I have never seen a jack like that before. Splendid restoration job you did on that Swedish jack. It looks much better and it works like a charm too. Excellent work.
Fun restoration! A lot of different skills went into doing it and making it so nice in form and fiction. I don’t understand why people feel the need to “correct” someone on how they do this sort of work. This is how you wanted to do it and how far you wanted to restore/improve. Fantastic job!! Really enjoyed it.
Some don’t like it, but I like that you use filler to smooth rough surfaces. The Jack itself lets you know it’s old so making it look as new as possible is great. Very nice work. Especially with making a new hook. Well done 👍
Great job!!!!! The film is very well EDITED, but some general plans are missing. And a show of how this jack works would be useful. Greating from Poland.
I enjoyed the brazing. Many restoration amateur hacks will weld cast iron, which creates majorly _reduced_ strength in the heat-affected weld zone. Nicely done here.
Some extremely good REPAIRS/restoration👏. I believe some have a problem with the word "Restoration" because of the difference in meaning between the words.👍
He visto muchos restauradores pero creo que hay dos que no lo son es ud y el de my mechanics son artistas, en verdad da gusta ver como el detalle es lo que les importa, claro para esto hay que tener pericia, malicia, recursividad y mucha herramienta congratulations
Hello, I have taken apart many antique and rusty old stuff and never once have I had a teardown where something didn't go flying somewhere. How would I help to minimize this a little?
Everyone has their own job and must be very skilled in their work and know that being a craftsman must be in a person's blood and inherited from their grandfather and father.❤️🙏
Sarebbe interessante capire come ha fatto a realizzarle, soprattutto quella del pistone che ha un profilo molto particolare. Grazie per la gentile risposta
Newer heard them be called Knekt before. A Stövel Knekt is that thing you use to pull your bots of with. Where I live we would call that thing a Domkraft.
Estas son herramientas que cuando el que las usa lo despiden, se va de la empresa o se jubila las arinconan por que nadie sabe manejarlas bien. Y es una lastima que no sigan en servicio.
I don't know much about this jack, if you have correct information about this jack, please email me or write me in the comments section so that I can update the information, thank you very much.
@@efimkrivov Dear friend, it was imported to England from Switzerland on that date by a person named Harvey Frost. This is an antique and I couldn't find any info on this jack on google or the rest of the internet!
no way i'd trust that brazing repair to last. Strong as it may be, it'll fail again. That hook is much too weak. it's probably a fundamental problem with this design to begin with.
Gordon-Cable? Not Gordon-Keeble? I looked up Gordon-Cable but only found Gordon-Keeble which made just 100 cars from 1964 to 1967 (and had a seriously cool logo which featured a tortoise even though the Corvette-engined cars were actually fast, lol.)
Nice job. But there is something that doesn't work for me. The hook is made of cast steel and has probably undergone some kind of reinforcement. How can you weld welding steel to it??
Мне кажется что ногу шпаклевать и тем более красить это странная работа. Ведь по ней будет перемещаться механизм (зажим) и эта вся краска слезет очень быстро и начнет ржаветь, ведь этому домкрату дана вторая полноценная жизнь. А если не собирался использовать его по назначению то какой смысл был вообще реставрировать внутренний механизм для создавания давления? Ногу лучше было покрыть химическим воронением.
Apparently, he wants to translate the concept of Sweden into Swedish (Google Translate). Other languages are translated by artificial intelligence, so it is not expected.
Вот вроде все хорошо. И старинный инструмент, и интересная конструкция, и внимание к деталям, но… ЧЕРТ, НУ ПОЧЕМУ ТАКОЕ ГЛУПОЕ ИСПОЛЬЗОВАНИЕ ИМЕЮЩИХСЯ СТАНКОВ??? 1. У тебя есть токарный станок. Нахрена было зажимать деталь в сверлильный станок для чистки? 2. У тебя есть пескоструй. Для чего ты половину деталей чухал щеткой, а штангу и вовсе засунул в токарный и чистил болгаркой? 3. Ну и вишенка, конечно, это сварка чугуна с говнилином ЭЛЕКТРОДОМ. С последующей нудной зачисткой напильником. Не, я сам так иногда делаю. Но. А) В неответственных местах, Б) болгаркой (ибо мое время дорого). Деталь надо было изготавливать заново ЦЕЛИКОМ, ибо сварка на чугуне работает плохо (лопается).
