The CRF150RB Gets Some Upgrades! | (Alexis Installs)
ฝัง
- เผยแพร่เมื่อ 23 พ.ย. 2024
- When Alexis picked up this beautiful 2016 CRF150RB it was already packed full of upgrades and add ons. But there were a few things she wanted to switch up to start making it her own so in today's video she takes over the shop and gets to work!
Starting off with the brake lever she was having trouble feeling the skinny stock one with her boots on so this aftermarket Tusk lever made for a great replacement. After that she notices how filthy her air filter is and swaps it out with a freshie using an old trick from cheap ass AD!
To wrap things up she installs an aftermarket gripper seat cover which not only will help keep her locked in place but gave the 150 a fantastic look.
What do you think?!
Seat Cover: amzn.to/2WIOBJF
Air Filter: amzn.to/2WIOBJF
If you use the links above, I get a small commission. The support means the world!
#CRF150RB #CRF150R #Honda
Not gonna lie I thought I was gonna get bored of watching after 3 minutes but I'm actually making it till the end so far so good👍
Tusk needs to sponsor her 😂
She’s a keeper boys
Yessir
The bike or the girl? 🤣🤣🤣
you all probably dont give a damn but does someone know a tool to get back into an instagram account?
I somehow lost the account password. I appreciate any assistance you can offer me
@Killian Aldo Instablaster =)
Seat cover makes such a huge difference 🔥
I got a blackbird racing seat cover. Super grippy the oem honda one was really slippy
Thank you so much guys there's never a time I don't learn from you guys
Cooter pin lol 😂🤣... good job lexis
There's cooter?! Where
Died when I heard her say that lol 😂😂
Pretty good! My CR80's seat needs redone, it looked like peanut brittle before I did the lazy white duct tape over it.
For seat covers,,, HEAT GUN OR HAIR DRIER , warm it up and it will stretch and form to the shape of the foam real nice n tight.
Light spray of upholstery glue over the foam helps the foam stick to the plastic base and keeps the seat cover sealed from water.
ooohhhh a black and red restyle kit would look sooooo gooood with the seat
Looking good. I love the foot pegs, shifter and brake lever. Would look great on my CRF250L. I always say "It's not a project until you bleed on it."
Nice job! I'm impressed.
I would apply some white lithium grease on sealing ring of air filter.
After washing and drying my air filters ( I have 3 for each bike)
I use maxima sticky blue filter oil. Stuff is super nasty but catches everything. I put a big splash in a plastic grocery bag, drop the filter in and rub the oil into the filter. I put lots so no area gets missed. Then on the filter seal (orange part) I use waterproof bearing grease and enough of it. Clean air filter every ride on 4 stroke race bikes is a absolute must... they rev super high so that means crazy amount of air going through the engine at max rpm. If sand goes in, its toast.
Be sure to inspect the seal and make sure its perfectly placed. Last clean the securing bolt and grease the washer to stop the sand from entering. In the 80s we used chain saw bar oil , it worked. But the maxima sticky stuff is the best stuff I've come across, I clean my filters in a 5 gallon bucket with a raised screen floor in it so sand goes to the bottom, wash with dish soap and water. Squeeze and hang dry in a dust free place
🤦♀️ Diesel! I lost it 😂. He's a good dog and absolutely fits right in to your little comedic family vids.
Sweet video girrrl looks amazing and great job keep the great work cant wait for more
Thank you so much!!
Perfect timing... I just purchased a tusk brake lever as well
Alexis done a great job doing her upgrades. Looks great
mcbrand06 great*
There’s only 1 problem there’s no performance mods
Cooter pin!!! I love it. Thx Alexis
PS I've been offline for a couple of weeks due to this scenario we live in but gunna binge watch your back catalogue tonight!!
Some black number plates will look good with the seat
The hardware that came with the brake pedal is to have the engine mount bolt go through the hole of it. If u take a digger then the cable will most likly rip through the plastic skid plate
She killed it! Great job!
Awesome video Alexis, You killed it.
Alexis YOU KILLED IT! awesome video, youre a PRO! You cant not start up a channel after that killer edit.
Use fab 1 for lubing air filter a can lasts years and makes it super sticky and its blue so u can see
Wow great Job Alexis . looking forward to seeing you wrenching on more bikes.
Great work Alexis. Your bike is beautiful and to your liking. Nice to see u do it all yourself. Keep up the great work!!
I was expecting to read “builds by Elky” 🤣🤣🤣
Excellent job Alexis. You and Tanner are my favourite You tubers. Keep up the great videos you two.
Every girl in 2020:
“So I bought this off amazon”
Lmao
What's all this sexism about in the comments. She's a normal functioning human who knows how to make good decisions for her bike
@@the-unibrow-kid3728 lmao u know nothing about bikes bud
@@trentkeddy8865 how did you even come to that conclusion, not talking about that. Whatever BUD
Lol stop it you
I love the 150r It’s great on tracks but if you ride it in the woods like me it’s awesome to climb up hills that go straight up like walls
This video could be called hot chicks work on stuff! HAHA!
I’m sure you are liking the brake lever. It looks cool and it is functional. I just cut the cord off of it tho because it got in the way when I wanted to work on the bike
Tusk also makes a SPRING PULLER. 😉 Also, use No Toil on your filter.
Great vid! I needed this help
Great job, Alexis! Im impressed that you know the correct termanologies..... “Cooter Pin” 😂 Ride safe!
