Residential Steam Boiler Maintenance Service for Beginners (and Experienced Techs)
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2023
- Are you new to Steam Heat as an HVAC technician or Junior Plumber? Or a Homeowner looking to be more "hand-on" with your steam system? MUST WATCH 45 MINUTES!
Call Long Island's Comfort Specialists Pipe Doctor Home Services & Mikey Pipes - Licensed Master Plumber & HVAC Contractor. New York - South Carolina - Florida : We've Gotcha Covered!
Let's Make The Trades Great Again!
Join Mikey Pipes Philanthropy, Inc., an IRS 501(c)(3) non-profit public charitable organization. Our mission is to offer free or low-cost plumbing, heating and cooling services to those in our community who can't afford to hire a professional. Help us here: www.paypal.com/donate/?hosted...
Curious on our dispatching and invoicing app? Check out HouseCallPro: bit.ly/46z2I5j
What’s in your Veto? Here is mine:
Veto TP-XXL amzn.to/3zX10vg
Testo Combustion Analyzer: amzn.to/3Zd7naH
Digital Manometer: amzn.to/3EDt5ey
Milwaukee M18 Blower: amzn.to/46iTo6j
Milwaukee M12 Fuel 1/4" Impact Driver amzn.to/3I9yLfI
Milwaukee PVC cutter: amzn.to/3sbrdUc
Mini Waterproof Storage bin: amzn.to/3yfgsEv
Wiha Allen Keys: amzn.to/33ipGmb
HIKMICRO B20 amzn.to/33iGklx
Furnace Switch amzn.to/31X89PT
Milwaukee Light amzn.to/3I38Lmh
Wagos amzn.to/34QoiaU
Milwaukee Set amzn.to/33vnQOz
Torpedo Level amzn.to/3no1oOk
Crescent set amzn.to/3GtZeV8
Wiha 7 piece set amzn.to/3rkISaK
Milwaukee step bit amzn.to/3I395Bv
Thermocouple Flare wrench: amzn.to/3noJZ8s
Ridgid 10” wrench amzn.to/3GvRnqa
Fluke non-contact tester amzn.to/31VQgAQ
Klein drivers amzn.to/3qoe21W
Knipex Wrenches amzn.to/3trzFjS
Klein 11-1 amzn.to/3tpsPLD
12” crescent amzn.to/3A0CZ6S
Gerber Gear Pocket Knife amzn.to/3foaW7I
Yellow Jacket Hand Ratchet amzn.to/3nrDgup
I am on Discord & WhatsApp!
Discord: / discord
WhatsApp Group: chat.whatsapp.com/CHZWtZe4KMG...
Mikey Pipes Uncensored: / @mikeypipesuncensored
New oval raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) ken@armoreddecal.com
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
Pipe Doctor FlexFit Embroidered Caps
Minimum donation of $37 is appreciated
(If you are international - please add a minimum of $40 for shipping/postage)
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
PayPal is: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes, Inc.
1010 Central Avenue, Unit B
Woodmere, NY 11598
#boiler #plumber #mikeypipes - แนวปฏิบัติและการใช้ชีวิต
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 57 [ซับไทย]](http://i.ytimg.com/vi/pNhft3YZFRE/mqdefault.jpg)
I always watch to the very end of anybody's videos you be surprised at what you miss out on when you dont!!!
Excellent video Mikey. I'm an HVAC/R tech in Boston MA and im trying to learn more about boilers and your videos do help me out a lot so thank you
Glad to help
You shouldn't use a impact driver on the Anode Rod any loose crap with fall into tank IMO
Your like the Chris Hemsworth of plumbing thank you sir 🧑🔧🔥
Wow, thanks
Lucky guy josh great boss , tuck that shit in don't forget your belt freshly ironed shirt be 1hour early to work and you will have and purchased just about anything you need in Life.
