How I Made an EMP Generator
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2022
- I made a short-range electromagnetic pulse jammer that can temporarily disable electronics.
EMP Case File:
www.thingiverse.com/thing:572...
Parts List:
-High Voltage Transformer: www.amazon.com/dp/B07T3XDMH8/
-Recharge Circuit: www.amazon.com/DEVMO-Charging...
-3.7 Volt LiPo Battery
Follow Schizo:
Instagram: / schizo_san
Twitter: / schizo_san
Facebook: / schizo-101756288600257
Music by Karl Casey @ White Bat Audio - วิทยาศาสตร์และเทคโนโลยี
Wow, this old video from last year blew up a little bit out of nowhere, I'm really grateful to you all who are watching. Though, I have been getting quite a lot of comments and I wanted to address a couple topics regarding them. Firstly, I've been getting some comments about it's classification as an EMP generator, so is it an EMP? By the definition of an EMP to my knowledge, it certainly is. The device creates a high voltage in pulse waveform which the coil emits as a brief electromagnetic field. This occurs every time the circuit sparks, so it basically fires many weak EMPs in rapid succession, with some of those pulses being strong enough to mess with electronics. Given that, sure it's a shitty EMP, but it still counts as one. Still, enough of you brought it up that it's made me question my classification of it as such. Maybe I really am just wrong about what technically constitutes an EMP, but I'd appreciate some sources on that if you have them. Second, the toroidal ferrite core. I mentioned it very briefly, but I am and have always been aware that it weakens the strength of my EMP. Here's a story to help understand that decision: A few years ago when I was in high school, our small robotics club was adamant on bringing in some new members. Since we only had one robot to show off at the time, in a desperate attempt to have more showmanship in our interest meeting, they asked me to show off some random stuff I made at the time, one of those being an EMP (we're not gonna talk more about me carrying around an EMP device in high school). It had almost the exact same design and components as this one, just less well-put together and with the worst coil of all time (coils crossing over, sparks flying off of them). During our meeting presentation, as soon as I turned it on for our interested classmates from what I judged to be a safe distance (about 2 meters away), I returned to my fellow club members. The robot which had been working fine 2 seconds prior had suddenly shut down and we couldn't get it back on. My friend turned to me and said, "Jason, I think you knocked out Jeffery." From what I remember too, when we eventually did, the startup display was glitching and the program files had all apparently been wiped. It should be damn near impossible that my spark generator EMP could've even touched our robot from over 6 feet away, but our team was never able to think of another possibility. Realistically, while also unlikely, it might've been some kind of software glitch paired with one hell of a case of unlikely coincidence (hard to say since I'm not the one who programmed it). Still, after that experience, I've always been more paranoid working with pulsed electromagnetic fields since. If there is even a 0.01% chance that my EMP managed to reach that robot, I was not about to take that same chance with my only good camera. Therefore, I reduced the strength of the EMP by designing it with a coil that would have a much higher impedance. My goal with this video was to educate and demonstrate, not to achieve the most powerful device I could to end up on a government watchlist (I might save that goal for later. Dear NSA, that's a joke.)
Hi the link of the file is not available on thingiverse, I wanted to use the case without the emp part
I’ll upload a new one soon
@@schizo4725 I'm a new viewer of this channel but would like to applaud your work on this video. It was concise and interesting. I would like to see one done with a larger scale, say, to disable drones and autonomous robots... for educational reasons.
@@schizo4725 open to a private chat?
Interesting how TH-cam is just now spitting this out to everyone
The ferrite core of your toroidal coil is causing the overwhelming majority of the magnetic flux lines to stay contained within it rather than radiating out into space. This device would be dramatically more effective if you used a large diameter coil with no core.
new HyperspacePirate video?
Of course you are here :D
Waiting for your video on this ;)
Thank you lol. Next step, aiming it.
I agree. what he said😅
There's a lot of jokes I would like to make, but I really want to keep being able to travel by plane.
😂
need this for the new york subway for people with their bluetooth speakers.
Need it for a smart ass kid my boss es son video game
There are more effective alternatives online if you look in the right place
No just jam the Bluetooth frequency range. Still illegal just far less so and less likely to end up with free room and board.
Illegal
Sounds like domestic terrorism, you could disrupt sensitive electronic equipment in the subway genius. Put down the crack pipe.
Bros posting “How to: felony edition” for all us and I respect that
Hey man. When the AI goes skynet you'll be wishing you had a robot taser
@@williamdunn4811people need to learn how AI actually works and stop blaming all their problems on it.
