to kilometers, thank you
Thanks: Great video.Got my Trek build going today Bafang BBS02 doesn't have instructions for the 850 c. I put a 52v 1500 w battery on it.It almost pops a wheelie.
Am trying to do a build this winter. Good to see someone else using parts i'm thinking of
Just bought a bafang 48v 750w with this display, Hence why im looking at this vid, lol, Feels like a little kid waiting for xmas now i bought it, I got a really nice carerra hellcat lmt edition 29 inch, Green an black colours are amazing, Looking forward to different travelling, I got a 1600w monster scooter see, So be kool to see what difference is on hills ect, As the 750w is 1500w at peak, Isnt it, lol....
Cant wait to actually get the bafang motor now, lol....
A lovely smooth tutorial on this display👌
Brilliant 👏👏👏👏👏👏
I guess Im asking randomly but does anyone know a way to log back into an instagram account??
I stupidly forgot the password. I appreciate any assistance you can offer me!
Great video, much easier than reading the manual.
great information, loud and clear, just got me an X1 with this display
Incredibly helpful video! Very easy to follow. Thanks!
nice vids mate - which display do u think is the best to get? the DPC18 or 850c or 860c or 500c ??
Just got this system today very helpful video thanks again
Great video - simple and comprehensive. Thanks for posting and sharing..
Brilliantly explained 👍👍👍
Thank you. I'm getting the DPC-18. Hope its the same.
Excellent video. but I'm confused about the differences between 850C, P850C and 860C. Can you point me to some place that compares these products. I wish you had a video on each.
The clock is the time saved after removing battery or do you have to reset the time again?
this was a big help in setting up my screen, thanks! BUT the time will not stay set . When I turn off the battery it seems to go back to factory settings. So when I next use the bike the time is wrong again. What am I doing wrong? Thanks
Excellent job. Thank you!
Awesome vide, thanks for the info..
There was a question if you Can change The speed limit and your Answer was if we had seen The video. Does that mean if you buy this and replace it, it Will work out of The Box? I just bought a Leader fox Lucas With bafang m420 today, and The display looks exactly like this, but under advanced i Can only change 2 options - not The speed limit?
Hi great video but can't see the difference between this 850c and the c18 display?
Changing the speed, is that as in its set for uk speed restrictions by increasing it the bike can go faster?
can I use a 36v battery on a 750 watts BBS02 48v?
Thanks, very helpful!😊
Why are there like 8 displays to choose.from.bafang? Super.confusing.... which one or 2 are the best?
Helpful video but I do have one question. I just purchase a 850c colour display for my Voltbike Yukon. Everything is perfect except for the odometer. The odometer reads 497,715 total km and I can’t figure out how to zero it out so I can start with a zero Km.
Any help would be appreciated.
Hold plus and minus
I would like to know what the differences are, if any, between the 850C, 860C and C18. They all seem to have the same settings.
The Bafang web site only shows the C18. Does this mean the 850C and 860C and discontinued?
C18 is an official bafang display the others are 3rd party displays
@@goldenmotorNA Thanks.
setting a password on start up only seems to effect the display, the bike still works when no password has been inputted , to me this kinda makes having a password set useless, someone can still jump on your bike switch it on and ride away at full power
Thanks for the video man.
Good...now, mid-drive (52v @ 50amps) or rear MP5 @ 52v. Or even setup a 2wd w/GM hubs? ;-)
We just setup a dual drive hub Fat bike motor =)
th-cam.com/video/XkBcYlLLRBM/w-d-xo.html
Good video. Do you know if you can extend the cable for the push button control. I have a beach cruiser with a BBSHD and ape hanger bars, and the original monochrome display had a hard wired cable from the display to the control pad. It was too short to reach to the grip so I put one of those smaller displays that mount near the grip with the button integrated. I want that 850c display but obviously want the assist buttons near the grip.
why there is a different voltage setting? is the bafang bbs02b 48v 750w can pair with 36v 20ah battery?
*Hello! Please tell me which display models will fit my BAFANG 500W motor? 850 C with UART protocol does not suit me! We really need your help! Thank you!*
How many 3.5 - 4.0 inch displays are there for the Bafang models ?
