How to Refill Ricoh Laser Printer |Toner Refill SP C250DN | Reset Toner Chips | Arduino Hack
ฝัง
- เผยแพร่เมื่อ 2 ส.ค. 2024
- Ricoh Color Toner Refill for Ricoh SP C250DN SP C250SF Toner 407539, 407540, 407541, 407542
amzn.to/3LgjLhz
ebay.to/3wlOMwc OR ebay.to/3wnVv93
If you’re ordering these parts and need Amazon Prime, there’s a 30-Day Free Trial: amzn.to/3g2GFwI
Chip Reset App from DIY Tinker TH-cam • How to hack Ricoh Afic...
Arduino Board on Amazon - ELEGOO UNO R3 Board ATmega328P ATMEGA16U2
amzn.to/38rrWVS
ebay.to/3qXZkM9
Arduino Software Download: www.arduino.cc/en/software
DIY Tinker's Code: drive.google.com/drive/folder...
----------
Support the Patreon: / tunerwithkids
Merch Available: teespring.com/stores/tuner-wi...
Follow Me on IG: / tuner_with_kids
For questions and inquiries: tunerwithkids@gmail.com
-------------------------
#lasertoner #tonerrefill #ricohlasertoner
0:00 Intro
0:50 Amazon Toner Kit
2:00 Prep and Protect Drum
2:30 Disassemble End of Cartridge
3:30 Remove Plug and Fill
4:35 Align Pins and Reinstall End
5:40 Timelapse Other Cartridges
6:00 Reset Chips with Arduino Programmer
7:30 Programming Code for Reset
8:45 Install Cartridges, Check Levels and Test Print
Disclaimer: "Tuner with Kids", the alias for the human content creator for this TH-cam channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used. - วิทยาศาสตร์และเทคโนโลยี
Great video. The additional editing and chapter markings are great. Well done!
Thanks for the video! Today was the first time I had to replace my C261SFNFw's black toner and your video really helped a lot.
This tutorial helps a lot !
And saves a LOT of money! This video is a real gem.
very cool on the Arduino part!
Thanks, great video! We have the same printer AND the same cordless Drill! probably got the same deal on both as well. cheers!
Great information! Programmed my chips successfully - thanks!
5:32 Make sure your vacuum cleaner has a HEPA filter, as the toner particles are small enough to pass through a normal dust filter and get exhausted back into your room. Breathing in plastic particles isn’t good for you.
Yea I learned hard way. That shot color dust all over my floor. I had to put a wet towel on exhaust to catch it after the first cartridge.
Top notch content. Thanks!
A couple of easy housekeeping items.
First, make sure the vacuum is plugged in & within reach using only one hand. Almost had a huge mess on my hands because I forgot to plug it in.
Second, do cover the part he tells you to cover. I didn't and almost made a huge mess trying to be careful & almost dropped it. It's worth it to keep the unit covered.
Third, buy the 'single' use toner refill-kit as he did. Mine was enough for two refills so I didn't snip the tip as he did, and when there is a 'poof' of air because you're squeezing it to make it go through that tiny hole faster, it makes a huge mess.
I had purchased the new chips a long time ago, but that chip reset tool looks super easy and would pay for itself after the first use.
PS - thanks for the comment on having to align the unit before putting the top back on. The same thing happened to me, and it made a big difference knowing exactly what to do!
Thank again :-)
One thing with the vacuum, filter the exhaust with a towel or old shirt. It sends toner out, I had to wipe the floor and chairs that were behind me.
merci pour cette video. est ce la meme methode pour la Ricoh ps c 320?
does this work on ricoh sp c242sf toner chips?
Cám ơn anh!
Thanks for this video. I have the same printer and the toner is costly. Are those refills original or what they call compatible?
Rup Dog these are aftermarket refills. Printer companies are really ink and toner companies so they want you to spend $200 on a set of new cartridges not refill. That’s why I had to reset the chips.
Thanks for a very good video. I bought a refill set that came with chips. I found that when I went to refill, I had to dump out a lot of toner that was remaining in the cartridge. I see that you didn’t do that. Was your cartridge totally empty before you refilled?