We getting put on a watch list with this one 🔥 🔥 🔥
My buzzed brain read that as suicide list, potato potatoe
@@YourNavajoBroNot wrong tho getting put in jail for most/all your life may as well be ending yourself xD
@YourNavajoBro somebody's trying to get taken off the watch list 💀
@@YourNavajoBrogo Suns 🏀
Oh shut up
This looks cool, like an item you'd see in a video game - I'm imagining a survival-horror protagonist who needs one of these to get past a murderbot.
if you get rid of that iron powder toroid core and reduce the number of turns of the coil, the current spike will have a larger amplitude and a faster rise time resulting in a greater effect
I'm fully aware that you added the toroidal core to trap most of the flux inside and only the leakage flux to do the job.. but hear me out, you can actually make it "directional" by putting the coil inside a copper or aluminium pipe, basically something non ferromagnetic.. also keep a considerable amount of air gap between the inner wall of the metal pipe and the coil. This is to improve the shielding in radial direction..
Now next up you can improve the coil structure, instead of making it toroidal which will trap most of the flux inside weakening the em wave.. you can just make it "horse shoe" shaped with the two poles open and facing forward.. that way, a short range but more powerful em wave can be generated.. Note that if u do like this then you'll need two separate copper/aluminium shielding pipes for directing the em wave forward. That's all I can think of. Thanks for reading your build is great though.. good work👍
A robot lobotomy taser, incredible!
you wanna mean robotomy?
@@danielbecker7483 gold.
Before building anything you need to understand the underlying physics. This will make your engineering endeavors far easier and rewarding.
Yes, thank you! Now I can finally prank my friend with the pacemaker
Pretty sure this is highly illegal and I love it. I remember trying to find plans for cell phone jammers and learning that it would be illegal to walk around with one in public. Similar reasons for this project. Keep spreading that knowledge :-)
it’s not illegal if you don’t get . . . .
This is very low power, and therefore not illegal. In your microwave there is a 1000x more powerful device than this.
@@foximacentauri7891 Also a good reason for not disassembling your microwave unless you 100% know what you're doing
@@SirZechs77 really all you need to watch out for is the HV capacitor
@@janthranwhat's this cylinder thingy-
the coil around the toroid is concentrating the magnetic field, that is what´s making it inefficient. you want the field to spread outwards, the ferrite toroid keeps it inwards
Bro, this is pretty cool. I thought making EMP is quite hard. This might be quite weak , but it proves that the concept works. Great work!, +1 subscriber for you!
Good job, dude! You deserve far more attention
I recommend using an aluminum or copper case for more powerful EMP devices. I also recommend sealing it with any air-tight sealant, silicone rubber will suffice.
Beautiful work my friend.
I made a prototype of something like this. Good to know it would have worked.
Would you have any recommendations on books or pdf to bring my knowledge up to speed on projects like this
Amazing electromagnetic pulse generator
Is it possible to make one strong enough I can use it from my room to fry car radios when their bass vibrates the whole neighborhood?
Out here asking the important questions.
Do you think you could make a list for all the parts you need.
This is dope 👌
Done in the description! I found the switches at home and the Induction coil was taken from a random fried circuit I had.
@@schizo4725 Cool. Thanks for the information Man!!!
@@schizo4725 great vid but the thingiverse link does not work
It has like 6 parts, including the wire lmao
@@MichaelOfRohan has like?
Thank you I’ve been trying to understand in my little mind how this works
Awesome! New sub!
Can you by any chance upload a more detailed video or description on how to build the circuit aspect of things? I'm planning to make one of these myself based off your design! Let me know about and learning resources you know related to its circuitry please!
You got any contact info for potential collaboration on projects ?
This is great! Please use your device to test anti-EMP bags, pouches, and cases.
Coloca lo em uma angulo da pra ler as medidas de tensao que foram induzidas. Em outro angulo da pra reiniciar o aparelho medidor. E no medidor digital wasion de energia eletrica? Qual seria o comportamento.
No this is no EMP pulse as known from the scifi movies, but rather a strong electrical magnet that could easily erase ROM memory in various devices, thus effectively damaging the firmware. There is something like EMP pulse when a hydrogen bomb is deployed over the city inducing a blackout of non-protected electrical devices, which is majority of commercial electronics.
how do you measure the emf at the copper coil to make sure its effective BEFORE using it on something e.g with a multimeter
Gotta love those cold solder joints.
I used to like vaping because the devices look so cool but this is way cooler than that now that I quit
when making this would you leave a gap in the pin casing for the sparks?
Yes, it’s to prevent the circuit from being damaged by voltage surges.
Amazing how even simple electronics have error handling software to deal with unexpected stuff.
Nice job!
Very Cool, I don't plan on making it because I'd have the luck to break my devices with it.
Thanks schizo
Just a simple question that I can clearly see that you have connected one wire with the Coile (I mean the High Voltage generator wire with the Coile) but where you have connected the other wire ?
spark gap
Does this distribute the field in all directions? Or does it focus it forward of the copper coil?
This is marketable. Since everybody is carrying around an AI device these days I kind of want to carry around a small EMP device that shuts off the camera and they're listening equipment when they're near me because I have a right to not be tracked.