Thanks! Now I know!
Does this display work with the
750 hubdrive bafang moters
When you put in the wheel size I assume it is the rear wheel? I have 20” front and 26” rear tire size. Thanks for a very good video!
It relates to whatever wheel you have the sensor installed on. By default that is the rear wheel but I guess it could be fitted to the front with some imagination.
will this work on any ebike ? i got a ebike with befang 965 right now but wanna change to get accses to more info and settings
Is this can use to unlock speed in mate X 250w,?
Great video. On mine at the bottom of the screen I seen lit up 21 hrs what does this mean thanks .never seen it before
That's an error code for the speedometer sensor not being detected.
Hi, how do i change the percentage from increments of 20% with my 850c display
I recently got the DPC 14 for the features it showed.
Especially the range indicator.
Unfortunately it doesn’t seem to be calculating properly as it keeps rising until the high 400 and then it stops and resets itself to 1klm and stays there.
The only way to start it again is to turn off the display and back on but it keeps doing the same.
Any input on this situation would be greatly appreciated.
How can I change the voltage options so I can select 52v. I can only see 36 or 48v?
How do you disable the pedal assist? I want to go fully throttle.
I am running a 52volt battery on my bafang 750w. Is this display capable of running a 52v battery. Does it have the ability to change it in the settings?? Any info would be of much help. It is very unclear trying to get a straight answer, alot of conflicting info.
Does this unit enable you to alter speed limitations or does it come with restrictions on altering this attribute?
Did you watch the video?
Hope you can help me.When I turn on display the battery lite comes on and goes off only when I use throttle. BUT HAVE NO PEDDLE ASSIST.???????
I just cannot get the MPH to work? sensor seems to blink showing operation & correct depth, but i get 1 to 5mph or 3 to 9kmh?, just don't know what to do next?, power clock voltage all working.
Great. Video.....very informative
IS THERE A WAY TO CHANGE BACK GROUND COLOUR? MINE IS SET TO WHITE OR BLACK EVERYTHING ELSE IS IN COLOUR
Very helpful ta
Glad it helped
So this one can calculate how far can Drive on battery?
So cool
Is it waterproof? I just got one and I'm not sure!
i have a rear hub motor can i make it work with rear hub motor
how to update firmware this display for example "scenes" only analog mayby in new firmware another scenes is available
how do you change bafang 850c display clock from 24 to 12 hour?
Thank you 🙏
Does this display work on the voilamart kits?
why is the power uip passsword promp coming on ?
Hi mate ,my bike keep going to p with out my will and moves even when I put it a zero
I can install this display for my ebike 36v, 350w ?
Yes it will
Thank you so much. Well done..
Very helpful thanks.
What the different between 850c & c965?
very useful info thanks
Is this display unit fixed to the bike, or can you quickly dismount it, to take it with you when park, and lock up, in a public place? Thanks.
I think it’s fixed.
Is there a controller that allows you to set the motors output power in watts? I would like to get a 1000w motor and still keep the class 1 or 2 designation by limiting both continuous output power (500w) and by speed sensor to 32 km/h then when off-road I could set it back to no restrictions?
Yes, you can reduce the current limit (amps)
What's cap out ?
told me what i needed to know
Hi . My bafang 48v 500w . But display shows me error 08H . And motor no run. What does mean 08H . please help me.thanks
What is ube on assist settings
Hi I wonder if you can only turn of pedal assist but thumb gas still works?
Yes you can use throttle on pas set to o
I put the code and not let me to change advanced settings. Why?
Можно подружить его с китайскими контроллерами кунтенг?
I already have a DPC-18 but (after 10,000 km) it's heavily scratched and also 1 of my buttons are bent. So how does the 850c compare to the DPC-18?
Same shit different name kinda, but there is 2 buttons less on the 850c and thus easier to navigate though the menus and stuff. I bought the 850c.
