@@STMODELCARS really good model, it’s just a shame that the rear doors are loose !The front doors feel solid idk what happened there! Thanks for the help
On the older Norev the wheels will pull out. On the newer one like this CLE, front wheels are screwed to the spindle (see 3:30). You cannot pull the wheel out without removing the screw that holds the wheel to the spindle. This is constructed differently than older Norev cars. I tried at first pulling the wheel straight out and figured it I couldn’t. I didn’t remove the wheels completely in this video since I had some shims installed to fix some ‘lazy camber’ issue.
@@c41rnxhas to be disassembled. Unfortunately this is different than older Norev where you can just pull the wheels out (press fit). The screw that holds the wheel to the spindle is accessible from the backside.
Thanks Stef!!! CHEERS!
You’re welcome !
My Norev F90 M5 has one of its rear doors loose , any idea on how to fix that?
Funny you mentioned that… I also have the Norev F90 M5 and the rear door was loose as well!! I ended up just glueing the rear door shut.
@@STMODELCARS It’s a common trait for these models then 😅.
So there’s no fix for it? Is glueing the only way .
I’m not sure if there is a way to fix it, but I just didn’t feel like doing much work on it hence I glued it.
@@STMODELCARS really good model, it’s just a shame that the rear doors are loose !The front doors feel solid idk what happened there! Thanks for the help
Simply pull the wheel to remove it. You don't need to unscrew anything.
On the older Norev the wheels will pull out. On the newer one like this CLE, front wheels are screwed to the spindle (see 3:30). You cannot pull the wheel out without removing the screw that holds the wheel to the spindle. This is constructed differently than older Norev cars.
I tried at first pulling the wheel straight out and figured it I couldn’t.
I didn’t remove the wheels completely in this video since I had some shims installed to fix some ‘lazy camber’ issue.
Does this need it to be disassembled or can it be done when assembled?
@@c41rnxhas to be disassembled. Unfortunately this is different than older Norev where you can just pull the wheels out (press fit). The screw that holds the wheel to the spindle is accessible from the backside.