Все детали совершенно правильные, но та деталь не чугунная, а железная, и сварной шов, который был на ней ранее сделан, - чугунный. Кроме того, у меня нет токарного станка или пескоструйного аппарата, у меня есть такие хорошие друзья, как вы, от которых я получаю помощь. Спасибо❤🙏
@@HowToRestoration тогда, уж коли вы занимаетесь реставрацией старинного инструмента, пескоструй - первое, приобретением чего стоило бы озаботиться. Чтобы по друзьям не бегать.
I myself am sensitive about this issue and I never want to destroy the originality of the product. The purpose of the filler is to make the piece look a little cleaner.
If you enjoyed the video, please like and subscribe to the channel for more videos. Thank you for your constant support❤️❤️
😊😊😊😊😊😊😊😊😊😊😊😊
It said on the sticker Gordon Cable, the car was Gordon Keeble. It was a hand built upmarket car with an American V8, a grand tourer.
I have never seen a jack like that before. Splendid restoration job you did on that Swedish jack. It looks much better and it works like a charm too. Excellent work.
Your support means the world❤️🙏
Fun restoration! A lot of different skills went into doing it and making it so nice in form and fiction.
I don’t understand why people feel the need to “correct” someone on how they do this sort of work. This is how you wanted to do it and how far you wanted to restore/improve.
Fantastic job!! Really enjoyed it.
Yes, that's right, thank you for your understanding
Excellent work
Your support means the world❤️🙏
سلام و درود
من هم تازه وارد این عرصه شدم
خوشحالم که میبینم موفق شدی من از هشت ماه پیش پیگیرت بودم ❤❤❤❤
@@kiarestoration.90 بسیار عالی .
امیدوارم در تمام مراحل زندگی خود موفق باشید .
راز این است / سخت بکوشید .
انشالله موفق خواهید شد .❤️😉
Some don’t like it, but I like that you use filler to smooth rough surfaces. The Jack itself lets you know it’s old so making it look as new as possible is great. Very nice work. Especially with making a new hook. Well done 👍
Your support means the world❤️🙏
Интересно смотреть, как предметы получают вторую жизнь, браво!!!
🙏❤️
Bom dia. Meus parabéns você é diferenciada que Deus abençoe sempre sua vida e sua profissão.
Thank you brother, God bless you and your family. Thank you very much🙏❤️
Great job!!!!! The film is very well EDITED, but some general plans are missing. And a show of how this jack works would be useful. Greating from Poland.
That’s so kind of you🙏🙏
I enjoyed the brazing. Many restoration amateur hacks will weld cast iron, which creates majorly _reduced_ strength in the heat-affected weld zone. Nicely done here.
👌👏
cool jack and nice work.. I would never use it with a painted lift rod.
Me neither
Excelente trabajo, mucha dedicación y precisión. Felicitaciones!
Your support means the world❤️🙏
Beautiful restoration. I love it. ~Kevin
Thank you very much!❤️
6:17 Zatuhlý řetěz nejlépe vyčistíš ponořením do nafty, nebo do petroleje. Pěkná renovace zvedáku. Pavel 🇨🇿
🙏👍
*Outstanding Video:* Good camera work and editing. The close-ups really stand out nicely.
Thank you very much!
Some extremely good REPAIRS/restoration👏. I believe some have a problem with the word "Restoration" because of the difference in meaning between the words.👍
Great point!
He visto muchos restauradores pero creo que hay dos que no lo son es ud y el de my mechanics son artistas, en verdad da gusta ver como el detalle es lo que les importa, claro para esto hay que tener pericia, malicia, recursividad y mucha herramienta congratulations
Thanks, buddy. I also like and support @mymechanics channel. He is a good craftsman.
Thanks for watching 😃❤️
Such a great restoration 👍👍
Thanks bro
Сам люблю что нибудь реставрировать, интиресный процесс увлекает и люблю наблюдать . Всем удачи и интересных роликов.
Your support means the world❤️🙏
Перфектна работа. Браво.
That’s so kind of you🙏🙏
Fantastic restoration
Many thanks!
good job
I’m so grateful❤️🙏
Tuve un gato de esos para mi Wagonner, EXCELENTE!!
Thank you! ❤️😉
Sehr gute Arbeit. Ich finde löten oder verzinnen besser als Spachtelmasse. Aber egal, toll gemacht. ❤🤠🤘
Danke lieber Freund
I very much enjoyed your video and I gave it a Thumbs Up
🙏❤️
I have one that is fully funktionel in my shop,nice to see that im not alone,😀
😁👬
What is it made for ???
chassis
Trabajo bien hecho. !!!!!!!!!
❤️🙏
,Да в народе говорят: у вас руки на месте, Молодец!
