Hi Jason. Thanks for taking the time to do this video. Yet again I am learning stuff. Because you always mention other factors to think about not just the key cutting. Thanks again Jason for edumicating us.
So I have a locked cabinet that has the same type of key. It looks like a skelton key but has a hole at the end. The key broke while trying to unlock it and I need to find a replacement. I had a locksmith come in and he didn't't have the right size. If I can't find a key that fits, we will have to break the glass to gain access. Open to any suggestions. I have a picture of the lock as it was also on the lower part of the cabinet. Looks similar to the one you were showing. should I find another locksmith? Can I order these keys somewhere?
I know it’s not particularly relevant, but this seems like the place to seek information so here goes nothing. I acquired a roll top desk and replaced the key. It didn’t work, I thought the lock was jammed. I unscrewed it. It works fine when it’s out of the desk, but the key refuses to turn when the lock is installed- what could be the problem?
@@pouncerminned863 I see, so basically the whole mechanism needs enough Y-axis wiggle room to function. I noticed that compressing it against the desk or via the screws along the Y-axis prevents function. Thanks so much for your input, have a great day.
I need to stop watching and start doing. I bought the parts to convert one of my old cutters into a slotter about 6 months ago, but I have not done the conversation yet.
![[1591] The Replicant: Pocket Key Casting Perfected!](http://i.ytimg.com/vi/L5Fus7qbRZM/mqdefault.jpg)
![[1591] The Replicant: Pocket Key Casting Perfected!](/img/tr.png)
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
![[944] .50 BMG vs. Strongest Padlock in the World (Squire SS100CS)](/img/n.gif)
I always enjoy watching the videos of lever locks--and the "squaring of the key" to fit before anything else can get started.
Great video as always, thanks for making this Jason 😊🙏👏
Always a joy to watch the master in action!
Hi Jason.
Thanks for taking the time to do this video.
Yet again I am learning stuff. Because you always mention other factors to think about not just the key cutting.
Thanks again Jason for edumicating us.
love the sticker on the grinder!
Thanks, I appreciate your wealth of experience.
You have one of shows worth watching.
Somebody once told me the world was gonna owe me.... If you get this, congrats for paying attention, lol.
So good to see a Master at Work... I can set and watch one work all day #LOCKFORCE
another great video!
Thanks again!
Great video, gotta do things in order, or you just start over...
Have a great day
good job
Not a particularly difficult one ,but for a septic who doesn't deal with lever locks on a regular basis it was a good job
I know safeties third but what's first and second?
So I have a locked cabinet that has the same type of key. It looks like a skelton key but has a hole at the end. The key broke while trying to unlock it and I need to find a replacement.
I had a locksmith come in and he didn't't have the right size. If I can't find a key that fits, we will have to break the glass to gain access. Open to any suggestions. I have a picture of the lock as it was also on the lower part of the cabinet. Looks similar to the one you were showing. should I find another locksmith? Can I order these keys somewhere?
I know it’s not particularly relevant, but this seems like the place to seek information so here goes nothing. I acquired a roll top desk and replaced the key. It didn’t work, I thought the lock was jammed. I unscrewed it. It works fine when it’s out of the desk, but the key refuses to turn when the lock is installed- what could be the problem?
try not to over tighten the screws holding in the lock
@@pouncerminned863 that seems to have been the issue, thanks a bunch. I don’t understand mechanically why it needs less tension like that.
@@BrightDecision i think due to tolerances? i am not sure myself exactly
@@pouncerminned863 I see, so basically the whole mechanism needs enough Y-axis wiggle room to function. I noticed that compressing it against the desk or via the screws along the Y-axis prevents function.
Thanks so much for your input, have a great day.
How much for a lock key ? My lock looks pretty much the same.
I need to stop watching and start doing. I bought the parts to convert one of my old cutters into a slotter about 6 months ago, but I have not done the conversation yet.