It always has toner in it. I usually reset mine twice before I refill since the chips count pages not actually toner used.
Hello sir. Can you use it to reset toners for other Ricoh printers like Ricoh sp5200 and others
Not sure.
Tried this and it resulted in a mess! First of the plier is a bad idea since it break the cap, better to use something else and not break it, since otherwise you can dump the whole thing. The second issue I got is when I tried to put the parts together, very difficult and may result in damaging. After several tries I managed to close it and started printing, got half page cyan! (yes I was replacing cyan). Dismantled it again a saw a spill of toner which ended on the drum roller. Not sure what to do now, if I can clean it or it's to just dump it in the bin.
thank you for this video. is this the same for the Ricoh ps c 320?
The C320 uses a different model number toner. The process of filling is same but the chip reset using reset tool might different. The kits aren’t as widely available as the c250DN.
The only ones I saw on Amazon are up in the $70 range but comes with chips. amzn.to/2Co8Ncf
@@TunerwithKids
yet I see on your video that the turners are identical
@@TunerwithKids Ricoh aficio sp c320 dn
Mine just cant read or write... im using arduino mega 2560... do you know why? On serial monitor can't read, its all 0.
If my cartridge is bleeding toner after using it for a bit does this mean the cartridge needs to be completely replaced or can it be fixed?
Probably. The roller and drum on these aren’t great. They are good for one, maybe two refills before they fail.
Thank You Very Much , i have the black ink indicator giving me 90% but dose not print black
I have been resetting mine to use every last drop of toner. I’m on my third reset 😂😂😂. Probably need to refill after this though.
Is the Arduino pretty easy to setup and use? Coming from someone with no programming knowledge at all…and using a MacBook. Unsure if I want to try that or replace the chips. Thanks.
Need Pc I think.
Isn’t it easier to buy ones that came with the chips, so you don’t have to reset it? Or is this way better?
Just depends on your technical level. Some might opt for the $10 in chips. If you have the skill set for the Ardiuno programming, then that’s better. I reset mine twice before refill because the printer goes stupid because the chip says it’s empty based on pages printed but the cartridge still has plenty of toner.
@@TunerwithKids ah ok, I’ll do that then, is everything listed in your description box?
Yea the programmer is listed there. The source code is linked to DIYTinkers video, I think. Just need to make your own wire harness and pin contactor.
is it necessary to empty the toner? cant you just fill up with replacement toner?
No need to empty it unless you want a mess. Just fill it.
Thank you so much but do i have reset?
Yes. Printer will freak out and keep warning and not work.
I have exact printer model u have in this video - Ricoh SP 250dn. I downloaded the code (“I2Cv2.ino” in the link you provided ). I assume thats the file and you change the numbers one at a time to reflect the desired color and compile the code?
I think there are instructions in the notes for the program. I also linked to a video by DIY Tinker on how to use the Arduino and the program.
Tuner with Kids Thanks I see. 80-83 from Yellow, Magenta, Cyan, Black. So each run of the code we just change that number at the top of the code to reset the respective counter.
As a side note, I didn’t realize the chip is the level indicator or what stops the printer. And that we may physically have a lot left despite it saying we are low. Capitalism..
Correct, I would reset next time it says “low toner” before refilling again. Just to get the last drop out of the cartridges.
For anyone who is a complete noob to arduino and starting from scratch or no prior experience I hope you benefit from this commentary. I'm impatient and I wanted everything physically come and then deal with hassles later. I successfully updated the microchip.
In addition to the "Elegoo Uno R3" or other arduino clones you could buy (that comes with USB cable), you will need some wires to connect the board to your cartridge microchip. I bought "DEYUE Jumper Wires Set - 240 pcs" for $6 from amazon and whats nice about it is that they come as batches of 40 wires that are glued or stuck to each other on a flat plane. So you can just rip out 4 of them as a group and not worry about holding 4 separate wires in order but rather in order as left to right and or right to left. It will help when you make contact with the microchip and narrow your choices to 2 rather than 24 (or 4*3*2*1). You ONLY need male-to-male so if you can find just that for cheap that's all you need. This set contains male-to-female and female-to-female in the batch so consider those bonus for other projects. I am confirming this is adequate for anyone without wires just sitting around.