Your support means the world❤️🙏
...Du machts echt perfekte sache in sachen restauration mit viel Liebe und besser wie Neu....👍👍👍
Das ist so nett von dir🙏🙏
Cavolo è meglio del originale! Bravo.
I appreciate it 😁
Watching the fresh weld shrink at 9:06 is really interesting.
I hadn't noticed myself, now I see😁
Мастер ты красавчик 👍
Если вы имеете в виду мой тип и одежду, я должен сказать нет, это противоположно тому, что вы думаете, и моя рабочая одежда маслянистая.😁😁🤷🏻♂️
@@HowToRestoration я имел ввиду то, что вы делаете своими руками.
That is a masterpiece, great restoration, viewer from trinidad
Thanks so much
Hello, I have taken apart many antique and rusty old stuff and never once have I had a teardown where something didn't go flying somewhere. How would I help to minimize this a little?
I did not understand your question
@@HowToRestoration sorry about that. I was wondering how you knew where everything was. Springs bearings. I would have lost one.
Everyone has their own job and must be very skilled in their work and know that being a craftsman must be in a person's blood and inherited from their grandfather and father.❤️🙏
Great restoration
I appreciate it❤️🙏
Hortlot bei Guss, Stahlblech kann man auch mit Acetylen/Sauerstoff schweißen, braucht eine sehr kleine Spitze.
That’s so kind of you🙏🙏
Bravissimo ma ti faccio una domanda. Dove hai trovato le parti in gomma? Credo sia stata la cosa più difficile.
I left the rubber parts and packaging to my friend and he did it for me.
Sarebbe interessante capire come ha fatto a realizzarle, soprattutto quella del pistone che ha un profilo molto particolare. Grazie per la gentile risposta
Molto bello! 👍 cosa usi per annerire il gancio?
Super blue
❤
That’s so kind of you😘❤️
"If it's Swedish, it's still broken." - Finland 😂
It's not, this jack is great
@@HowToRestoration it's a Finnish joke, dont worry about it
@joshthecomputertech I did not know that 😄
Super top
✌
Good restoration. By the way, made in Sweden. Closer to me😊. Regards Stig Österberg from Dalsbruk in Finland.
yeah 👍
Your support means the world❤️🙏
Newer heard them be called Knekt before. A Stövel Knekt is that thing you use to pull your bots of with. Where I live we would call that thing a Domkraft.
Your support means the world❤️🙏
So it's a hydraulic high lift jack for 4x4 vehicles?
Yes 👍
Nice work 👍👌
I appreciate it❤️🙏
Well done 👍
Thank you! Cheers!
Yay, green oil
so nice video
That’s so kind of you🙏🙏
Estas son herramientas que cuando el que las usa lo despiden, se va de la empresa o se jubila las arinconan por que nadie sabe manejarlas bien. Y es una lastima que no sigan en servicio.
Se coloca en la colección. 🙏🙌
0:38 0:45 0:48 no sabía que los gatos llegaban a los 100 años.
😁❤️😉
Необычный инструмент удача что он попал именно к вам 🎉
Удача, должно быть, приняла меня за кого-то другого!
Дуже гарна робота. ❤
So thanks bro❤️
Good job bro👌👌👌
Thank you so much bro
I think you mean Gordon Keeble?
I don't know much about this jack, if you have correct information about this jack, please email me or write me in the comments section so that I can update the information, thank you very much.
So nice 👍
I appreciate it❤️🙏
حرف نداری پسر 👏👏👏👏👏👏👍👍👍
That’s so kind of you🙏🙏
1966?
Yes
@@HowToRestoration but you told us it was a 100yrold jack..
@@efimkrivov Dear friend, it was imported to England from Switzerland on that date by a person named Harvey Frost.
This is an antique and I couldn't find any info on this jack on google or the rest of the internet!
The rubber handle is a dead give away this isn't that very old.
Perfect❤
🙏❤️
top;...!
❤️🙏
👍🙂👍
🙏❤️
Коммент в поддержку канала
Your support means the world❤️🙏
COMME TROP SOUVENT UNE FOIS LA RESTORATION FINIE?ON NE PAS A QUOI CELA SERT.....
Are you Persian?
Yeah bro
@@HowToRestoration that's awesome man
I saw that Iran Potk hamer 😁
You did well 👏👏
@@nature-agriculture-with-Esi 🤷🏻♂️
That’s so kind of you🙏🙏
no way i'd trust that brazing repair to last. Strong as it may be, it'll fail again. That hook is much too weak. it's probably a fundamental problem with this design to begin with.
