You can cast with the plaster as well if the mold? Do you just break the mold after lightly to release the grill or Ora it just slide off easily after casting?
I work in engraving so I’m aware of these tools, the first one I believe is a cutting bit (for a Dremel tool), the second looks like some kind of vibration based hand held polisher but for the Dremel tool(I’m not too sure), the third one looks like a metal brush bit for the Dremel tool.
ALL THE STUFF TO GET STARTED MAKING GRILLZ *Wax Pen - (This is a cheap one to get started) www.ebay.com/itm/332690918287... *Flask Tong- (Whatever size makes sense for the size Burnout Oven and Flask you have) www.ebay.com/itm/192468022005... *Crucible- www.ebay.com/itm/200652101103 *Mapp Torch- Lowes, Menards, Home Depot… *Investment-(Use to fill up flask that has your wax pattern) www.ebay.com/itm/164712894084... *Spruce- (You need different sizes) www.ebay.com/itm/382135553023... *Burnout Oven- (Get cheap pre-owned one to start) eBay *Stainless Steel Flask- (Whatever size fits your burnout oven) www.ebay.com/itm/254187370253... *Sprue Tree Base- (Whatever size fits your flask) www.ebay.com/itm/264264602809... *Plaster-(For making the tooth mold) www.amazon.com/Ultrac.../dp/B01FMMSFCU/ref=sr_1_1... *Alcohol Burner- (You can use to heat up wax for making patterns) www.amazon.com/Annhua.../dp/B07GRZZXBV/ref=sr_1_1... *Denatured Alcohol-(For alcohol burner) www.amazon.com/Klean.../dp/B002MBX2QE/ref=sr_1_1... *Pattern Resin- usdentaldepot.com/flow-kit-inlay-pattern-resin.../ *Thowax- usdentaldepot.com/keystone-yeti-thowax-gray.../ *Isolation- usdentaldepot.com/renfert-picosep-isolation.../ *Pink wax sheet- usdentaldepot.com/besqual-pink-base-plate-wax.../ *Dental Mold- www.grillzbyjcjewelry.com/.../extra-custom-mold... *Gold- RioGrande
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.15 (1/4)](http://i.ytimg.com/vi/TLBjiHvkKtE/mqdefault.jpg)
Back at it again 🥇💯
Thank you very much!
I always thought they used a small coping saw to cut the faces open
Raw !
You can cast with the plaster as well if the mold? Do you just break the mold after lightly to release the grill or Ora it just slide off easily after casting?
Great video..What kind of die stone or investment you used before putting your model in the oven?
In this video we have used the Rema Dynamic S investment material✌🏻
How do you wax them without wax sheets, can’t figure out what wax and tools you use🙌🏼
lost wax, not one specific. Just put ur waxed in paris plaster, heat it end then u have a mold for metal
just buy some modeling wax
Thanks for sharing your videos I learn a lot
Quick question is there a one step oven process good enough to use
Why do you cast this differently , than just pulling the wax off the stone mould
One and only ❤️
Imagine finishing one of these, then when you put it on there is just that one tooth that can't fit in it 💀 I'd been wanting to break something.
I actually did and now I’m tryna go permanent because gold would be cheaper as a fix🤦🏾♂️
❤️ Please, next time add the used ingredients ❤️
How can i avoid shrinkage from
The casting?
that is what i need in my life dude
Another one ☝️ 🔥🔥
Thank you 🙏🏻
Bien super tes tuto
Dope I need to grab me some
with all your grillz you dont use wax sheets?
Are the silver or white gold
What metal you cast with?
What is the wax your using the powder
What do you use around the mold before the plaster is added is that casting tape
it's masking tape from the dental company Siladent
What are the tools you used to clean up the teeth? Do you know the names for these bits?
I work in engraving so I’m aware of these tools, the first one I believe is a cutting bit (for a Dremel tool), the second looks like some kind of vibration based hand held polisher but for the Dremel tool(I’m not too sure), the third one looks like a metal brush bit for the Dremel tool.
need that diamond dust tutorial like asap.... if anyone reading this know how to do the diamond dust pls reply.
Just basically hitting the surface over and over with a point. Like an engraver. Creating a bunch of tiny circular divots
I keep telling grillz about the diamond dust too but he just keeps says the videos coming !
GRILLZ DO THE DIAMOND DUST!!! 🙏
Buy a dremel 290
What is that tool you used to put the wax on with called??
It's a Waxlectric 2 from the Renfert dental company
theses are nice
Thank you!
@@GrillzGermany does the resin burn with the wax during burnout?
I need custom gold teeth grillz i live in merritt bc Canada
Love your work! I would love to try this craft in the US, mind sharing the tools you would need? 🙏🏽🥺
I will
ALL THE STUFF TO GET STARTED MAKING GRILLZ
*Wax Pen - (This is a cheap one to get started)
www.ebay.com/itm/332690918287...
*Flask Tong- (Whatever size makes sense for the size Burnout Oven and Flask you have)
www.ebay.com/itm/192468022005...
*Crucible-
www.ebay.com/itm/200652101103
*Mapp Torch-
Lowes, Menards, Home Depot…
*Investment-(Use to fill up flask that has your wax pattern)
www.ebay.com/itm/164712894084...
*Spruce- (You need different sizes)
www.ebay.com/itm/382135553023...
*Burnout Oven- (Get cheap pre-owned one to start)
eBay
*Stainless Steel Flask- (Whatever size fits your burnout oven)
www.ebay.com/itm/254187370253...
*Sprue Tree Base- (Whatever size fits your flask)
www.ebay.com/itm/264264602809...
*Plaster-(For making the tooth mold)
www.amazon.com/Ultrac.../dp/B01FMMSFCU/ref=sr_1_1...
*Alcohol Burner- (You can use to heat up wax for making patterns)
www.amazon.com/Annhua.../dp/B07GRZZXBV/ref=sr_1_1...
*Denatured Alcohol-(For alcohol burner)
www.amazon.com/Klean.../dp/B002MBX2QE/ref=sr_1_1...
*Pattern Resin-
usdentaldepot.com/flow-kit-inlay-pattern-resin.../
*Thowax-
usdentaldepot.com/keystone-yeti-thowax-gray.../
*Isolation-
usdentaldepot.com/renfert-picosep-isolation.../
*Pink wax sheet-
usdentaldepot.com/besqual-pink-base-plate-wax.../
*Dental Mold-
www.grillzbyjcjewelry.com/.../extra-custom-mold...
*Gold-
RioGrande
@@shannonmack6341 you’re a fuckin saint for this hoss
@@jorlama9998 thanks tons. I was sick and tired of having to refer to so many different sources, figured I would get it all in one spot.
What is that stuff he’s putting on the teeth and where can I get it?
Hast du ein website oder so wo man dich kontaktieren kann? Weil mir grilz machen lassen. Danke.
Unsere Website geht demnächst online. Dort wirst du alle Informationen finden die du benötigst ✌🏻
Hallo kann man bei dir sich Silberzähne oder Chrom machen lassen ?
liebe grüsse
What do u use for grinding / filing
Que discos uso ?
Can I get a open face grill even though I have crooked tooth?
i would go with a normal grill, depends on what you mean with crooked, hard to see without a picture but your best bet is definetly a normal grill :)
🐐
they are silver???
it's cobalt chrome✌🏻
@@GrillzGermany
And what is the price?
6:00 what kinda wheel is that?
White silicon wheel
Most abrasive
Need lovely 😍💋 💝💖❤️
Still need my refund
Such a periodontal joke.
We'll curse y'all out here too,who right? Every damn person y'all bring!!!$$$$&&&&&STILL I'm done
Ur number