Diesel started barking and Jack went nuts. He understands.
Dogs unite
Should put grease inside the brake pivot when you have the bolt out.
Good job Alexis might be on to somethin with that bar filter oil lol 😄
Great job! Replacing seat covers suck! But u did a good job looks minty👊
Cool vid, and also you don’t have to have that piece of foam covering the hole above the mud flap at the bottom. They don’t come with it.
That rear brake pedal is cool. Seat looks great. Good work!
Tanner, you're fired! :)
I agree lol
Awesome video..great job,learned something.
Great vid girl bike looks nice! God bless.
You 2 should just open a shop to fix and flip bikes. Also a tip for Alexis. If a guy tells you to smell something, you probably shouldn't.
I like the lex only videos lol dont take it wrong tanner she is much more pretty
Great job on the seat Alexis ,looks like a very tedious procedure.Bike looks great!
Nice skirting work Lexi!
Alexis has a sick bike. On my 150rb does the coolant pump and radiator make noise in general?
Nope. Check the water pump bearing and impeller. The impellers are known to fail. Dont ride it till your sure it's ok. Boyesen makes a real good Impeller upgrade.
You dont want to over heat it and blow the engine. FIX IT....
35 years wrenching mx bikes. Trust me
@@endurotruckererniedesjardins I do know its working good cause the return hose is hot after a good rip I'm just making sure, its my new bike I'm not use to the race four stroke I went from a trail bike to a high strung beast thank you so much for the info!
New favorite TH-camr
Loved the new seat looks amazing
I waiting to see an African Twin purchase and review ---- then resell
Love your videos guys great job alexis
My quad going to the shop next wendsay!!
I like her vids no show boatn lol i could get use to this tanner does make a better camera boy than host lmfao 🤙🤙👍
Her 390 duke review on her own was amazing.
Great job Alexis ! 👍
I have an ocd with that bubble in the seat 😂😂😂
I’ve never seen a brake lever that came with a wire the mounts to the skid plate before. I feel like it would get in the way but I guessing it doesn’t.
Cusefan8 stick deflector
The cable is a safety feature that prevents the brake pedal from being bent outwards in a crash. Factory racers do this all the time. Not meant to be mounted to the skid plate but usually to the frame.
Its called a brake snake. They have been around since Christ was a child.
Hey good job, it looks great. Keep it up guys... 👍🏼👍🏼👊
Nice job Alexis!
Nice work
Nice love it
New bike parts are the best :D
Damn it, stop throwing stuff on the floor of my shop for me to pick up and disorganizing my shop! You already do this to the sewing room, spare bedroom, laundry room, dining room table, kitchen, and all the closets you do this too! Wait... these may be my fiancee's problem. Anyone else have this problem?
Professor teaching the pupil.
Great Job Alexis !! 💞
Nextime do a "Ladybug" on filter (straight from a bottle) squish it and spread it 👍😎
Guts racing Has Seat foam for the 150rb
Wooooo!!! 😂👍
Good looking girls and bikes 🥰 already know all this but keep waching anyways 😂
Oh ok Alexa taking over some get a sponsor
love them bikes getting a r or rb in a few months depends on how tall i get
Hi! loved the vid, how tall are you? I am looking at getting this bike since kx250f feels to big I cannot reach.
Never seen anyone oil an air filter , what’s the reason?
Keep dust from passing through, mainly on ORV’s.
Wait... did you end up getting the crease out of it? That was the hope in seeing the whole video (and what you did to fix it). I have to fix the cover on my Son's bike which had the same crease. Oh joy
This is such an older video and we no longer have the bike but from what I can remember we had to un-do some of the staples and just pull it much tighter, it's easier with an extra set of hands for sure.
@@AdventureDaily thanks for the update. I'm going to give it a try sometime this week. Just hoping the foam is in decent shape under the cover. Thanks for the tips
This content is godly
that is why i remove my seat each and every time i wash my bike. (with an airbox cover)
Hey Alexis, what brand (model) of tire do you run on your 150?
Noah Gabreski kenda trakmasters!
Your so cute Alexis keep up the good work
is it possible to change the foam to a wider one? like the ones on the Xr150?
What size staples did you use for the new seat cover?
How cute it is if you'll be having a child with mr. Adventure daily and soon becomes a rider.🙂
his transition has gone really well
Her
I'm 5'5. Am I a good size for this bike?also I'm a beginner should I get the 150rb or the 150f
You could sell that leather on offerup or Facebook for someone whose seat is torn
Lex Absolutely! We will probably keep it for backup.
Nice Video!
Why didn’t you just get air filter oil and why didn’t you put waterproof grease on it???
Graphics should be next
Next time put some oil in a bag then put the air filter in the bag then it’s gets all over it and it’s not a mess
Smash the like out of the f##k button fam!
Hi, why did you attach the cable between the foot peg and skidplate?
Keeps the brake lever from getting bent out on the trails.
I use brake cleaner on my air filter
Nice job
@ 11:18 who else heard that rip of a fart lol 😂😂
My dirty
air filter is the same as there clean one
A Diesel f.....g the momentum.
Mi amor más me gustó el original se ve bonito en rojo saludos des de ecuador 👌😘
Safety glasses maybe?
Aaron Anhalt Shut up Safety Sally
I bout the same seat cover, color and for the same bike 😂😂
Can you send me the link to that skid plate please.