Snapped Or Broken Clutch Pedal On Your Chevrolet Spark? Repair It With X8R! Full Instruction Video
ฝัง
- เผยแพร่เมื่อ 9 ธ.ค. 2024
- Link to purchase product: x8r.co.uk/chev...
Symptoms of Fault
Clutch pedal feels “snapped”, clutch pedal not working.
The Fault
The clutch pedals are prone to snapping.
Right hand drive Chevrolet Sparks built between July 1st 2009- October 17th 2012 suffer from this black ABS plastic part snapping on the clutch pedal. The material is simply not suitable for the application. Chevrolet introduced a thin metal bracket to reinforce this plastic but it is still failing on vehicles.
The Solution
Repair your snapped pedal / prevent damage by installing X8R's superior clutch pedal part
The X8R repair part is CNC machined from billet aluminium, which is far stronger than the plastic part installed by Chevrolet. A direct replacement for the original part to save the cost of replacing the whole pedal box mechanism, which would only fail again in time.
Please beware there are 3d printed repair parts available that are printed Grey to look like a metal part.
Vehicles Affected
Please note this kit is only suitable for Chevrolet Sparks manufactured between 2009-2012 that use a clutch cable system, NOT hydraulic clutch.
Vehicle VINs affected from the recall: KL1MF4819AC125313 - KL1MF4819CC706722
Associated part numbers:
96683849 - clutch cable
95962968 - pedal unit
You Will Receive
1 x Anodised aluminium improved design part for clutch pedal
Fitting kit comprising of Nyloc nuts, penny washers, standard washers, bolts and cable retaining pin.
Supplies
You will need:
10mm deep socket & rachet
13mm deep socket, rachet & extension
Grips/pliers
Trim removal tools
Flathead screwdriver
Philip's head screwdriver
Paint pen
12mm spanner
10mm spanner
Electric drill with 8mm drillbit
Torque wrench
I repaired the clutch pedal on my Barina Spark just recently. The repair is stupidly long compared with what it could/should be. I didn't think of it until after I had done pretty much the exact process you've shown here but I have a suggestion that can change a couple hour repair into a 5 minute 1. The "central shaft" mentioned at 2:55 is a gnats whisker too long to allow the clutch pedal to be removed without removing the entire pedal box. That gnats whisker is about the same length as the arrow head style locking mechanism. Run a hacksaw or coping saw blade through the locking mechanism to remove it. After it has been shortened the pin/shaft should now be possible to move, while still under the dash, far enough for the clutch pedal to be removed. Unclip the clutch cable, repair the clutch pedal, reattach the clutch cable, slide the shortened pin back into place and screw a self tapping screw with a washer back into the place where the locking mechanism was before shortening it. I have actually seen a large cable tie used to hold the pin in place but personally I'd go with a self tapping screw and maybe a dab of loctite on it.
hi mate this one can fit to barina spark 2011?
Mine is a 2011 Barina Spark.
Получили сегодня. На вид очень качественно. Осталось поставить. Спасибо
Y'all should redesign the Corsa D glovebox lid, which always breaks at the hinges
Hi there, thank you for the suggestion. I will look into this. - Georgina, X8R Ltd
Fantastic video thanks for the help 😊
Thanks, I'd like to put this on my spark to prevent the breakage! Link doesnt seem to be in the description though..
Not quite finished manufacturing yet, will be online within the next two weeks. We'll drop you a message when available.
@@X8RLtdUK
Hi there I would like to buy your product
Link to purchase: www.ebay.co.uk/itm/326052571374
How much for clutch padel for Chevrolet Spark
Hi, please click the link in the description to be taken to the website to purchase. - Georgina, X8R Ltd
How much this extended part
Please click the link in the description to check the price and all the information
Bisa beli di mana saya dari indonesia
Hello, I want to order this product from Turkey. I wonder if it is suitable for my 2010 Model Chevrolet Spark. I want to buy
Hi, please click the link in the description to purchase. Alternatively email us on sales@x8r.co.uk with your VIN and we will let you know if our kit is compatible. - Georgina, X8R Ltd
hi this one could fit holden barina spark 2011???
Hi there, it could fit the Holdens. Please email us your VIN to sales@x8r.co.uk and we will check. - Georgina, X8R Ltd
Where can I buy it ?
It shall be on our website www.x8r.co.uk within the next couple of days.
Also need to buy one..
@@B58ASHShould be online today!
@@X8RLtdUK that would be fantastic! I’ll keep eye on website.. thanks
Link to purchase on eBay: www.ebay.co.uk/itm/326052571374
Hi, do you ship to Hungary?
Yes, we ship all over the world. You can buy via the link in the description. - Georgina, X8R Ltd
Six I Count: KL1MF48D9AC150436
Yes our kit is compatible. Please purchase via this link: x8r.co.uk/chevrolet-spark-clutch-repair.html
@@X8RLtdUK Is there shipping to Turkey?


@@barskocak4130 Hi, yes we ship worldwide. Follow the link in the description, add it to your basket and continue to checkout. All shipping options available will pop up. - Georgina, X8R Ltd