You have to be one of the most entertaining youtubers, with excellent quality videos and really high quality builds. Please post more!! I regularly wonder when the next video is coming!
hey man, love the work would love to see some behind the scenes stuff if your down to do that, more content is better right? "what can go wrong?" top 10 famous last words.
Bought me a shirt. I like to think, in some small way, I am contributing to the development of a new DSM entry: Post Traumatic Gas Tank Repair Disorder. Awareness is the first step to finding a cure, you know.
This has to be my favorite channel! Ronnie, please do your best to upload more! You're videography and editing are amazing! Thanks for putting things on the internet worth watching!
As an ex carport technician, please consider a few things to ensure your safety: *Put in stoppers at the end of the tracks, there's a risk that it flies out the back if you open it overly enthusiastically. *Install a horizontal brace from one track to the other at the end of the tracks that keeps the them from drifting apart - which would possibly dump a door onto you or your current project. The angle iron will work to fasten it onto, just have it as low as possible while making sure the door clears it. *Brace the door midway up as well, as wide doors tend to sag while open and tweak the rollers. At best, it's not going to seal properly from weather, at its worst it will pull the rollers out of their bracket.
I've worked with these since i was 14, and i agree. proper quality doors comes with windbraces when they're this wide, usually in every other segment depending on how tall they are
As a huge fan and the owner of a concrete and masonry business it was fun to see you tackle that side of the project yourself. You did an excellent job. Our business doesn't scale well down to projects that size and i tend to not provide quotes but instructions on how to DIY in an attempt to create goodwill for future projects instead of angry/confused faces.
@@bigdwook973 its not that simple his worker doesn't have insurance that's asking to put his men under the bus if the customer is used to pulling cons for free work done ive been that guy lol the legal system cost more that eating the cost.
Very nice work! FYI, if you still haven't put siding on, you can increase the shear strength of the OSB by increasing the amount of nails on the perimeter of each panel up to 2" OC. You'll probably want to make sure each edge has a full 1.5" of bearing surface (a full stud width) when you put in that many nails, though, to prevent splitting. It's mostly limited by the nails ripping through the board, so more nails = more surface area that has to rip. Also short panels like this can benefit from seismic hold downs even just for wind, because it keeps the entire panel from rotating independently and pulling through the sill bolts. You can probably re-use the same bolts you already have in place for this.
Additionally, pulling the building back into place when you address the other walls will help a lot. Getting shear strength in the back and side walls is a good idea. Might as well do it if/when you take the siding off.
I initially came to your channel for the car content then realized I absolutely adore your filmmaking style and sense of humor! Great video as always. you manage to bring levity and interest to the most mundane tasks. I learn a lot and laugh even more. We all also appreciate your humility and willingness to let us into the WHOLE process, failures and all. Which as we know NO project goes without SOME form of mistake. GREAT JOB!
Man. I have a garage I wanted so badly when I bought the house, but havent been in it other than to grab the mower for years. Its this kind of stuff that inspires me to stop being a baby and get out there to turn it into what I want. Thanks, my man. EDIT: I also feel completely gaslit by the light switcharoo. Worth it.
Don't forget the zip tape for the zip board! So happy to see we FINALLY got another installment!! keep up the great work! Tied best channel on TH-cam with M539 Restorations IMO!
A double wide roller shutter door would be perfect for this, no hangers required and you gain headroom on the sides. Bonus is it remains fully enclosed so doesnt get covered in grinding dust while you're working in there with the door open.
My thought was to get roller track that hugs the roof. My dad's garage has a side mounted opener and track for the door to hug the wall as it opens and leaves no overhanging obstacle.
@@LovelessAndroidunfortunately, that would require custom tracks and a spring calculated to match. That conversion is about as expensive as getting a new door, with more drawbacks.
How is it that most youtube videos seem to be way too long but yours are always over too soon? You are an amazing story teller and I look forward to every one of your videos. Keep up the good work and good luck on the rest of the shop build!
