Awesome!! I put my Hook2 7 to use on the hardtop this winter. Got a tourney this weekend and chasing big cats thru the ice in the weeks to come!! Love the versatility of Lowrance!!
Can you guys at Lowrance do another video for kayak setup? I just picked up HDS Live 7 for my 2019 Hobie and I’m sure the rest of the kayak community would appreciate a walk through regarding these new units, just saying. 😬
Very helpful videos. I have a question perhaps you have done it but...... I have installed a fuel transducer on my lowrance live and have been able to setup tank information but can not setup economy. I have found the units and set them to km/l but can not find economy anywhere to add as an overlay. Any help would be appreciated.
How do you set the TimeZone? I thought it would just “eventually” get it right. Been just about a year now and I’ve taken this thing through a dozen tz’s...where the time on my unit was always a source of laughter and ridicule.
Hi The bell Icon is alerting you to the fact that an alarm has been triggered. You can turn alarms on or off by going to your home page (Top left button) on the left hand side f the home page is a list of additional pages. Select Alarms. slect settings and you can either turn off the alarms or change the settings of the alarms.
I don't suppose Ican pre-configure the unit from the bench top withOUT the other equipment plugged in, even though i know which units will have which transducers and temperature sensors?
Hi, You would not be able to preconfigure the system. When installed you perform an Auto Cofigure and it polls the networks to discover what is powered up and connected.
@Lowrance i have an Hds live 9 connected with NMEA 2000 to my Evinrude Etec 40HP, but it's not showing on the left side of my screen! How can I add this? Thanks!
I'm getting no depth reading anymore. I did a soft reset on my Hook2 (Tripleshot) by powering off the unit --> then holding the "-" and "+" together --> then powering on the unit again. It still didn't show no depth reading.
Hi The most common cause of this is a transducer plug that is not completely seated. The plug needs to be seated so you do not see the sealing rings at all. The link below has some photos. If that does not resolve the issue please give us a call at 1-800-628-4487 www.lowrance.com/help-and-support/?guideTitle=Hook2---No-sonar-returns-or-depth-readings&guideId=ad974d1f-9f98-4eee-8423-98a33c6e9b65
Hi Running two identical transducers can be problematic. There would be no way for the transducer to determine which transducer created the ping. The result would be false readings and or interference.
Yes, you can set up your overlays out of the water. Just remember to Stop the sonar. You may do so either from the sonar page or from the system controls. It depends on the unit you have.
![🎤 จับฉลากร้องเพลง x P’ #XXSIVK [EP.1] (2/2) เพื่อนจับได้คำไหน..ต้องร้องคำนั้น เริ่ม! 💓🎶 #MXFRUIT](http://i.ytimg.com/vi/1bJvMJXmeS4/mqdefault.jpg)
![[Re:all TREASURE] EP.6 in 방콕ㅣ🚩 쩡캠의 방콕 투어 빵 마이 와이 👍](http://i.ytimg.com/vi/uyFw-nItA_s/mqdefault.jpg)
Awesome!! I put my Hook2 7 to use on the hardtop this winter. Got a tourney this weekend and chasing big cats thru the ice in the weeks to come!! Love the versatility of Lowrance!!
We love our Lowrance units! Thanks for making the best equipment.
Awesome info Jacob !!
Can you guys at Lowrance do another video for kayak setup? I just picked up HDS Live 7 for my 2019 Hobie and I’m sure the rest of the kayak community would appreciate a walk through regarding these new units, just saying. 😬
Very helpful videos. I have a question perhaps you have done it but...... I have installed a fuel transducer on my lowrance live and have been able to setup tank information but can not setup economy. I have found the units and set them to km/l but can not find economy anywhere to add as an overlay. Any help would be appreciated.
Greetings,
So what was the Water Speed and Speed through the Water setting, and why did he choose Speed over Ground??
How do you set the TimeZone? I thought it would just “eventually” get it right. Been just about a year now and I’ve taken this thing through a dozen tz’s...where the time on my unit was always a source of laughter and ridicule.
Under the sonar tab in data sources I’m only getting depth not temperature. Still not getting a temperature reading
Nice video. Can you tell us when the Livescope will be available?
How do you split your side image and display 2D and DI in the middle?
I’ve got the hds7 and have dataoverlay on display in middle of my page , how do I move it to the side
WHY are we not able to do that on the Simrad NSS12 Evo3S??? They're essentially the same damn thing.
I have elite 9Ti's at the bow and console, networked with a Motorguide Xi5. How should the data sources be setup for the GPS?
Local settings and internal GPS and see how this works for you.
Mine keeps popping up a warning on shallow water , little red bell icon in the lower left corner on my HDS live 9” what is this
Hi
The bell Icon is alerting you to the fact that an alarm has been triggered. You can turn alarms on or off by going to your home page (Top left button) on the left hand side f the home page is a list of additional pages. Select Alarms. slect settings and you can either turn off the alarms or change the settings of the alarms.
I don't suppose Ican pre-configure the unit from the bench top withOUT the other equipment plugged in, even though i know which units will have which transducers and temperature sensors?
Hi,
You would not be able to preconfigure the system. When installed you perform an Auto Cofigure and it polls the networks to discover what is powered up and connected.
How do I add speed on ground (SOG) to the overlay
How do I make the text size bigger. Depth is small and the depth markers on fish are microscopic too…
You cannot change the size of FishID and Depths.
@@lowrance holy moly guys! I nearly have to lay down on the deck of the boat to get close enough to read them. Any pointers?
hello jacob
does this work the same way to get Engine Data on my Info Panel gauges?
thanks
Please send us a message via FB with details about your Lowrance devices and engines used.
@Lowrance i have an Hds live 9 connected with NMEA 2000 to my Evinrude Etec 40HP, but it's not showing on the left side of my screen! How can I add this? Thanks!
I'm getting no depth reading anymore. I did a soft reset on my Hook2 (Tripleshot) by powering off the unit --> then holding the "-" and "+" together --> then powering on the unit again. It still didn't show no depth reading.
Hi The most common cause of this is a transducer plug that is not completely seated. The plug needs to be seated so you do not see the sealing rings at all. The link below has some photos. If that does not resolve the issue please give us a call at 1-800-628-4487
www.lowrance.com/help-and-support/?guideTitle=Hook2---No-sonar-returns-or-depth-readings&guideId=ad974d1f-9f98-4eee-8423-98a33c6e9b65
Can I run two 3in 1 transducers at back of my boat?
Hi
Running two identical transducers can be problematic. There would be no way for the transducer to determine which transducer created the ping. The result would be false readings and or interference.
Can I do this out of the water
Yes, you can set up your overlays out of the water. Just remember to Stop the sonar. You may do so either from the sonar page or from the system controls. It depends on the unit you have.
Lowrance customer service sucks!!!
Please send us a message via FB with a description of your issue, we'd be happy to help you.