The Manual has errors, but most Axial Manuals do... all small. You're doing a good service to everyone by pointing out the errors and explaining the solution! 👍👍 A few People here had the same issue with mounting the Servo. Any non Spektrum Servo.... You sorted it well. 😉 NONE of us understand WHY the reverse threads on the Links!! 😡😖 NO other Crawler ever had that. They're NOT Turnbuckles, and never need adjustments. That one's a mystery! 😲 As always Matteo, it was a pleasure watching you build!! It was refreshing whilst WAITING for my rare chance of buying a NEW, top line RC, like everyone else. It is close, as our Stimulus Checks should be here soon!!! 😁😁😁 I am very excited! Till the next Video my Friend! Unless you stop by my latest Videos. 😉😎 Please stay SAFE! 😷 Carmine ✈🚂🚙
I've become more careful when using a power tool, especially if putting in the screws for the first time. I had the issue, that they became pretty hot and when I removed the screw later, a lot of material came out with it (I think it was a Tamiya ABS chassis). It certainly depends on the material and the type of screw, but now, I only use moderate or slow speeds and when tightening down multiple longer screws, I'm alternating between them, so they can cool down a little. If the threads are cut/formed, it seems less problematic.
Just came across your videos. Fantastic build. Im with you on the power tool, I say power tool all the way, low setting 1 or 2 and slow and you shouldn’t have any issues. People! Don’t be trigger happy lol. Another channel to subscribe too
Love your vids Matteo, I am building mine too, but got impatient and could not wait for you, but wish I had, love the links into the driver tip. Manual was terrible I thought, luckily the kit makes up for it in quality. Same servo as me too.
Hoi Matteo, wurde das beim Hersteller nicht zuerst mal zusammengebaut? Ich kann das nicht ganz verstehen, dass du am Gehäuse abschneiden musstest. Fehler in der Konstruktion oder Herstellung!!
Das Problem ist, das dort Fremdkomponenten eingebaut werden. Diese unterscheiden sich halt ganz gering in der Grösse. Aber andere Hersteller konstruieren das so das verschiedene Produkte eingebaut werden können und nicht nur die aus dem eigenen Hause.
The servo mounting issue is nothing new. Axial built this truck like others to fit their own brand or cheap Tactic servos. Any other good quality servo will require the same trimming as you did. Also while faster and easier on the wrist, I would avoid using a power driver to assemble your kit. Disassembly is fine since the plastic has had the threads cut into it, but new plastic too risky. If you do, you should try to finish tightening by hand.
Yes, that's true. But I was carefully with tighten the screws. I recommend to use a power tool otherwise your wrist will be broken after so much long screws...
Call or Email Horizon Hobby to request a free pack of replacement parts for the kit. You need the AXI232017 Wild Boar Driveshaft set. The front drive shaft needs a long sleeve from the kit, the rear drive shaft needs the other long sleeve from the kit and the long connector that goes between two long sleeves. The kit made many mistakes and these mistakes make a click sound and puts too much stress on the parts as they are in the original kit. I am Brian D. and I love your videos. Get the free pack before running your truck more and risking damage.
The Manual has errors, but most Axial Manuals do... all small. You're doing a good service to everyone by pointing out the errors and explaining the solution! 👍👍
A few People here had the same issue with mounting the Servo. Any non Spektrum Servo....
You sorted it well. 😉
NONE of us understand WHY the reverse threads on the Links!! 😡😖 NO other Crawler ever had that. They're NOT Turnbuckles, and never need adjustments.
That one's a mystery! 😲
As always Matteo, it was a pleasure watching you build!! It was refreshing whilst WAITING for my rare chance of buying a NEW, top line RC, like everyone else. It is close, as our Stimulus Checks should be here soon!!! 😁😁😁 I am very excited!
Till the next Video my Friend! Unless you stop by my latest Videos. 😉😎
Please stay SAFE! 😷
Carmine ✈🚂🚙
Thank you Carmine for your always good comments! I see you have a big knowledge of these things! 👍😊
Thanks my dear Friend!!
As you know, I've been in the Hobby since 1984. Seen a lot of things come and go... 😁
👍Almost done! can't wait to see what you end up doing with it. 👍Thumbs up from me always!
