Mini PVC Pipe Green House Build
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2018
- DescriptionThis is mini PVC Pipe green house Speed Build. I made it a couple of years ago and only used it for one spring. I am not going to use it again so I am planning on selling it. This is showing how it is built so when the person buys it they can watch it being built.
DescriptiAlan Walker - Fade [NCS Release]
TH-cam Video Link: • Video
Social media links:
➞ Facebook / alanwalkermu. .
➞ SoundCloud / alanwalker
➞ Twitter / iamalanwalker
➞ TH-cam / djwalkzz
➞ Instagram / alanwalkerm. .
JPB - High [NCS Release]
TH-cam Video Link: • JPB - High | Trap | NC...
Web Site Link:
➞ SoundCloud / anis-jay
➞ Facebook / jayprodbeatz
➞ Twitter / gtaanis
➞ Instagram / gtaanis
Valence - Infinite [NCS Release]
TH-cam Video Link: • Valence - Infinite | F...
Social media links:
• / valence-music
• / miguel_valence_
• / valencemusic. .
JJD - Adventure [NCS Release]
TH-cam Video Link: • JJD - Adventure | Glit...
Social media links:
• / jjdofficial
• / jjdofficial
• / jjdofficial
DEAF KEV - Invincible [NCS Release]
TH-cam Video Link: • DEAF KEV - Invincible ...
Social media links:
SoundCloud / atm-dubstep
Facebook / atmdubstep
TH-cam / atmdubstep
Different Heaven - Nekozilla [NCS Release]
TH-cam Video Link: • Different Heaven - Nek...
TH-cam Video Link:
SoundCloud_ / different-heaven
Facebook___ / differentheaven
TH-cam____ / differen. .
Twitter____ / differentheaven
on - บันเทิง
So cool! I love it! I made one Dome style with PVC, now I'm looking to make one smaller for my cool weather crops! Thank you for sharing!
I did one similar a few years back in 2008, Quite a bit larger than what you have here in your video. Mine was 20X40ft. It`s STILL going strong. I glued & fiber-glassed the joints so none of them would move over time, was less than HALF the cost of making one from treated lumber. VERY happy with the total outcome of it. There WERE some specific angles needed for the peak/pitch of the roof because 45-degree`s was too much and the fittings are not made in anything other than 90 and 45`s so what " I " did was have a box of HEATED sand (hot enough to only soften) and set each fitting in and bend them to my desired angle. When doing this?, you DO need to insert a scrap piece of pipe into so it will hold it`s shape once they have been heated up. Also have you a bucket of cool water to cool-set each piece for faster work time.
Did you first do a mock build before you glued it?
@@alizcool1 No mock assembly was required because my measurements were spot on.
@@pawpaw4911 but when you're joining it all together what if you missed a piece etc
@@alizcool1 It's all assembled on paper "Like" a blueprint and checked before the actual gluing assembly. I`m a Pipefitter by Trade and that is how I learned to do it in the field because there was no room for mistakes.
@@pawpaw4911 that's awesome how much did it all cost you
Superb idea, thank you for sharing 🙏😀🎉🎉🎉
Well done! Thanks for sharing!
Very nice project, thanks.
Well done 👏🏾👏🏾👏🏾👏🏾
Very cool design and nice video, but the music is horrible (lol)!
Nicely done 👍
Super g led light line work
Thank You very much for sharing. I was thinking to do somethig in my patio, and I think You just gave me a great idea. Please change your música to something mire relaxing.
Awesome job!
Thank you. Glad you enjoyed the video.
Great Sant
Super🎉😂
👌👌👌👌👌
Aha, thanks, you gave me a brilliant idea for a solution I've been looking for! :-)
Glad I could help find a solution you were looking for. I hope you enjoyed this video.
Great video
Thank you bro !!!
Kkkkkkk crazy
Greetings from Texas! Do you have the plans for that build still? If you do, could you email me them? Thanks!
All that work , should've added another 8ft to have some real room .
Que materiales usaste? Que medidas?
What are all the pieces used an the measurements?
have a video on how your installed to plastic on the greenhouse shell
No I do not have a video of how I installed the plastic. I used Zip Ties and Spray on Plastic Adhesive to put it together. I also cut the plastic to be big enough to fit the structure. I hope that helps with your question.
