We're 10 year and 3 washing machines in now but thanks for all your views and comments. Transit bolts are not obvious (and weren't in the instructions for this one) if you've never installed a washing machine before 🤣
this is why you should always read the installation instructions before use. if for whatever reason the machine doesn't come with one i.e a second hand appliance, yes some people put the bolts back in when they get rid of their machines, the bolts are around 6 inches long, found at the back of the machine and there's 5 of them one on each corner and one in the middle. These bolts are used to keep the outer drum(tub/centrifuge) in place during shipping to prevent damage. By leaving the bolts in you are stopping the free movement of outer drum, thus causing the machine to act like you see in the video. Extreme damage, including but not limited to total destruction of the machine, will occur from repeat usage in such configuration and you may also void the warranty
We got a new machine Indesit and we thought we had to get it changed because it was doing this but after 2 washes we realised we hadn't taken the bolts out, it's fine now 😂
The stress I feel emitting from the video for me like I reminds me of my washing machine when it goes bad and you hear it fucking knock out the blue every now and then it's a nightmare💀💀
Ladies and gentlemen we have now arrived at washing machine hill we ask you to still all luggage and stay in your seats until the airplane has come to a complete stop we hope that you will fly destruction airlines very soon and enjoy all the sites and fascinating wonders of the new community of washing machine hell
We're 10 year and 3 washing machines in now but thanks for all your views and comments. Transit bolts are not obvious (and weren't in the instructions for this one) if you've never installed a washing machine before 🤣
So this Zanussi didnt last too long if you changed 3 by now hah
this is why you should always read the installation instructions before use. if for whatever reason the machine doesn't come with one i.e a second hand appliance, yes some people put the bolts back in when they get rid of their machines, the bolts are around 6 inches long, found at the back of the machine and there's 5 of them one on each corner and one in the middle. These bolts are used to keep the outer drum(tub/centrifuge) in place during shipping to prevent damage. By leaving the bolts in you are stopping the free movement of outer drum, thus causing the machine to act like you see in the video. Extreme damage, including but not limited to total destruction of the machine, will occur from repeat usage in such configuration and you may also void the warranty
We read them, but we couldn't find the bolts.
Jenny Drew NOT FINDING THE TRANSIT BOLTS BUT YES TAKE OFF OF THEM
@@jennydrew6078if you don't see the bolts there always at the back of your washer
That’s why you should remove the transit bolts before installing the machine
Imagine a washer smashing everything 💀💀💀
0:07 Vibration
Maybe its a Unbalanced Load Of Heavy Clothes.
don't know why but this is sooo funny
OMG Zannusi keeps unbalancing at Nighttime at 10:13 PM
We got a new machine Indesit and we thought we had to get it changed because it was doing this but after 2 washes we realised we hadn't taken the bolts out, it's fine now 😂
Like why are they not bright yellow with flashing "remove me" signs 🤣
user manual probably won't help with defective shock absorbers (15€ each)
Just step away guys. Nothin to see here. xD
Did you even take the transport bolts out? 😂
That's the best washing going, is it placed on an uneven surface
Do you still have the washing machine zanussi ???
Are you sure you took the transit bolts out?
Look at the description in the 1st one
Washing Machine Guy 20 Yes. It says we know NOW. I posted that comment over a year ago.
Jacob Nolan sorry.
Washing Machine Guy 20
No problems :-)
Clearly transit bolts need better labelling - we know this now.........
Jenny Drew пж
The stress I feel emitting from the video for me like I reminds me of my washing machine when it goes bad and you hear it fucking knock out the blue every now and then it's a nightmare💀💀
Ladies and gentlemen we have now arrived at washing machine hill we ask you to still all luggage and stay in your seats until the airplane has come to a complete stop we hope that you will fly destruction airlines very soon and enjoy all the sites and fascinating wonders of the new community of washing machine hell
And that's my nans zannusi again!
Never give it too much sugar
1200rpm Extreme unbalanced spin
Was that even the spin rpm
Spin 1200rpm to crazy washer
Broken Spider
But machine is was new spider didn’t broke
多多多在心
I removed the transit bolts in my zanussi washer it was fine, thats VERRRY unbalanced
youve left the transit bolts in theres nothing wrong with it
Why you don't click pause and read the manual!!! 😶☹
I had one of these and it was horrible. Had 3 months and gave up on it so decided to go back to hotpoint
David McGuinness hotpoint is shit. buy a hoover. my dad had one and it lasted 10 years
Roblo22334 i dont mind hotpoint me. Not a fan of hoover washers me
Hoover is shit
@@Roblo-gz5qp in my opinion some hovers are good and all the old ones are good but the rest I call poover.
Perché a certa gente viene permesso di usare una lavatrice???
If you turn off or pause the washing machine It would be much be easier
OMG Its off balance at 10:40am
ZAMUSSI
Es un bala
Buy a samsung ecobubble washing machine the latest one it so silent that you can't even hear it
dat nguyen worst choice. reason: my samsung blew its guts out!
Baaaah bad quality buy an AEG Miele or Zanussi! But Samsung phones tablets and Tv's are really good.
Spining 1200rpm
Transit bolts! This was not good for the lifetime of your washer.
Remove bolts transport 4xscrew
LOL
Shipping lags are still intact.
This Machine may have bad Bearings
I highly doubt it for such a new machine.
😛😛😛😛😛
Madre mía
Es un la pistola
And it clean your clothed better
zanussi
Turning off would have been easier
Sounds mean but buy a new washing machine of it keeps doing this
ruo shi bei wo zai zuo duo xin xi
Clearly transit bolts need better labelling - we know this now.........