Always a big thanks Steve! 😊👍👍👍
I've become more careful when using a power tool, especially if putting in the screws for the first time. I had the issue, that they became pretty hot and when I removed the screw later, a lot of material came out with it (I think it was a Tamiya ABS chassis). It certainly depends on the material and the type of screw, but now, I only use moderate or slow speeds and when tightening down multiple longer screws, I'm alternating between them, so they can cool down a little. If the threads are cut/formed, it seems less problematic.
Yes, it's true, we have to be careful with this. But without this power tool it is very exhausting.
Great job!!!! Nice work finding the flaws in the manual. It will definitely help a lot of people. 😉👌🏻👍🏻
Thanks Kingston! 👍😊
Just came across your videos. Fantastic build. Im with you on the power tool, I say power tool all the way, low setting 1 or 2 and slow and you shouldn’t have any issues. People! Don’t be trigger happy lol. Another channel to subscribe too
👍 Thanks so much for your nice feedback! And many thanks for the sub! 👍😊
Love your vids Matteo, I am building mine too, but got impatient and could not wait for you, but wish I had, love the links into the driver tip. Manual was terrible I thought, luckily the kit makes up for it in quality. Same servo as me too.
Thanks Marco! 👍 Over all I think also is a nice truck. 😊
Like to follow the building. Can’t wait to see it drive.
Thanks! 👍😊
Another great vid my rc brother 👍🏻 i cant wait for the Amazing movies you will make with it 🤜🤛
Thanks! Let's see! 😊😊👍
Super video cool das axial diesmal kein Plastikservohorn mitgibt
Ja, ein kleines Plus! 😂😂👍
Careful usuing a Drill on anything Plastic itll heat the plastic up & melt the threads.. 👍🏼Nice vid
Thanks, yes that's true! But without this it's exhausting! 😊👍
Great job on the video, it starting to come together 👍👊
Thanks again Kurt! 😊😊👍
Top wie immer.
Danke Thomas! 👍👍😊
Hoi Matteo, wurde das beim Hersteller nicht zuerst mal zusammengebaut? Ich kann das nicht ganz verstehen, dass du am Gehäuse abschneiden musstest. Fehler in der Konstruktion oder Herstellung!!
Das Problem ist, das dort Fremdkomponenten eingebaut werden. Diese unterscheiden sich halt ganz gering in der Grösse. Aber andere Hersteller konstruieren das so das verschiedene Produkte eingebaut werden können und nicht nur die aus dem eigenen Hause.
Matteo's RC Movies Danke für die Antwort, eigentlich schade, das stört etwas!
This is a very nice build, shame you had to trim the servo mount but hey, if it works then fine
Yes, it works good now. 👍😊
yesss good job
Merci Kaza! 👍😊
Awesome work Matteo. Which hex drivers do you use in your screwdriver?
They are from Arrowmax
www.arrowmax-rc.com/xcart/
Matteo's RC Movies Thanks! I figured they were and I picked some up. Thank you again!
I want to see how I drive quickly after completion.🔥
👍👍😊
wow so many different parts all with the same part number AX1232017 , how would one order parts if so many numbers are all the same.
Sind die Link in Stahl oder in Edelstahl ?
Ich würde sagen Edelstahl.
The servo mounting issue is nothing new. Axial built this truck like others to fit their own brand or cheap Tactic servos. Any other good quality servo will require the same trimming as you did. Also while faster and easier on the wrist, I would avoid using a power driver to assemble your kit. Disassembly is fine since the plastic has had the threads cut into it, but new plastic too risky. If you do, you should try to finish tightening by hand.
in earlier videos he explains that he finishes off the screws by tightening by hand, you can hear the clutch on the drill go of f
Yes, that's true. But I was carefully with tighten the screws. I recommend to use a power tool otherwise your wrist will be broken after so much long screws...
There are new pictures of the tamiya TC01 please tell me what you think.
I like it a lot, sure I'll build one.
A great video thanks
Thanks Mike! 😊👍
👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻🇨🇭🇨🇭🇨🇭
🙏🙏😊😊
Call or Email Horizon Hobby to request a free pack of replacement parts for the kit. You need the AXI232017 Wild Boar Driveshaft set. The front drive shaft needs a long sleeve from the kit, the rear drive shaft needs the other long sleeve from the kit and the long connector that goes between two long sleeves. The kit made many mistakes and these mistakes make a click sound and puts too much stress on the parts as they are in the original kit. I am Brian D. and I love your videos. Get the free pack before running your truck more and risking damage.
🔥👍👍👍
🙏🙏😊
👍🐒🇺🇸
👍👍🙏🙏