This jack is a collectible and has its place in the collection and is not supposed to work anymore. It is now retired.
Ese gato lo traían los for y chevrolet del 70
What year exactly do you know about this jack?
Gordon-Cable? Not Gordon-Keeble? I looked up Gordon-Cable but only found Gordon-Keeble which made just 100 cars from 1964 to 1967 (and had a seriously cool logo which featured a tortoise even though the Corvette-engined cars were actually fast, lol.)
Thanks
Nice job. But there is something that doesn't work for me. The hook is made of cast steel and has probably undergone some kind of reinforcement. How can you weld welding steel to it??
This jack is not supposed to be used and should be kept in the collection because there are only 100 of them made in the world.
Мне кажется что ногу шпаклевать и тем более красить это странная работа. Ведь по ней будет перемещаться механизм (зажим) и эта вся краска слезет очень быстро и начнет ржаветь, ведь этому домкрату дана вторая полноценная жизнь. А если не собирался использовать его по назначению то какой смысл был вообще реставрировать внутренний механизм для создавания давления? Ногу лучше было покрыть химическим воронением.
Так нарисовал производитель, а этот разъем входит в комплект и его использовать нельзя.
Может пора обзавестись пескоструем???
Я скоро сделаю это сам !😁
🇸🇪🇸🇪🇸🇪🇸🇪🤗🤝😊🤓😎🤩😁😀💯❤
I appreciate it❤️🙏
👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏a real beauty!!!
That’s so kind of you🙏🙏
Question about the title: what is "svenska knekt"?
Apparently, he wants to translate the concept of Sweden into Swedish (Google Translate).
Other languages are translated by artificial intelligence, so it is not expected.
The 3500-year civilization of Persia
Bale Ma inim !😃
@@HowToRestoration❤
Шпакля это уже лишнее...
Your support means the world❤️🙏
👍🤗🙏🏻🇻🇪
❤️🙏
unpointing drill 😉
I’m so grateful❤️🙏
Зачем ?
Потому что всего их было сделано 100 штук.
「樹齢」ってどういうことだよ（笑）
Вот вроде все хорошо. И старинный инструмент, и интересная конструкция, и внимание к деталям, но… ЧЕРТ, НУ ПОЧЕМУ ТАКОЕ ГЛУПОЕ ИСПОЛЬЗОВАНИЕ ИМЕЮЩИХСЯ СТАНКОВ???
1. У тебя есть токарный станок. Нахрена было зажимать деталь в сверлильный станок для чистки?
2. У тебя есть пескоструй. Для чего ты половину деталей чухал щеткой, а штангу и вовсе засунул в токарный и чистил болгаркой?
3. Ну и вишенка, конечно, это сварка чугуна с говнилином ЭЛЕКТРОДОМ. С последующей нудной зачисткой напильником. Не, я сам так иногда делаю. Но. А) В неответственных местах, Б) болгаркой (ибо мое время дорого). Деталь надо было изготавливать заново ЦЕЛИКОМ, ибо сварка на чугуне работает плохо (лопается).
Все детали совершенно правильные, но та деталь не чугунная, а железная, и сварной шов, который был на ней ранее сделан, - чугунный.
Кроме того, у меня нет токарного станка или пескоструйного аппарата, у меня есть такие хорошие друзья, как вы, от которых я получаю помощь.
Спасибо❤🙏
@@HowToRestoration тогда, уж коли вы занимаетесь реставрацией старинного инструмента, пескоструй - первое, приобретением чего стоило бы озаботиться. Чтобы по друзьям не бегать.
@@Feanor2 Я планирую сделать песчано-бластер самостоятельно, потому что у меня в мастерской есть железные листы, и я хочу их использовать.
Good job, but slightly over restored. As a lot of TH-cam restorers do. Don’t use filler on a rough casting, takes the character away.
I myself am sensitive about this issue and I never want to destroy the originality of the product. The purpose of the filler is to make the piece look a little cleaner.
Interesting opinion, but that it is I feel it looks better.
I hate the rough casting especially rusted ones. So it's just personal opinions.
@@HowToRestorationI think you’re both wrong sand it weld it and mirror polish the heck out of that thing
I want hand tool rescue he's better
Your support means the world❤️🙏
To jack up my 100 year old horse
Your support means the world❤️🙏
Tamir senaryosu çok kötü
I’m so grateful❤️🙏
Хуэво
🤷🏻♂️❤️
Странное движение напильником при обработке округлых поверхностей)
I’m so grateful❤️🙏
Great job " and keep using the filler"!👍😉
That’s so kind of you🙏🙏