I worked and traveled many years at Insituform through out the USA and Canada. A simple answer to your first question is generally it's not routine to install through 90's , however in certain circumstances we have done it. Say your sewer main is shaped like the letter " L " and those are two segments with a manhole in the middle. You can pull liner through each segment to meet in the middle then connect them together with a fitting and cure with steam. Once you cut it out after it's fully cured you will have both segments lined. For the second question, small and medium CIPP liner is manufactured with resin already applied. Some large diameter liners the resin will be applied on-site due to a few factors such as weight limits on public highways ( 80,000 lbs ). Keep in mind there are many factors to consider for each individual install and the specific type of procedure used in lieu of that. Diameter , length , ground water infiltration , cure times , ect... Hope that helps answer your questions.
@@Forcefed777 just signed a job offer with them in Canada ( alberta) , could you give some feedback on company protocols (good/bad) your experience , etc. Maybe pay . I'm starting at 24.00
@@donknots7003 I worked there 2008 - 2014 and loved it. I was based in Littleton Colorado and our crew was invited to Canada for 2 years in 2011-2012 in Calgary and Edmonton. We were 6 guys of 3700 employees selected. To this day it remains one of my fondest years of my career and I'm still involved with infrastructure today. They helped me get my CDL A and hazmat. I learned alot about myself in my years with them how much I was capable of when I knew very little when I first started. I worked all over the US as well. It was like a big adventure seeing so many great places and I'm still great friends today with my coworkers from those days. My best advice is if you can embrace the opportunity to learn alot and enjoy being able to work in all kinds of places you will love it. I have even thought about coming back to work for them as I'm in Texas now. I have so many stories from those years it was one of the best times of my life.
@@Forcefed777 thanks a ton for the feedback! I'm really excited to start , I'm going into it completely green. Cheers and best of luck in the future. 🍻
@@donknots7003 Just don't over think it. It's the same process every time and the fun part is learning all the little tricks we come up with. Always follow " The BIG 5 " Confined Space equipment. 1) Tri-pod & Wenches fall arrest 2) Air monitor for sewer gas h2s , LEL , o2 3) Harness. 4) Fresh air blower 5) Fill out a confined space permit! Safety is number #1 and look out for each other. Don't be afraid to offer a hand to help out the TV operator get the camera going , keeping all the tools neat , help the Boiler Operator set up hoses ect... and you'll learn everything so quick. Not all installs are perfect situation , some are super easy and you get the pain in the ass ones too haha but take the good with the bad but 90% are great and easy. Many of the guys you will work with and get to know have worked there for years. Because once you get over the learning part , people settle there for the career because it's a good company and they will take care of you in the long run.
Muy buen trabajo k asen son muy fregones felicidades
What size of pipe was this? Sanitary or storm sewer?
So they just drop it in?
No boiling water or pressurized steam?
This particular project was installed by inversion and cured using steam.
Can it navigate through 90s? And does the tube come with resin already inside the tube or do they inject it with resin on site?
I worked and traveled many years at Insituform through out the USA and Canada. A simple answer to your first question is generally it's not routine to install through 90's , however in certain circumstances we have done it.
Say your sewer main is shaped like the letter " L " and those are two segments with a manhole in the middle. You can pull liner through each segment to meet in the middle then connect them together with a fitting and cure with steam. Once you cut it out after it's fully cured you will have both segments lined.
For the second question, small and medium CIPP liner is manufactured with resin already applied. Some large diameter liners the resin will be applied on-site due to a few factors such as weight limits on public highways ( 80,000 lbs ).
Keep in mind there are many factors to consider for each individual install and the specific type of procedure used in lieu of that. Diameter , length , ground water infiltration , cure times , ect... Hope that helps answer your questions.
@@Forcefed777 just signed a job offer with them in Canada ( alberta) , could you give some feedback on company protocols (good/bad) your experience , etc. Maybe pay . I'm starting at 24.00
@@donknots7003 I worked there 2008 - 2014 and loved it. I was based in Littleton Colorado and our crew was invited to Canada for 2 years in 2011-2012 in Calgary and Edmonton. We were 6 guys of 3700 employees selected. To this day it remains one of my fondest years of my career and I'm still involved with infrastructure today. They helped me get my CDL A and hazmat. I learned alot about myself in my years with them how much I was capable of when I knew very little when I first started. I worked all over the US as well. It was like a big adventure seeing so many great places and I'm still great friends today with my coworkers from those days. My best advice is if you can embrace the opportunity to learn alot and enjoy being able to work in all kinds of places you will love it. I have even thought about coming back to work for them as I'm in Texas now. I have so many stories from those years it was one of the best times of my life.
@@Forcefed777 thanks a ton for the feedback! I'm really excited to start , I'm going into it completely green.
Cheers and best of luck in the future. 🍻
@@donknots7003 Just don't over think it. It's the same process every time and the fun part is learning all the little tricks we come up with.
Always follow " The BIG 5 " Confined Space equipment.
1) Tri-pod & Wenches fall arrest
2) Air monitor for sewer gas h2s , LEL , o2
3) Harness.
4) Fresh air blower
5) Fill out a confined space permit!
Safety is number #1 and look out for each other.
Don't be afraid to offer a hand to help out the TV operator get the camera going , keeping all the tools neat , help the Boiler Operator set up hoses ect... and you'll learn everything so quick.
Not all installs are perfect situation , some are super easy and you get the pain in the ass ones too haha but take the good with the bad but 90% are great and easy.
Many of the guys you will work with and get to know have worked there for years. Because once you get over the learning part , people settle there for the career because it's a good company and they will take care of you in the long run.