2 years ago i bought a Bafang middlemotor with this 850C Display. The Discription said its a 48V System. Later i recognized that i could change the settings to a diffrent voltage. When my 48V Battery was done i bought a 36V battery and changed the settings to 36V. But the System still thinks there is a 48V battery. And because the 36V battery has fully loaded only 38V the Display/System thinks the battery is low in voltage and doesn't allows to start the motor. I tryed the reset to factory settings and changed again to 36V. Even so the system accepts this change by showing 36V in the main menu it still thinks there should be a 48V Battery and shuts of the motor. What can i do? Bafang support service is not anwsering my mails.
You need to set your low voltage shut off ( Low battery protection[V] ) to a lower value than your battery. If it's a 36 battery your shut off voltage should be around 29v give or take. Hopefully you have a BMS installed on your new battery to limit the discharge. For a 48v battery the low voltage shut off is set to 41v by factory settings and will cut off power to the motor.
I have a problem, my Bafang 750w 48v 17.5 Ah doesn't give me any range information? Anyone else with the same problem? Or maybe a fix?
Advance setting set limit 3 5 or 9 go for a ride, and than it will update battery info and show range thats I what I did it works good now
Come programmare L acceleratore??
More info on battery info cap'out etc
When I charge it, it doesn't show 100%, what is the reason?
when I brake at higher speeds the display shows me a red exclamation mark and when I want to start again it no longer accepts gas. The display shows km but the bike is standing, as if holding the brake and the red exclamation mark is still on the display.
Move you magnet closer
When does the range update?
Advance setting set limit 3 5 or 9 go for a ride, and than it will update battery info and show range thats I what I did it works good now
Hi can you help me about something please?
hello this display with controller, can it support 14s battery? because I installed a 13s battery and when it is charged to full 54.6v on the screen it indicates that it is at 93% please help me
Yes that just means you have a 52v firmware in there . If you have a bbshd refer to this video
th-cam.com/video/U4KdSIWpR48/w-d-xo.html
@@goldenmotorNA Thanks for the answer, my Euronau ebike kit has a 1000w 48v hub motor on the wheel and a 1000w 48v controller, and as I was telling you, it shows that it has 93% charge with the battery that has 13s on, then I would be sure I can put a 14s battery?
Can I use this display to any other ebike
This is only compatible with bafang motors
For a universal display please check out the CA3
goldenmotor.bike/product/cycle-analyst-v3-with-shunt/
Hello, can I install hydraulic brakes with this display?
Yes the brakes have nothing to do with display you need hydraulic brake sensors here is a link
goldenmotor.bike/product/bafang-hydraulic-brake-sensor/
Anyone know what pedal assist UBE stands for I have been trying to figure this out and he just skipped over it without saying?
UBE represents factory default setting, I guess 5? I have actually just tried UBE on my bike and have 6 power levels now?
Huumm ...WHAT is "UBE"...?
I had a 21A! show up on mine, what does that mean?
That is a speed sensor error. We are going to publish a video on that tomorrow
Ah okay, I was bench testing so the speed sensor wasn't seeing any counts at the wheel. Got my bike up and running last night but it too fast for the headlight. I overrun the headlight around 25-30 mph. Now I need to find a way to keep the chain on when on a gravel road with bumps.
for that you need a lekkie chainring they are currently on sale
goldenmotor.bike/product-category/parts-and-accessories/lekkie-bling-rings/
Yeah, the chain hops off the front sprocket when I stop pedaling. I just took it for a 10 mile ride and I could watch it hop off everytime that I quit pedaling while in pedal assist mode. I read today on the forums about the Lekkie and the Luna eclipse sprockets are the solution for the bafang sprocket.
Dude how did u get the battery % in the top right? Cheers
Oh I see now....nice video
You might have the 52v firmware on the controller paired with a 48v battery
hello bro mujhe ek issue ha plzz resolve do bro😢
Does the 850c allow you to set a power level limit - like suppose you want to use a 48V battery with a 250 Watt motor and keep the power under 250W so the motor will not overheat. ?
You need to buy the controller programming cable and use a laptop to change the power of each pas lvl. The cables are around $10 on Amazon. You unplug the screen disconnect your battery then plug the cable in where the screen plugs in.
@@justin169169m k
Its not as colorful as the 18 but does everything
hello it is possible dont reset the value of trip?
Click on - + bottoms at the same time