HEY MIKE COOL VIDEO AND GOOD LUCK JOSH ON JOING PIPE DOCTOR TEAM
Thanks
Anyone with Gas Equipment should Highly Consider a Maintenance Plan. I have had Plans for 30+ years and 2 years ago a Cracked Flue Pipe was Discovered. 👍🙏
Or….one could learn about their equipment and maintenance it themselves
Good Job Mickey very professional pays 0ff right tools for the job! Amazed all tools have now trade came a long way since 1987 for me! Always learning.
Wow 😮 that was unusual spotless clean 0.0. Now job an excellent description too!!
Welcome Josh. That boil is so clean for being 15 years old.
GREAT !!!… finally a new ‘er Peerless steam boiler….. thank you Mike …. I will email with a photo of mine 1960 Peerless boiler…. Always clean it ….
Sounds great!
Excellent job, like how you told the homeowner that things may not work after cleaning.. I see your van inspection will be up next month😅😅
3:38 check the installation recommendation Peerless sometimes goes to 1-1/4 on their equalizer
Very educational about the gas valve. I won't be touching one, but thanks. Happy to see you training a new guy.
Thanks for watching!
come on now Mikey, you want to be that way, when Jesus return.@@PipeDoctor
nice outro clip i learned even more about my water heater thanks to you lol
good explanation. perhaps you could do a hydronic boiler(Hot water system) maintenance service one soon, so I can see what that's like!
Oh my Gosh, Josh. Welcome to the Pipe Doctor Family. He seems to know a bit already. He knows how to put PFE tape on the right way and knew other things. Good luck Josh. Make the trades great again.
You got yourself a good one. Im happy for you. Loved the USA on the 90's and 45"s. No nonsense josh. He gets in, gets it done, and gets out. Plus hes experienced it comes across as. Youre a great teacher, in fact thats a skill you can leverage.
Looks like you may have a winner with Josh. Best of luck!
I would have replaced the old thermocouple as insurance
Yeah you’re probably right
Feerless Peerless. Best built cast iron boilers out there.
Welcome to the family Josh. Looks like he will be a great addition to the team.
Keep up the great work educating people. I tell my tech to watch your videos. Always something in our business you learn. We do a lot of force air not to many boilers. Definitely no steam. Not many steam boilers in our area.
Ya, I took the class from the company that toured the country teaching CO testing. Some stuff was good but other things they told guys to do violated the UL rating. When you talk to technical support on these basic cast iron boilers. Minimum inlet pressure and as close to 3.5"wc is the prime setting. If your combustion analyzer shows you can do some efficiency adjustments, technical support will say 3.5 is more important. So long as the manifold is set and co is not unstable or over 400ppm they have nothing else to say on the matter. I have had some issues and they said 3" even was the absolute limit but it was a case-by-case issue.
By looking at that thermocouple i think it should have been replaced. You said life about 7-10 years
Peerless allows 1.25" equalizer. Even models where they require 3" header.
Peter Pipes out on his own now?! Good to see you working a new guy and being informational at the same time! I try my best to do the same for our apprentices.
Seems like Josh knows more then peter peter needs to pick up the pace!!!
Josh is an experienced service tech.
Retired service tech after 45 years don’t have much steam on my work experience,not much around my area, love your videos very fascinating,thanks for your part of making trades great again.Yep we went thru a lot of apprentice also.A good tech can make the stacks😊. But must have understanding family about late hours,ie not always 7-3. A lot of time spent thinking on problem jobs after time clock not running
just something I was told by an old timer in the 90s. we were working on a commercial gas fired unit that had no gas flow. Water had accumulated in the gas line. It was lacking a drip leg. He said had the 6" drip leg been installed, the gas flow would have been ok. HOWEVER..... he also noted these were being phased out because gas has become much dryer over the years. In years past it wasnt uncommon to have condensate in piping. Many would disconnect the piping and stop gas meter charges and reconnect in the fall for free, thereby saving money. Just food for thought. This was in NH.
I have a broc water heater, and the manual says not to put anything on the treds of the anoid rod. It needs to make contact with the metal surface to work properly. Teflon tape will prevent the proper contact to the aloud rod.
How about paint what the pipe is and the direction of flow?
