In your video you said guide number 3 needed some adjustment. What exactly do you look for? Can you post a video on a rod with all proper guide spacing and one with guides that need some adjustment. Go into detail on what to look for. Thanks. I did enjoy the video.
I really like you load testing for optimum guide spacing. Two questions: how do you determine placement of the first guide from the reel seat, and can you suggest a rule of thumb for how much weight to load a rod for guide placement for heavy gaster acting blanks?
Very good info. TY Have you ever used Braid to wrap guides? 30 lbs Kast King braid has no coating and sucks up liquid epoxy like white bread and is the same size diameter as size D rod guide thread is it a good idea or a dumb idea?
Thanks for watching. I can’t say we’ve ever used braid to wrap guides, but I’m sure it would work just fine. Only issue that crosses my mind would be around cosmetics. Try it out and let us know!
You have to show how the line is going symmetrically between each guide to be OK. Use the fly line to get contrast on your video at close distance for us to see it!
I like the idea, but wondering how well the rubber bands hold when building a casting rod? I've had to use guide adhesive and tape together to keep the guides from rolling over during static testing.
I use the same method for attaching the guides but instead of using rubber bands I use either Paxcoo 0.8mm Elastic String or Crystal Tec 0.6, it's used for making bracelets etc. , about $6 for 100M
![[Live] : ONE 169 วันนี้!! "อนาโตลี vs อูมาร์"](http://i.ytimg.com/vi/IK3YZVWuFJg/mqdefault.jpg)
![ค้างคืนโรงเก็บกระสวยอวกาศร้างกลางทะเลทราย [Around The World Ep. 3]](http://i.ytimg.com/vi/E5bWZQhABJE/mqdefault.jpg)
I'm so glad to find your channel and videos. I'm getting ready to build my first rod. This is great advice. Thank you!
In your video you said guide number 3 needed some adjustment. What exactly do you look for? Can you post a video on a rod with all proper guide spacing and one with guides that need some adjustment. Go into detail on what to look for. Thanks. I did enjoy the video.
I really like you load testing for optimum guide spacing. Two questions: how do you determine placement of the first guide from the reel seat, and can you suggest a rule of thumb for how much weight to load a rod for guide placement for heavy gaster acting blanks?
Close ups will be great . But the videos are awesome, keep them coming. Looking forward to some thread how to
Just finished recording a “part 2” where we show details on how to wrap with rubber bands
Posted a new video with the close ups.
yooo I've been looking for this info for so long, thank you!
Glad we could help, let me know how it worked out for you
Old video bit that wrapping bench behind you at the end, I'm curious about it. It looks like a drying setup but I see the thread carriage.
Very good info. TY Have you ever used Braid to wrap guides? 30 lbs Kast King braid has no coating and sucks up liquid epoxy like white bread and is the same size diameter as size D rod guide thread is it a good idea or a dumb idea?
Thanks for watching. I can’t say we’ve ever used braid to wrap guides, but I’m sure it would work just fine. Only issue that crosses my mind would be around cosmetics. Try it out and let us know!
awesome!
You have to show how the line is going symmetrically between each guide to be OK. Use the fly line to get contrast on your video at close distance for us to see it!
I like the idea, but wondering how well the rubber bands hold when building a casting rod? I've had to use guide adhesive and tape together to keep the guides from rolling over during static testing.
We actually static test casting rods in a similar manner
Yes, a close up of how to tie the rubber bands would be helpful~
Turner Reaney I’m working on part 2 to cover this and other questions folks have
It’ll be out tomorrow at latest
Posted a new video with the close ups.
Palo Fishing thank you!!!
Gabe Harris thanks Gabe, glad to help
Do you do a casting test
Where did you buy your fiberglass blank?
Profesionall
I use the same method for attaching the guides but instead of using rubber bands I use either Paxcoo 0.8mm Elastic String or Crystal Tec 0.6, it's used for making bracelets etc. , about $6 for 100M
What song is that in the intro ?
Do u have a close up of how to tie the rubber band
I’ll make a quick video on how to put them on
Posted a new video with the close ups.