I have a problem in out vacuum tank level,, we installed an ultrasonic transmitter but it's level display is always error once the vacuum pump runs,,, we install a pipe inside the tank, after testing using manual filling of water and manual draining the reading now is ok,,, but when the vacuum pump starts to run, at first reading is ok, but during 2 days of running online, reading stuck up to high,, by the way we use pulsar ultra 3 transmitter,, can you explain to us why it goes that way the level stuck to high even we already drain to 25 percent level,,,
Hello There are many reasons behind this thing. 1. Firstly, vaccum pump creates disturbance for your pulsar. I mean it happened when there is unstable water surface because of vacum pump 2. Secondly, vibration could be the one of the reason.
![Guided Wave Radar Level Measurement - [Echo Curve Reading]](http://i.ytimg.com/vi/DDE3fkSNFw0/mqdefault.jpg)
Excellent explanation, from Brazil thanks.
Thank you...keep supporting us
Help full
Very good. Thanks 🙏
I have a problem in out vacuum tank level,, we installed an ultrasonic transmitter but it's level display is always error once the vacuum pump runs,,, we install a pipe inside the tank, after testing using manual filling of water and manual draining the reading now is ok,,, but when the vacuum pump starts to run, at first reading is ok, but during 2 days of running online, reading stuck up to high,, by the way we use pulsar ultra 3 transmitter,, can you explain to us why it goes that way the level stuck to high even we already drain to 25 percent level,,,
Hello
There are many reasons behind this thing.
1. Firstly, vaccum pump creates disturbance for your pulsar. I mean it happened when there is unstable water surface because of vacum pump
2. Secondly, vibration could be the one of the reason.
Sir radar level transmitter ke calibration kasy karty han
Hello Tanvir
I will make one video in future about this topic
@@InstrumentCalibration okay
AI generated.