Nice setup. I’m looking at that same chassis but trying to do some research to make sure I can transfer everything over from my 313mm wheelbase honcho scx 10 clone chassis. The width on my chassis is 68mm. About how wide is this chassis you have here? I’m wanting to transfers my bumper mounts, battery mount to a new set of chassis but I gotta have LCG chassis so I can fit my Jeep Wrangler tube body. I also have a pretty good size battery. It’s a zeees 5200mah 80c 11.1v lipo. If you got any suggestions on what I might need please I’m all ears.
Front top links are 83mm, front bottom links are 100mm high clearance. Rear top links are 121mm, rear bottom links are 127mm high clearance. All from Team Associated/Element.
What did you set for overdrive in the Stealth Trans? And what's the WB? I bet it would like having the rear axle pushed back to around 13.0" WB. Chassis is very different than the Injora that's around the same price. Great video. Hope to see you this weekend.
11% in the transmission. It's 12.3 but plan to stretch it a little. I've had the chassis about 4-5 months now, before too much was out about the injora one. I probably should have went with that one.
@@NTX_RC My Injora build is 12.87" WB. But I have straight front axle with 10% under drive and portal rear with rear steer. Should be around 40% front overdrive as is. Still in progress as many parts are not common.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
Purchase here
amzn.to/3XG3oRD
Very cool and beautiful crawler my friend!)🤩💥💯👍💪✨💫🌟
Thanks!
Great Build! Very Naice Crawler! Cool Review! THK's for the Share!
Thanks for watching!
@@NTX_RC You're welcome my Friend!
where did you buy your servo mount (SOA - Servo On Axle)?
@@leomarloedicang419 Spare Time Hobbies
Nice setup. I’m looking at that same chassis but trying to do some research to make sure I can transfer everything over from my 313mm wheelbase honcho scx 10 clone chassis. The width on my chassis is 68mm. About how wide is this chassis you have here? I’m wanting to transfers my bumper mounts, battery mount to a new set of chassis but I gotta have LCG chassis so I can fit my Jeep Wrangler tube body. I also have a pretty good size battery. It’s a zeees 5200mah 80c 11.1v lipo. If you got any suggestions on what I might need please I’m all ears.
Either later this evening or tomorrow I will measure for you. Either way you can just pinch the ends of the chassis rails to fit your bumper mounts.
I think I just need smaller battery. I have 2 5200mah 80c ZEES I should have gotten the shorties.
@Webb4RC that's gigantic, I usually use either 1500 or 2200 shorty packs.
The flexibility and crawl ability is off the charts, I wouldn’t have thought those tires would have gripped so well
Supposedly these are some of the best tires there and they are banned from Crawler competitions. They been doing great so far.
What are the link lengths for front a d rear? Having issues with all the links I've tried to use.
Front top links are 83mm, front bottom links are 100mm high clearance. Rear top links are 121mm, rear bottom links are 127mm high clearance. All from Team Associated/Element.
Pretty sure an axial 12.8"/324mm wheelbase high clearance link set from Amazon will be the same thing.
What did you set for overdrive in the Stealth Trans? And what's the WB? I bet it would like having the rear axle pushed back to around 13.0" WB. Chassis is very different than the Injora that's around the same price. Great video. Hope to see you this weekend.
11% in the transmission. It's 12.3 but plan to stretch it a little. I've had the chassis about 4-5 months now, before too much was out about the injora one. I probably should have went with that one.
@@NTX_RC My Injora build is 12.87" WB. But I have straight front axle with 10% under drive and portal rear with rear steer. Should be around 40% front overdrive as is. Still in progress as many parts are not common.
@@johnbentley2926 what axles did you go with?
@@NTX_RC SSD Diamond front axle with diff flip and TRX4 front portal in the rear.
@@johnbentley2926 Does the Injora kit come with plastic or aluminum skid/sliders?
Looks very nice so many chassi!
Thanks!
What battery tray is that
@ragercjeep7760 just a piece of aluminum and some L-brackets
@@NTX_RC thanks man
@@RAGERCJEEP np
What brass wheel weights are you running?
Hold on let me get you a link
These
amzn.to/3ZNyTdM
And these
amzn.to/3mBVgog
Ok that’s what I was thinking a two part set up. Your running the 18mm wide?
One more question. Where did you get the 83mm drag link because I will need it.
TPBs! Bubbles!
Decent
Fimonda cheese
Fimonda from down unda