Press for Sneaker and Shoe with Cap-Sole Repair and Manufacture PSN-19

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • This press is intended for the repair and production of sneakers, shoes and boots with bowl-shaped soles from 6 to 16 men's sizes. During pressing its diaphragm simultaneously pushes against and the bottom of the sole as well as the part that surrounds the upper of the shoe. The clamping force is adjustable and can be up to 15 psi.
    The press сonsists from the base, the air unit and the rack with a movable prop on it. On the base are located (from left to right): a pressure gauge showing the air pressure at the input of the press; pressure regulator in air unit; a gauge which shows in the air unit either a vacuum or a pressure in the air unit; 3-position switch, providing in the air unit either or vacuum or pressure. On the left side wall there is a connector for connection hose from the compressor.
    This press is intended for the repair and production of sneakers, shoes and boots with bowl-shaped soles from 6 to 16 men’s sizes. During pressing its diaphragm simultaneously presses against and the bottom of the sole as well as the part that surrounds the upper of the shoe. The clamping force is adjustable and can be up to 15 lbs/square inch (1,2 kg/square cm.)
    www.shoe-tools...

ความคิดเห็น • 8

  • @juanroman5935
    @juanroman5935 2 ปีที่แล้ว

    Hola soy de colombia y estoy inpresionado con sus proyectos amigo tiene muy buena estetica al momento de culminar los prototipos siga asi bendiciones👍👍

  • @batkhuunyamdorj5902
    @batkhuunyamdorj5902 6 หลายเดือนก่อน

    Hi im need your its that machine im buy

  • @tolusobodu7106
    @tolusobodu7106 ปีที่แล้ว

    Hi what is the cost of the Machine

  • @pogosterakopian4417
    @pogosterakopian4417 2 ปีที่แล้ว

    Очень дорого. И насколько рощитана эластическая часть... Ей цена 250 300 и то много если без компрессора.

  • @Метеорит-р6х
    @Метеорит-р6х 2 ปีที่แล้ว

    Здравствуйте. Где можна купить такой станок?. Дайте пожалуйста ответ.

    • @kaa19-68
      @kaa19-68  2 ปีที่แล้ว

      Здравствуйте. Пресс производится в Украине. Примерная стоимость около 2000 у.е.

    • @kaa19-68
      @kaa19-68  2 ปีที่แล้ว

      www.shoe-tools.com/

  • @juanroman5935
    @juanroman5935 2 ปีที่แล้ว

    Hola soy de colombia y estoy inpresionado con sus proyectos amigo tiene muy buena estetica al momento de culminar los prototipos siga asi bendiciones👍👍