Vevor high pressure pcp air compressor update.
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- Ray you and others have been asking how's the Vevor doing. We'll see for yourself. I hope you guys enjoy.
Deals
XVision
www.avantlink....
10% OFF Sniper Scopes
classic.avantl....
Optics Planet
www.avantlink.....
Pinty 10% off
pintydevices.c....
10% OFF all purchases from Texas Precision Optics
classic.avantl....
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
Duel fans is why I like it, keeps the unit cool.
Thanks a lot for the update. I did end up getting the Vevor and use it quite a bit for filling my PCP air pistols. So far it has been great, but I have yet to try it on an Air rifle. I have a nice RAW rifle on the way and will run this Vevor for as long as it lasts.
@raydash2898 The Vevor has been good to me once I fixed the gauge but to be honest right now the only compressor of the 3 I'm using is the Yong Heng and the only reason is because of how quiet it is. One thing that would make use the Hill is I have a long slim connector on it and it's the only compressor that works on some guns but I haven't shot them lately. Still I would recommend any of the three I have now.
Just got my Vevor.
Haven't tried.
Only tested pressure.
It's newly released.
Has twin fans.
334 to my door is very good price.
I want the GSC 4 but it's twice the price
@raytruesdell7873 so how's it running?
So I just bought a Kral Puncher Jumbo and will probably grab a Vevor compressor like the one you have here as I like the dual fan idea. But my question is I know the Kral guns have a different fill probe how do you interface this compressor with the Kral fill probe? Is there an adapter I need to get? Thanks great video!
@Albiemanmike I have a couple of Kral and no adapter is needed.
I've had 3, first orange lasted about 3 months. Second small blue sub $200 lasted 14 months, the second orange one which was a replacement for #1, I pulled out of the box was DOA, will not pressurize. Going GX this time or the super cheap Vevor and just turn them over yearly.
@wd229 well I guess that's a way to look at it. All 3 of mine are still doing what they should.
in my opinion the vever did not take long. course that plug that comes with the vever to do the 30second to 3000psi test is best.because as long as it pressurizes to 3k before 30 seconds has elapsed it is good.
your compressor has done better than mine.
course mine still works just not with the autostop. but i am cool with that.however long the compressor lasts i already have the replacement parts so i can run it into the ground and that is fine.
hope you are doing well , and yeah i have already preordered my challenger elite 51cal from terry fox.....
@the last word That sounded like a drop the mike comment. 😝 Thanks for stopping by. Let me know how that Elite works out for you.
Nice Kral you got there 👍👍 I like it
@Mikes Backyard Eh! you always have - LOL maybe because it's brother to yours!
Loud but if it works great be safe everyone
There should be a reason that Vevor uses double (and louder) fans than the Yong Heng. Does the Vevor has a bigger motor? (more power wattage)
@Harolddespui it's rated at 5000 psi but if you look at my video when I open the case it's a very small motor. I have never opened the Yong HENG so I can't say if it's bigger but I would assume not. It is roughly the same size as the GX CS3 which I did open when I had it.
@@bluecollarsportsman613 Could the Yong Heng have heatsinks round the cilinder head which the Vevor has not?
how does the yong heng and vevor compare with the gsx3?
@bretshivers8352 Both very comparable except they have they inverter built in. The Yong Heng is probably a little quieter but the GX3 has the cables attached on the side of the case. The Vevor most definitely louder but rated at 5000 psi. The Yong Heng is my choice because of warranty.
whats your recommended temp to keep it at and how long should i run the unit
@gboutdoors5198 I keep mine in the house so I can't give you a recommended temp to store it at. If you are talking run temp. Mine read in Celcius and I haven't bothered converting. I run both the Vevor and the Yong Heng 30 on 30 off but that only applies to when I'm filling bottles otherwise I never get close to a run time issue. All 3 of the compressors are running fine. I actually use the Vevor the least only because the Yong Heng is quiter and I use the Hill to fill my bottle. If you have any other questions just let me know.
@@bluecollarsportsman613 alright thank you and I meant run temp so keep it at 30 Celsius?
@@gboutdoors5198 No, I never really monitored the temp because I didn't know what Celsius was in Fahrenheit so what I do is just monitor run time and I don't exceed the 30 mins on 30 mins off rule. Again I hardly ever run any of them outside. My house is always somewhere between 70 and 75 degrees.
@@bluecollarsportsman613 alright ive been just really worrying about the vevor i heard heat is what kills the vevors
@@gboutdoors5198 I can run it and tell you what my temp is, that's the best I can do. Sorry about this one. The best thing I can tell you is that the Vevor fans kick into a higher speed than most compressors I have ever used which I think addresses the issue you just mentioned. The other thing is that unless you are going to be filling tanks I don't think you will ever run into an issue. When it comes to filling tanks with small compressors, I would recommend small tanks for the longevity of the compressor and by all means that no more than 30 mins.