The one yesterday was two years old to🤣
lol
Maybe 22
But I noticed the customer didn't put in a steel chimney liner. So I assume it's still taracota liner you have to check the chimney base for build up.
How do you like the wholer? That’s what I use. You can also use it as a manometer
Giving a huge welcome to Josh 👍👍
You will go places with Pipe Doctor with Mikey and Daniel’s training. Congrats on your new job and career!
:)
Excellent informative video as usual from the ol’ Pipe Dr!! But now I’m curious as to what you did with Peter? Did he get let go?
You got a lotto ticket with Josh.. he has the potential to be a HVAC beast with your help. I see such potential in your apprentice.
Very Nice en Educational video. I do appreciate that . I would like to suggest you in the tuneup for fresh customer.i would be check the heat change from underneath with a mirror or camera to see if any carbonizing start it. And me I would like to check my low water cut off when it’s running make sure when it gets dry even though the lights come on I want to see if the gas was shut off that’s it but everything else was very very nice. Thank you.!!!
Ok thanks!
Ok thanks!
Thank you so much for the information. I am finishing up residential HVAC school in the twin cities area of MN and what I have learned from my textbook and my professor is that steam boilers are commercial/industrial. It was very eye opening to me that they are used in residential as well. Do you need a boiler license to work on residential units where you live?
Wait a minute Nathan, HotDog what do ya think
No
Mikey Pipes: if the automatic water feeder gets stuck in the ON position ; the boiler will fill up, but how could it fill the upstairs radiators too? wouldn't the water come out of the pressure relive valve and only flood the basement ? That was my experience recently .
Hey Mikey. If you unscrew thermocouple from gas valve, isn't pilot flame supposed to immediately go out ;)
What are your thoughts on powered anode rods? Good video. I may share the link with some of my guys :)
I like it
One minute gang
Huh?
Means I arrived early. Hha
Hopefully U Tube will get rid of the 2x video. I hate it
J-Josh for Jesus josh(when he messes up you just yell Jesus! Josh) Joshinator, JP(Josh pipes) , joshzilla, j-thunder, j-man. There could be alot. Lmao... J-savage, joshapalooza, Josh meister, J-zues
Is that the same thing as a y or Y8 do you have to skim the boiler then
I've watched this video a few times because I have the same unit. But I still can't figure out how to drain the water and the manual is useless. Where is the drain valve on the boiler? I also want to clean the sight glass but I don't know how to do that.
edit: I think I know now where the drain valve is supposed to go. It looks as if someone removed it.
Mike, valve tags is a great idea. What company you buy from?
I get mine from Footbridge Media
Thank you Mike
He looks like my 😎 brother
👍👍
I’m currently trying to figure out my boiler. Confusing as hell it looks like mine has too many valves but I can’t seem to find a sight glass tube anywhere on mine; is this normal? It does have a pressure/water gauge though I’m assuming it’s the same thing but perhaps not…
Learn something new every day
What happened to the other new guy from a couple of weeks ago. Did you frankyize him.
he didn't make the cut
Look
I thought you had to use a non ferrous metal?
Mikey, why wouldn't you use the testo 310 to check gas pressure also even though you didn’t use this tester on this video but I seen other videos you’ve done where you didn’t test the gas pressure with the Testo
I like using my manometer
@@PipeDoctor do you think it’s easier or is it more accurate you’re monometer
The nee nickname uh humm
👎🏻
Anyone can tell me a good book to learn boilers sistems🤔
wd40, oh snap, og is gone, what was it and what is it now, that is is the question to answer.
I haven't seen your videos for a while?
I've been on vacation. Returning on 03/01/2024
I should have said 8y
😂mikey
Hi 👋
@@PipeDoctor
My best PLUMBER
What happened to Jose?
He didn’t make the cut.
Whatsapp link not working
Josh Kosh B’Gosh
8y
Come on now Mikey, do you want to be that way again, when Jesus return. lol
Haha, I'll try not to be too mischievous when Jesus comes back! Thanks for watching and commenting!
Bad draft