Once again loving your humor, editing, showing the good stuff off the process, not super overexplaining how you solved relatively trivial crap for 10 minutes, love your videos M8
We had the same problem with our garage in Houston. My contractor pulled it straight by hooking a come-along to an oak tree in our backyard and pulling it straight. Very much like what you did. Then he replaced a few rafters and reinforced some other parts of the frame. Beware, the extra wide garage door will tempt your garage to turn into a parallelogram once again. Keep an eye on it.
as someone a novice when it comes to carpentry and someone who is about to start a career in construction, I really appreciate your humility to show not just the process and such but also your mistakes and how you fixed them. It takes courage to fuck shit up and keep going and that's something everyone can appreciate.
From cars to essentially learning how to structurally support a building I think you’re the actual best example of the TH-cam guy who just doesn’t understand skill limitations 🤷♂️ I’ll wait for the videos where you teach us how to fly commercial aircraft’s 👍
Ronald, that was one of the most entertaining and humorous videos I've seen in a while. Great production values and good writing. Congrats on the new door. (and not dying)
I really needed to see this. My Dad died a few years ago and left me his shop. It's huge, it's old, and it needs a ton of work. I've been very overwhelmed, but watching this makes me feel like it's time to get started. Great content as per usual 👍
Keep the water out from above and below the building and make sure the electrical installation doesn't self-ignite, and the rest probably isn't going to be time-sensitive. Good luck!
@@dratilhelvetedotlol Those are actually my two biggest fears. It's got old electrical, a leaky roof, and it's made of wood. Insurance companies won't touch it.
Your content alone is amazingly entertaining, but your editing is just the cherry on top! Love what you do dude! Cracking job on the wall/door. Looks awesome!
If you're not going to replace those other existing walls or put OSB sheathing on the inside to act as shearing, you should probably retrofit them with diagonal bracing on the inside, either with wood like you did on that small wall next to the garage door, or with angle iron. You can just cut a saw kerf diagonally through all the studs and slip it in and then drill holes through the angle to attach it to the studs.
Your content is awesome Ronny. Love the self deprecating humour and your showing your mistakes and learnings along the way. You deserve 10 times the subscription you have. Can't wait for the next video. 🙂
I hate waiting so long between episodes but it's so worth it. Editing and perfect comedic timing are what make me continue to come back lol, can't wait to see what you do next!
I loved your workshop renovation videos. It's been so long I forgot about ya (sorry), but you did such a good job on the thumbnail I was like...someone is tearing down a perfectly good workshop, gotta watch that.
Back when that was built we all used diagonal boards on all sides set to pull on its self when racked by wind. Great video, Just need more of them more often lol.
Ronnie, your videos make me so happy. Your attention to detail, humor, and editing style are simply superb. Thank you so much for making the wonderful content you do. I'll be eagerly awaiting the next one. Can't wait!
Best content ever ! Funny, smart, educative, humble and authentic. Don't stop ! But please be careful with all these heavy stuff falling on your head...protect yourself !
My torsion spring recently broke and after a little DIY research I came to the same conclusion as you. Not worth saving $200 to risk missing body parts or possibly death.
Dude, I first started watching you when you bought the fiero. The amount of video skill you've gained while still keeping it authentic to you is incredible! You're an inspiration!
Hi Ronald, you can get roller track with a different curve angle to keep the garage door close to the roof and keep that hard won ceiling height you created.