This is what researching engineering as a career in high school does to an mf’s recommended. Next it’ll probably be pipe bomb tutorials or some shit
“I promise mom, it’s for a school project”
Also what kind of casing have you put around the voltage transformer?
Can you test its effects on radio frequencies?
Dude, you must be our technician when _the moment_ comes.
Will this work on a pacemaker through walls from at least 10 m away? just curious
What type of courses do you recommend to learn how to build gadgets like this? Maybe not this in specific but you understand
did I miss the schematic drawing somewhere? with specific detail on spark gap length and the Toroid wind and inductance but it looks like a big series circuit on the output of the Marx Generator module. I have a Marx 'gun' with a 12x12mm microswitch that keeps burning out although its on the input side of the marx gen. in series with an 18650 (likely instantaneous current issues)
maybe you already solved your issue, but here it is: microswitches can't handle high currents. Use a relay (ideally a transistor or n-mosfet) as a switch instead. If using mosfet be sure the operate within the specs and use adequate protections about back-emf.
WE DISABLING THEM PIGEONS WITH THIS ONE 🗣️🗣️🗣️🐦🐦🐦🐦
Imagine what this could do if you upscaled the whole project to use a car battery.
quck Q . a transformer is an AC AC device and the coil afterwards works on AC as well , while you are feeding it DC, where are you doing an DC-AC conversion before that?
I wish my spare time projects were nearly as cool
That was so dope! Very simple to build than I excepted tbh lol you got a subscriber!
can you use to to disable things like magnetic locks in entrances of apartment blocks?
Verry cool! Please, make a test on cameras , especialy on cameras that can be hidden in hotels or air bnb places! We dont have a solution for this matter yet!
Dang your voice made me do a double take. It's so deep now.
New subscriber always watching your videos❤😊
How much inertial dampening or flux capacitance can this thing output?
wellp. looks like i found a use for a few of those old vapes i have..
neat bbq lighter, no quarts requires, just lp gas and a rack of ribs
The FCC wants to know your location 😅
So does the ATF.
do you have also a Guide for how to make that maybe very useful tool? do you maybe also know someone in Deutschland who is Electrician ?
Genius 🙌
Ah yes, this will come in handy in the technodystopia
toroidal core makes no sense to me, did you gap it? don't understand why confining the magnetic part
Hello can you tell me what circuits you used please
Make a very powerful one which also has a few metres range and is as lightweight as possible, then we'll talk 😜
Yeah, I'm not taking you to a casino
If it was really EMP device it would fry its own controlling circuit.
Whipping this out during the on computer SAT
Is there a diagram i could follow please
an air core on the torus would be stronger i think the iron core eats most of the magnetic field?
Grounding at the connector prevents the damage. Which weve done for like ever.
Now make a massive one and you can take out the whole grid
Does this work on an Airbus A319 plane and if it does where would it be placed? Asking for a friend.
I'm interested if it's strong enough to power an x-ray tube.
how do i inrease the effective range?
read description, or look it up
I want to draw my BP's like you they are awesome
1:53 hidden stories theme
Theory on what it would do to a BCI ? Stentrod or Neuralink ? Would it be temporary as well ?
Глушилка калькуляторов? Глушкал или Счетобой?
Can you send the circuit diagram
I need one of these for my neighbors stereo...
Great
I need to make this in a shape of a sonic screwdriver
Isn't the reactance of the wound toroid feeding most of the energy into hysteresis loss in the toroid core? I'm assuming you were trying to make sort of a poor-man's van de graaff generator toroid.
Wouldn't the best Emp device be just a magnetron inside a wave guide with one end open on the wave guide?
Parts you can scalp ftom a microwave oven. The magnetron and magnets.
Just take the door off the microwave oven and over-ride the door closure safety switch? Maybe not very directional though, and not frequency tunable (stuck at around 2.4 Ghz)
Careful
nice video men
Can not you just take two metal plates and connect them to Van der Graff generator ? When the voltage is high enough the spark appears between the plates which is plasma. All your devices will be affected.
are there exact design plans
what is the size of the spark gap???
Could you please post the wiring diagram?
WILL IT STOP A ROBOCOP OR A ROBOTIC DOG??
Congrats, now you and everyone that interacts with this video is on a watchlist 😂
i would like to order a few of these.... available?
I’m gonna make one with 4s lipo 10000mah 100c, maybe use 4! 59 Kwatt?
is the transformer just the external wiring?
Where did you get the safety switch and the trigger switch? I have scavenged the internet of how to find or make one but I cannot figure it out for the life of me.
Unfortunately wouldn’t be able to tell you where they’re from. I got them from a drawer filled with scraps and spare parts.
i just got drunk and soldered a copper wire coil to a electric fly swatter that i had dismantled to try and make more powerful. woke up with a broken gameboy, calculator, and a mess.