DIY Hanging Wine Bottle Pendants
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2016
- Put those old wine bottles to good use! Follow this simple tutorial to make your very own!
Like what you see? Subscribe below:
th-cam.com/channels/jfI5.html...
Follow us on Twitter for more DIY tutorials and reviews:
/ diyprojectscom
LIKE our page on Facebook for more fun videos and how-to videos:
/ diyprojects - แนวปฏิบัติและการใช้ชีวิต
These in a store in Tuscany in italy. Very expensive to buy. Easy to make. I saw they bunches about 12 together to make a chandelier.
We loved it to the core!
And that's why we are featuring this on our channel too.
Great content!
what cable do you use? all I can find has too thick endings on both sides
Does this work on all type of glass bottle? It is that accurate for all?
videography is awsome
Till How much time we have to burn it??
isn't the bottle affected by heat
What kind of knot is that
Where do you get the socket and cord unassembled to fit inside the bottle?
You can easily find it at an electrical shop
How do I hang something like this? It's a little heavy so I don't want it to fall
It looks like this video implies that you simply let it hang by it's own wire; which is not a good idea because, as you pointed out, the glass is quite heavy. This can cause the wire to rip, tear, and damage the light. I recommend re-enforcing the hang with some twine, string, rope, or other material.Wrap it around the neck of the bottle (skinny part) and tie it off, leaving two long ends for you to hang your bottle with. Make sure the string is slightly shorter in the end then the wire from where you're hanging it so you put the weight on the string not the wire.
When you run the electrical wire through the neck of the bottle, also run a wire, tied to a washer larger than the neck, to suspend the bottle and run the electrical wire through the washer.
Ikea type lamp wire is thick enough to hang most things, in fact that's how they were meant to be used, their shades are about as heavy as a bottle. Screwing a hook into the ceiling is just a matter of using the right sized hook/screwing into a stud(find with stud finder) or using a toggle bolt. It needs to be a bit heavy or the wire won't hang straight. Just google Sekond cord set or HEMMA, you may have to replace the plug or take apart the head to fit it through though.
instead acetone can we use any different material ?
Satish Khot we can use kerosene
Alcohol works as well
@@Watchman4Jesus,I would recommend not waste any :)
Anything that burns
Do you submerge the burning string in acetone or water?
Cold water, the difference in temperature helps the glass to break
Do never try to cut a bottle this was it just leaves edges, you have to score/pre ingrave your bottle and then use hot water and cold water until it separates. Oh and remove the cork or it makes a bang.
This is rubbish. We tried this same and the bottle blasted. Luckily no one was hurt.
😂 u need to practice more
This is the worst way to cut a bottle, the edge is way more jagged and will take a solid hour or more to sand/polish it down. The final products looks sloppy and amateur.
Terrible method and no real detail on how to do this properly