Absolutely love the little Easter eggs in crazy stuff with time travel and things you do in many of your videos! Ronnie being there to greet you at 2 minutes 18 seconds, priceless!
as someone who has done drainage for years i suggest "drain tiles" for your gutters to run as much water away from your foundation if possible. and making a low point for water to run to only has to be a few cm lower it will work better than a drain cut into the driveway medium to heavy rain will flow over it and they need cleaned very often almost weekly if you have tree near by hopefully this helps so far looks like a true Carpender is at work cant wait to see how it looks fixed up
genuinely out of every youtuber i watch the effort and effects you put into your video thats just your own comedy is my favorite , the little snippets of your self is hilarious , the other one you did in the dark when you were doing the lights was top tier lol
Well young man. Glad to see you back again. I am a retired CARPENTER JOINER here in the UK and let me tell you, you did yourself proud with that workmanship and would put many to shame who I've worked with who call themselves JOINERS. Well done you. 10 out of 10. See you soon again I HOPE. 👍👍👍 I also own 1985 HONDA VF 500 F11 like you do. But you call them INTERCEPTORS.
You've given me so much confidence to attempt to modify one wall of my shop. It has one single-pane window that I want to replace with some double-paned Pella windows I got for free. Time to start planning for the summer!
I love the videos on this workshop build... As much as I would love to say a weekly video would be epic, as a TH-cam creator myself, I know how much time must go into making these and I would rather see the content quality remain for frequency! Will be buying a T-Shirt for sure!
Building work. For me, about as exciting as watching paint dry...............unless it's Mr Finger doing the building! Yet another brilliant video, with several laugh out loud moments. This is one of the best TH-cam channels bar none!
FYI, you can also buy concrete grinding discs for 4”angle grinders at pretty much any store that sells grinding discs (hardware, Tractor Supply, etc). Just for future knowledge.
In retrospect, perhaps tearing down the entire building and restoring the foundation to build a new shop would have been less headache, but we're here now and i like the way your doing this. Me personally i would have done bard door style doors, but thats my preference. Keep up the good work buddy.
It can look like a daunting task to replace a rotting foot rim, but it's actually not that hard to replace it section by section if you have three long jacks.
Watching this video makes me realize that, if it was my project, the garage would still be leaning/falling over, water would still be coming in and I'd have to come in and shut the door to turn on the lights.
I like how you never swear when things go wrong or fall on your head, how you never get injured, how things go perfectly every time, you lead a charmed life! Loved this video, had the right balance of Dad jokes and sarcasm to finish the week on. This has inspired me to go put a couple of squirts of oil onto my garage door rails.
I'd definately check the slop on that car port and maybe even line some gutters around it, because unless your shop is downhill there's no reason THAT much water should be getting in there.
I was REALLY hoping to see your solution to the garage door tracks was going to be converting them to high lift tracks instead considering you went through the trouble of creating a cathedral ceiling.
Good to see you continuing along with your projects. I got really excited at the sight of the Honda Interceptor in the first part of the video as my father has his VF500 still, hopefully there'll be a video on that in the future once you have your shop up and running.
If you want to help me tear down more things, I present to you... a cool shirt: ronald-finger.creator-spring.com/listing/ronnies-automotive
Love your videos, when you post them. You want us to support your channel, how about actually posting videos?
You have to be one of the most entertaining youtubers, with excellent quality videos and really high quality builds. Please post more!! I regularly wonder when the next video is coming!
Here here.
hey man, love the work would love to see some behind the scenes stuff if your down to do that, more content is better right? "what can go wrong?" top 10 famous last words.
Bought me a shirt. I like to think, in some small way, I am contributing to the development of a new DSM entry: Post Traumatic Gas Tank Repair Disorder. Awareness is the first step to finding a cure, you know.
This has to be my favorite channel! Ronnie, please do your best to upload more! You're videography and editing are amazing! Thanks for putting things on the internet worth watching!
My thoughts exactly! Ronnie, please upload more! This is my favorite channel on TH-cam -for real!
@RonaldFinger What he said..! ^^^^
same
I second that
Quality requires time.
As an ex carport technician, please consider a few things to ensure your safety:
*Put in stoppers at the end of the tracks, there's a risk that it flies out the back if you open it overly enthusiastically.
*Install a horizontal brace from one track to the other at the end of the tracks that keeps the them from drifting apart - which would possibly dump a door onto you or your current project. The angle iron will work to fasten it onto, just have it as low as possible while making sure the door clears it.