For the noobs (like me), software can be found at URL for "arduino.cc" and navigate to "software" then "download". Or www.arduino.cc/en/Main/Software. Once you download that software, as of August 2020, the version is 1.8.13. To initiate the software (and after connecting your board via USB to Windows 10 PC), click Tools --> Port --> Whatever option that is "Arduino Uno". Mine was "COM3 (Arduino Uno)" and I am assuming you bought an arduino Uno R3 or some clone variation. If you do NOT do this you will get a "board at null" error. Anyways then you can go to Sketch --> Upload the code but make sure the desired color value (80-83) was properly set for the cartridge you intend to reset. If the "Serial Monitor" screen doesn't automatically pop up at this point you can go to Tools --> "Serial Monitor". That should show the output screen. It should run the code once. Let it run and end. If its blank you missed something. Anyways at that point, setup your configuration (i.e. board to printer microchip and physically touch the 4 pins). If you are by yourself, one hand holds the four pins as desired and the other hand can use a pen and click on the red reset button on the board to re-run the code. The contact must be clean and press firmly so that the wires definately connect. Don't want to deal with write errors. After that, you put the cartridge back into the printer. The printer automatically resets the configuration and you will see the bar go from empty to full.
I am not the least bit an engineer so some of these concepts were foreign to me. But the configuration was simple for the board. You have 4 pins on the cartridge that goes from SCL, SDA, VCC, GND from left to right. Short for Clock, Data, Voltage, and Ground. It connects to the board to A5, A4, 5V, and GND (2nd ground to the right) respectively and yes it will literally state that on the pin receptors on the board. Don't worry, if you are confused just click on the DIY link for picture form. But that's it. Then you hold the wires in the order of SCL, SDA, VCC, GND to the chip and just make sure you don't wobble and loosen it just needs the continuous contact as it writes. The DIY video will show the orientation but as long as you see the long bar on the top left like it has a right eyebrow (you are looking straight at the cartridge as if you were talking to it) then thats the proper order left to right.
And if you were like me and watching this video first time, I was intimidated by Tuner with Kids pressing down on the board and wondering what the heck he was doing. Its a workaround for the code that automatically compiles and runs on the Arduino board *before* we can physically set up the desired configuration to the microchip (i.e. in position to write to it). And Tuner with Kids was pressing a red reset button to re-run that code at the desired time when we are ready to write to the microchip.
@@hanhang5086 thank you, this info helped me figure out what I did wrong. I had the ground and 5V wire mixed up on the chip. The ground wire was suppose to be on the far right for the chip and I got it mixed up with the 5V. No wonder when I touch the wire and chip, and then press the reset button, the writing was stuck and didn't do anything else. Also, every time you change the cartridge number, I had to upload it so it'll be fresh on the serial monitor. I wish he recorded doing all 4 so it would make more sense and easier to follow. I had to trouble shoot these issues myself after being confused on why my reset didn't work.
Thanks again!
After a few weeks of refilling my catridge had horizontal lines when printing. Any advice?
Usually the lines means drum roller is end of life. Need new cartridge at that point. I had that on two of my colors after my refills got used up.
@@TunerwithKids But My printer and catridge are just 2 months old. So the average lifespan of catridge will last for about a month?
You said you refilled it so you finished a cartridge in 2 months?
@@TunerwithKids Yeah
Well the drums and cartridges are rated by number of pages printed, not time. So obviously you must of printed thousands of pages and eventually they wear the drum out.
How much for the toner to refill for each colors? 100 grams each?
Look at the links in description, I have links to the toner I used.
@@TunerwithKids Found it. 90 grams for each colors. Thanks
i did this on my aficio ricoh sp 240 dn an now the printer says that it is the inccorect toner cardridge .... What can i do?
Did you replace or reset the chips?
@@TunerwithKids i got it already with the other code from the comments, i have an c240 dn printer
thanks!
@@ripper22l Hello, did you succeed to reset the chip with this video. I have the save printer as you and I'd like to know how. I tried and have the same error as you.
Thanks for help.
Toner brand?
I got Amazon refill see links in description box.