Before installing the pickup, I checked the output and looked at the phase. I did not try to measure the overall output. It's good to check. I will do so in the future.
I saw this in the refinishing video too, why do you countersink the holes on the body/neck when the screw heads that require the countersinking dont make contact with the body or neck?
Huh. Not sure I understand why you went to the trouble of hollowing out dowels on lathe to press in to tuner holes. It's way easier to glue in solid dowel then re-drill appropriate size hole. Anyway. Nice editing on these videos. The lighting is great.
@@Andybassguitar I’ve seen you ‘play’ on your videos….trust me, we turn knobs while playing, and again you didn’t understand what I said… they stick out too high is all I said, and they really do, to each there own of course but, I see so many ridiculous gimmicks and impractical aesthetics. Believe me I deal with the same shit from people
Thank you for your comment. I probably understand what you are trying to say. From the point of view of ease of playing, it is also important that the knobs are easy to turn, and that they don't hit your hands when you play. The knobs in the video were added after discussing with the owner about the importance of appearance. The fact that the knob was changed soon after the owner played the guitar suggests that there must have been a problem. Or his taste has changed. As far as playability is concerned, I think there are a lot of problems even with traditional guitars. But it has become a tradition, and many users prefer it that way. It's really up to each individual to decide what's better.
That mount you fabricated for the Novak gold foil was truly inspired. Great work Andy!
Thank you Andy.... as always, it is a pleasure and honour to watch you work.
Gorgeous. Loved the sound, too.
例の旋盤クン いい相棒になってますねぇ。
いつもながらの 美しいフレットとナットは流石です！
丁寧な仕事を見られて 癒されましたわ！thank you‼
エンディング曲、素晴らしいネ！
You are a madman my friend! in a good way.
Thank you!
Good job
Wow 💥
This is a great job
カスタムのペグ交換お願いする際は今回の様なブッシュでお願いしたいですねー
正直コンバージョンブッシュの方がコストパホーマンスは高いです。
見た目が同じならそっちのほうがおすすめといえばおすすめかもしれません。この方法は浪漫はありますが。
Beautiful. What knobs are these ?
めっちゃカッケーほかに言葉が見つかりません
Did you test the switching at the output jack with an ohm meter before you finished assembling?
Before installing the pickup, I checked the output and looked at the phase.
I did not try to measure the overall output.
It's good to check. I will do so in the future.
I saw this in the refinishing video too, why do you countersink the holes on the body/neck when the screw heads that require the countersinking dont make contact with the body or neck?
ボディの塗装を皿穴可能（面取り加工）するのはネジを外す際にネジと塗料が癒着して一緒に剥がれてしまうことがあるからです。
おそらくカスタムショップ系や、手の込んだギターの場合ほとんどが面取り加工をされていると思います。
@@Andybassguitar Very interesting, i learned something today. Thankyou!
Ficou linda!
get luckyカッコいいですなぁ
Couldn't you just have mounted the gold foil directly to the top of the pickguard?
Andy do you use wood glue to set your nut? Amazing video as always!
I use a tight bond.
And super glue.
What's the product you use to hydrate de rosewood fretboard??
Homemade beeswax wax.
What paste did you run on fretboard?
Original beeswax wax.
The name of music on end of video?
I am searching the same.
Daft Punk - Get Lucky
@@CelikDogukan Daft Punk - Get Lucky
Huh. Not sure I understand why you went to the trouble of hollowing out dowels on lathe to press in to tuner holes. It's way easier to glue in solid dowel then re-drill appropriate size hole. Anyway. Nice editing on these videos. The lighting is great.
I chose this method because I thought this method would be more accurate than that method.
Thanks.
旋盤扱いが難しそうですな、、、フレットサイドに充填してるのはボンドと指板の削りカスですか？
サイドのは今回はパテを使いました。
正直パテのほうが使いやすいのでおすすめです。
コーヒーとか使う方もいらっしゃいますね。
👏🏽👏🏽👏🏽👏🏽👏🏽🎶🎸🎸🎵🥇🇧🇷🇧🇷🇧🇷
旋盤欲しいです
フラックスは何処の使ってますか？
これです。www.monotaro.com/g/01150695/
Yikes those knobs are obtrusive and ridiculous...not practical at all.
I rarely see people playing while turning the knobs these days.
It has a different knob now.
@@Andybassguitar I’ve seen you ‘play’ on your videos….trust me, we turn knobs while playing, and again you didn’t understand what I said… they stick out too high is all I said, and they really do, to each there own of course but, I see so many ridiculous gimmicks and impractical aesthetics. Believe me I deal with the same shit from people
Thank you for your comment.
I probably understand what you are trying to say.
From the point of view of ease of playing, it is also important that the knobs are easy to turn, and that they don't hit your hands when you play.
The knobs in the video were added after discussing with the owner about the importance of appearance.
The fact that the knob was changed soon after the owner played the guitar suggests that there must have been a problem. Or his taste has changed.
As far as playability is concerned, I think there are a lot of problems even with traditional guitars.
But it has become a tradition, and many users prefer it that way.
It's really up to each individual to decide what's better.