*Brace the door midway up as well, as wide doors tend to sag while open and tweak the rollers. At best, it's not going to seal properly from weather, at its worst it will pull the rollers out of their bracket.
Nice additional thoughts. Hoping he has more than mere drain and support issues in mind.
I agree on this specifically on struts, I always preferred to use at least a top and mid strut on overhead doors that wide
I've worked with these since i was 14, and i agree. proper quality doors comes with windbraces when they're this wide, usually in every other segment depending on how tall they are
As a huge fan and the owner of a concrete and masonry business it was fun to see you tackle that side of the project yourself. You did an excellent job. Our business doesn't scale well down to projects that size and i tend to not provide quotes but instructions on how to DIY in an attempt to create goodwill for future projects instead of angry/confused faces.
couldnt you solve this by just asking if any of your guys want to do some side work? bet some would help for some free beer. just curious really.
@@bigdwook973 its not that simple his worker doesn't have insurance that's asking to put his men under the bus if the customer is used to pulling cons for free work done ive been that guy lol the legal system cost more that eating the cost.
Now that's good business strategy right there. Good on you brother.
Great job
we need more business owners like you in the world.
Mans loves redundancy so much he measures twice AND cuts twice
Always gotta drop everything I’m doing whenever I get a Ronald Finger video notification. Easily one of my favorite creators on the platform.
Agreed I should be studying for a final, but instead Ronny time!
Ronnie is a Master and leaves you always wanting for more. ummm that just sounds wrong
Even more agreement! I particularly enjoy Ronnie's editing - always colourful :)
I agree, I should be in the bed and I saw this pop up and just had to watch it. the best!
no guys prioritize your work at hand , forget about the video
Very nice work! FYI, if you still haven't put siding on, you can increase the shear strength of the OSB by increasing the amount of nails on the perimeter of each panel up to 2" OC. You'll probably want to make sure each edge has a full 1.5" of bearing surface (a full stud width) when you put in that many nails, though, to prevent splitting. It's mostly limited by the nails ripping through the board, so more nails = more surface area that has to rip. Also short panels like this can benefit from seismic hold downs even just for wind, because it keeps the entire panel from rotating independently and pulling through the sill bolts. You can probably re-use the same bolts you already have in place for this.
Additionally, pulling the building back into place when you address the other walls will help a lot. Getting shear strength in the back and side walls is a good idea. Might as well do it if/when you take the siding off.
Glue and nails is even stiffer
Could it help to also add some OSB to the inside? Seems like that would double the shear strength.
@@steveschannel4759 yes you can also do that
We miss you😢
What
I initially came to your channel for the car content then realized I absolutely adore your filmmaking style and sense of humor! Great video as always. you manage to bring levity and interest to the most mundane tasks. I learn a lot and laugh even more. We all also appreciate your humility and willingness to let us into the WHOLE process, failures and all. Which as we know NO project goes without SOME form of mistake. GREAT JOB!
There is nothing to add. 👏
I started watching your channel during the Fiero series. Subscribing to your channel was a great decision. I appreciate your work.
You made me laugh out loud numerous times in this one! Great work Ronald, thank you for chronicling your build experience for us all :)
As somebody who had been installing garage doors for a long time. I am glad you called somebody to install the spring.
Ronald please I need a new fuckin video I'm having withdrawals from the finger!!!!!!
Man. I have a garage I wanted so badly when I bought the house, but havent been in it other than to grab the mower for years. Its this kind of stuff that inspires me to stop being a baby and get out there to turn it into what I want. Thanks, my man.
EDIT: I also feel completely gaslit by the light switcharoo. Worth it.
It’s finally here
kid named finger
Don't forget the zip tape for the zip board! So happy to see we FINALLY got another installment!! keep up the great work! Tied best channel on TH-cam with M539 Restorations IMO!