Can you give the templates.
I really wish you had a plan laid out because this is the exact greenhouse I want to build but the camera is too far for me to see everything your working with..... :(
I do not have drawn up plans for the green house. I do know that the base of the green house is 5 feet wide by 5 feet long and I think the green house is 10 feet or a little taller. I used 2 inch PVC Pipe to build the greenhouse. Also for the corners I used a 2 inch schedule 40 PVC Pipe side outlet elbow socket. I used a chop saw to cut the PVC pipe. Also I used 1 and 1/4 inch screws to hold it together. I also use clear 6 Mill plastic as the cover to keep the heat in to grow your plants in it. I hope this information helps to answer your question.
Gd day sir! Ur tutorial r awesome!! Thank u!! I hav a question, if I'm using a 20mm pvc pipe can I still use a 20mm joint/elbow to connect it together? Or do I hav to get a bigger joint/elbow?
The 20mm elbows are designed for the 20mm pipe
@@alizcool1 woh...
How much did you actually sell it for?? Just being nosy :)
do you have the plans and measurements?
I do not have drawn up plans for the green house. I do know that the base of the green house is 5 feet wide by 5 feet long and I think the green house is 10 feet or a little taller. I used 2 inch PVC Pipe to build the greenhouse. Also for the corners I used a 2 inch schedule 40 PVC Pipe side outlet elbow socket. I used a chop saw to cut the PVC pipe. Also I used 1 and 1/4 inch screws to hold it together. I also use clear 6 Mill plastic as the cover to keep the heat in to grow your plants in it. I hope this information helps to answer your question.
@@fiercelionvlogs7428 : Thank you!
@@fiercelionvlogs7428 what kind of screws- self tapping?
@@corribyrne1481 I used 1 and quarter inch external screws to hold it together.
@@fiercelionvlogs7428 - Yep me too. I have been working on my project too lately- using the same screws- 1 1/4 pvc pipe. I found a specialty pvc supplier online that makes all sorts of crazy tees and fittings. Even for geo-domes. The screws are better too for changes. www.pvcfittingsonline.com/
Good video but the music is not good.
👨 :
What type of tube? and what diameter?
I used 2 Inch PVC Pipe to build the Greenhouse. I hope that helps.
@@fiercelionvlogs7428 2 inch or 1 1/2" as you state elsewhere?
Share Measurements pls
Why didn't you save on all the screws and use pvc adhesive?
I used screws because I needed it to be able to come apart for storage.
@@fiercelionvlogs7428 Oh I see, I'm looking to create a permanent structure so would use glue.
why is my pvc frame fall apart?? you dont explain anything
You got to use 1 1/4 inch screws to hold the PVC Pipe and the Fittings to hold the frame together. I put the 1 1/4 inch screws on all four sides of the PVC Pipe Fittings and that goes through the PVC Pipe as well. I hope this helps you with you PVC Pipe Green House.
Never mind. I see you already commented down on someones.
Must have cost you loads on screws dude????????
The PVC Pipe cost a lot more than the screws did. I maybe spent between $16 to $18 dollars on 2 boxes. I used about a box and a half of the screws.
@@fiercelionvlogs7428 total cost of project
Looks cool but 500$? Why? Doesn't add up..
Measurements?
I built it 5 feet wide and 5 feet in length. I think the walls where about 7 feet tall and the roof added about another 5 feet in height to it. I hope this helps.
Con un pegamento no sería más fácil avanzar
Do you have plans for this?
No I don't have plans for this green house. It was 5 feet wide by 5 feet long and about 10 plus feet tall. I used 1 and a half inch pvc pipe and 1 and a quarter inch external screws to hold it together. I hope this information helps you to build 1.
ขอบคุณสำหรับไอเดียดีๆครับผมจะลองไปทำดูนะครับ
What happend to your nose..
I had Ance on my nose.
$500 my ass
The man is entitled to receive the value of his design, measurements and labor in assembling this one. He was kind enough to provide this video if your "ass" would like to make their own.
what diameter and thickness is the pipe? 2" schedule 40?
I believe I used 1 and a half inch PVC Pipe to build the greenhouse I built.