Hey Dad do you like these better than the GXSC3 ??
@Timmy Yes but only because the inverter is inside. I would love to have the new GX4 once they put the inverter back inside.
@@bluecollarsportsman613 my gs3 arrived today, is your's still working?
@@mabbagorro You would have to ask Southern Gunner. I traded it to him for the AEA Challenger Pro. Las I heard it was still chugging.
I like both compressors, I don't have one 😅 I need a compressor though
@BIG EARL don't tell me you hand pumping BIG EARL!
@@bluecollarsportsman613 naww, I have a tank that I get filled up at the paint ball shop ..
I seen a water cooled compressor, I figure it would be better because it's water cooled like a radiator in a vehicle
@@bigearl8687 How much is it?
Dad is the black one in the video a yang han ?? If so do you like it ??
@Timmy Yes son, it sure is and I do.
@@bluecollarsportsman613 the black one only cost like $249. Right ?
@@timmy4539 www.amazon.com/Compressor-Auto-Stop-Oil-Free-Water-Oil-Separator/dp/B0BKZTPL6Q/ref=sr_1_8?crid=237ATFFOA1MC3&keywords=yong+heng+4500+psi+compressor&qid=1681310602&sprefix=yong+heng%2Caps%2C190&sr=8-8
I want the Yong Zheng but I’m waiting for you to remove its cover so we can take a peek under the hood. 👍🏼
How do I lubricate it?
You don't. Both of these are maintenance free.
Hi i have trouble with mine went i star up the temperature star at 70 degrees and can get it down
@Erick Sanches Is this after you have been running it? If so, just run the fans without turning on the pump until it cools down.
@@bluecollarsportsman613 i try that and didn't work it started after ah fay after use i plug the compressor and turn on fan after ah few moments I turn on pump and it goes to,70 oven if is not connected to rifle
@@ericksanches7540 Sounds like you may have a bad temperature gauge.
@@bluecollarsportsman613 can I change that ?
@@ericksanches7540 The only thing I can suggest is reach out to Vevor, they usally respond pretty fast. Tell them what's going on and they should send the piece you need, may even give you a little money back if you install instead of shipping it back to them.
Anyone know what the Vevor E2 error means?
@Rick Razz Can't say I've seen that one.
6 month timer has gone off.... review?
@ASEKen there is an updated review. Both are doing great. The Vevor is about 9 mos old now but I'm giving the win to the Yong Heng simply because of noise and warranty. If you happen to need 5000 psi though, then the Vevor is your choice.
Where do you read the Vevor is rated for 5000psi? I thought this thing would do 4500. @@bluecollarsportsman613
Dear Lord that thing is loud. I'll just stick with the hand pump for now haha
@Super Great Airgun Reviews You should hear the Yong Heng, I think you will like it and the GX4 is the quietest compressor I ever heard.
Vacuum cleaners can be loud too, that doesn't mean i will stick to handpicking the dirt. 😂
@@Harolddespui Meh I'm not plinking away with my pcp and it's only for pest control so hand pump is fine for me
Some bedbug crawling around in the bottom left of your filming area @ 3:31
@KJ LOL I guess it could look that way, It's actually some small broken leaf that blew from under the pump and was still close enough that the fans where moving it. If that was a bed bug, it would be a fing monster bed bug. LOL, good catch though.
Just kidding about the bedbug but I would add another point in favor of the Yong Heng since the Vevor model is deploying chunks of leaves for your critical review of her. Lol 👍🏼
@@kj5905 LOL
It's just silly that vevor uses non standard threads. None of the connectors that came with my vevor were 1/8 BSP. Took them to a machinist that could not figure out what type of threads they use. What a non sense.
@jmbcorreia72 Which threads are you referring to? The threads on the bleed valve? If you are referring to the threads on the moisture trap I don't think you can blame them. I think those are third party.
My PCP gun probe doesn't have a quick connector. It has a 1/8.BSP thread that needs an adapter to plug into the vevor conector. Funny thing is that vevor comes with such an adapter but the thread is not 1/8 BSP standard, so it doesn't fit my PCP rifle probe, which is ridiculous.
@@jmbcorreia72 It won't, you have to buy that adapter separately. www.pyramydair.com/product/air-venturi-male-quick-disconnect-1-8-bspp-female-threads-steel-rated?a=3550 or www.pyramydair.com/product/quick-disconnect-male-fitting-o-ring?a=2841
@@jmbcorreia72 Also www.pyramydair.com/product/saber-tactical-extended-female-quick-disconnect-1-8-bspp-male-threads?a=9469
@@bluecollarsportsman613 yes, I ended up buying one and waiting for delivery. Thanks for the links!
Junk save your money burn it you would get more out of it than from the compressor
Complete vevor junk save your money