Hey Arm&Gun, i just bought the M1014 in US - the stock looks just like yours but the stock tube doesn't have the grooves near the grip like yours; it doesn' collapse all the way tot he gun. Do you know if this is a look alike and i in fact do not have a adjustable buttstock?
Yes they will. You'll need to get in touch with the Canadian Firearms Center before coming North. Every Canadian gun owner is licensed, background checked and interviewed. Essentially it's a nightmare, call first and they'll present you with a series of idiotic bureaucratic hoops to jump through. If you don't, you'll be stopped, guns seized, and charged with possession of a firearm without a valid license. Not fun.
None other than it's heavy and I didn't use the rail segments for much. It's a quality and cool looking rail, but I'm actually looking to swap it out for something simpler and lighter. Quite a few rounds through mine, no issues.
What quad rail and side saddle do you have ? Reason i ask is i have a 2021 benelli m4 and i purchased the B&T qaud rail for the benelli and a mesa side saddle for the Benelli but the side saddle will not let the B&T qaud rail to slide back all the way, but if i leave on the stock Picatinny rail the B&T qaud rail slides back perfectly. Now im stuck with this mesa side saddle that i can not use.
I can't collapse my stuck buttstock all the way toward the barrel. Im wondering if its possible the guy I bought the m4 from put the collapsible stock on top of a barrel/cylinder that's meant for the noncollapsing stock?
I bought a canuck operator which has the same dissassembly but I cant get the first pin out to remove the firing pin. Even with pressure applied to the bolt, any advice?
okay lets go: the position for the stock remove is marked exactly by Benelli with a thin line. You dont pull just the charging handle out of the bolt; you rotate it on the forcespot and take it out smoothly: if you just pull you are hurting exactly the mechanism which stops the charging handle to just fall out during shooting. And you damaged your o-ring to the side that holds the firing pin---->really not good ! Id recommend not to spray over the whole Bolt, cause this will make all kind of dirt sticking on it: just oil the slidecurves of bolt and reciever. And you should allways screw the magcap as hard as you can- it tends to open and to cause malfunctions in all forms otherwise during shooting.
Thanks Arm&Gun!
Keep fighting for your Rights up in Canada!
Bro this by far in my opinion the best m4 shotgun I’ve ever seen finally I see a different choke on it good work
Hey Arm&Gun, i just bought the M1014 in US - the stock looks just like yours but the stock tube doesn't have the grooves near the grip like yours; it doesn' collapse all the way tot he gun. Do you know if this is a look alike and i in fact do not have a adjustable buttstock?
coming from the USA through canada to Alaska do you know if Canada will have a issue if I want to take one through?
Yes they will. You'll need to get in touch with the Canadian Firearms Center before coming North. Every Canadian gun owner is licensed, background checked and interviewed. Essentially it's a nightmare, call first and they'll present you with a series of idiotic bureaucratic hoops to jump through. If you don't, you'll be stopped, guns seized, and charged with possession of a firearm without a valid license. Not fun.
Man, I want so bad that top rail/heat shield and a Supernova stock on my M4
Great vid..just installed b& t rail..any problems with yours ? How many rounds with handrail installed? Thanks in advance.
None other than it's heavy and I didn't use the rail segments for much. It's a quality and cool looking rail, but I'm actually looking to swap it out for something simpler and lighter. Quite a few rounds through mine, no issues.
Your the man
Man I don't have a choke in mine at all. The guy at basspro stated it is a m4 but a limited edition model 1014.
What are you going turkey hunting.
@@reneserna3168 yes. But I'd like to reach out more than 10 yards when shooting #7 or #8
You'd be a saint if you can make a video or provide a link that shows the installation of that B&T handguard.
Hey what kind of pick mount do you have on the shell tube it looks like it would be perfect for a flashlight 🔦
What ammo do you recommend to not have cycling issues?
Mine won't cycle with any ammo with less than 1300 ft/sec velocity.
What quad rail and side saddle do you have ? Reason i ask is i have a 2021 benelli m4 and i purchased the B&T qaud rail for the benelli and a mesa side saddle for the Benelli but the side saddle will not let the B&T qaud rail to slide back all the way, but if i leave on the stock Picatinny rail the B&T qaud rail slides back perfectly. Now im stuck with this mesa side saddle that i can not use.
why do you have to remove the stock? Can you do the rest of the stripping without taking that off?
Yes, he was just showing how to take that stock off if you had it
Couldn’t remember how to remove collapsible stock. Thanks for the help.
You should put a full length mag tube. OEM Benelli tubes are available as are after market tubes, I put a titanium tube on it was easy to do.
Where can I order the product youre talking about?
@@Erik-tc6pgbenelli parts
I thought the B&T quad rail has a set screw? If so, we didn't see you loosen the set screw before removing the quad rail. I'm confused.
where can i find the stock and hand guard?
I can't collapse my stuck buttstock all the way toward the barrel. Im wondering if its possible the guy I bought the m4 from put the collapsible stock on top of a barrel/cylinder that's meant for the noncollapsing stock?
Go over to Freedom Fighter Tactical channel. They have a video on difficult collapsing stocks. It’s a common problem.
I bought a canuck operator which has the same dissassembly but I cant get the first pin out to remove the firing pin. Even with pressure applied to the bolt, any advice?
What kind of heat shield is that?
Were can i get the grip handle you have on your benelli?
okay lets go: the position for the stock remove is marked exactly by Benelli with a thin line. You dont pull just the charging handle out of the bolt; you rotate it on the forcespot and take it out smoothly: if you just pull you are hurting exactly the mechanism which stops the charging handle to just fall out during shooting. And you damaged your o-ring to the side that holds the firing pin---->really not good ! Id recommend not to spray over the whole Bolt, cause this will make all kind of dirt sticking on it: just oil the slidecurves of bolt and reciever. And you should allways screw the magcap as hard as you can- it tends to open and to cause malfunctions in all forms otherwise during shooting.
what extended mag tube is that?
What rail is that?
B&T
Love this gun but it’s like $1,800 Canadian 😱
American too eh
2600+tax my man, I just got myself one
$1800 in 2010
@@maskirovka142 gs 2023 new no extras
интересно, в России продаётся?
This seems like a really cool shotgun however it has a ton of parts that's why I got me the Sentry 12 it only has about four parts
This is a semi-auto gas-operated shotgun, not a shitty pump-action shotgun like a sentry 12
Who is here because of John Wick?
Insufficient takedown.
What about the ARGOI system? Cleaning without doing that is just wrong!