A double wide roller shutter door would be perfect for this, no hangers required and you gain headroom on the sides. Bonus is it remains fully enclosed so doesnt get covered in grinding dust while you're working in there with the door open.
Agreed, but very expensive
My thought was to get roller track that hugs the roof. My dad's garage has a side mounted opener and track for the door to hug the wall as it opens and leaves no overhanging obstacle.
@@LovelessAndroidunfortunately, that would require custom tracks and a spring calculated to match. That conversion is about as expensive as getting a new door, with more drawbacks.
I thought of this as well, but if he's doing everything on a budget may not be an option
Finger-san, you should definitely put more videos out. Quality, humour and editing are superb.
The problem is that quality, humor and editing makes projects take SO much longer.
I know … you can have your project done cheap, fast and well. Pick two.
@@AJC508 I'm a senior software developer... you have no idea how many times I've had to explain precisely that to both management and customers.
How is it that most youtube videos seem to be way too long but yours are always over too soon? You are an amazing story teller and I look forward to every one of your videos. Keep up the good work and good luck on the rest of the shop build!
Once again loving your humor, editing, showing the good stuff off the process, not super overexplaining how you solved relatively trivial crap for 10 minutes, love your videos M8
We had the same problem with our garage in Houston. My contractor pulled it straight by hooking a come-along to an oak tree in our backyard and pulling it straight. Very much like what you did. Then he replaced a few rafters and reinforced some other parts of the frame. Beware, the extra wide garage door will tempt your garage to turn into a parallelogram once again. Keep an eye on it.
as someone a novice when it comes to carpentry and someone who is about to start a career in construction, I really appreciate your humility to show not just the process and such but also your mistakes and how you fixed them. It takes courage to fuck shit up and keep going and that's something everyone can appreciate.
I swear he adds it in out of frustration :D
From cars to essentially learning how to structurally support a building I think you’re the actual best example of the TH-cam guy who just doesn’t understand skill limitations 🤷♂️ I’ll wait for the videos where you teach us how to fly commercial aircraft’s 👍
Ronald, that was one of the most entertaining and humorous videos I've seen in a while. Great production values and good writing. Congrats on the new door. (and not dying)
I really needed to see this. My Dad died a few years ago and left me his shop. It's huge, it's old, and it needs a ton of work. I've been very overwhelmed, but watching this makes me feel like it's time to get started. Great content as per usual 👍
Keep the water out from above and below the building and make sure the electrical installation doesn't self-ignite, and the rest probably isn't going to be time-sensitive. Good luck!
You can make this man, make a list and go one job at a time.
Good luck with the shop man ! You can do this, go slowly and one thing at a time; you’ll get there eventually :)
@@dratilhelvetedotlol Those are actually my two biggest fears. It's got old electrical, a leaky roof, and it's made of wood. Insurance companies won't touch it.
Thank you all for the encouragement, it means a lot!
Your content alone is amazingly entertaining, but your editing is just the cherry on top! Love what you do dude! Cracking job on the wall/door. Looks awesome!
If you're not going to replace those other existing walls or put OSB sheathing on the inside to act as shearing, you should probably retrofit them with diagonal bracing on the inside, either with wood like you did on that small wall next to the garage door, or with angle iron. You can just cut a saw kerf diagonally through all the studs and slip it in and then drill holes through the angle to attach it to the studs.
Here's to hoping he has much more in mind, aside from drainage and rotting wood. I was expecting an entire new building but, this is a start.
garage of theseus
These videos are absolutely fantastic. Your sense of humor and editing are top shelf, cheers buddy.
This takes me back to working with my dad on our garage. Great video
I'm surprised you didn't get angled garage door tracks so that the door when open would be parallel/flush with the roof after all that work.
Would be great but it takes a whole different spring solution to balance it out.
@@jonasthemovie But would it be worth it ?
Yes ;)
@@firefly2472 I would do it
Especially if you want a lift in there.
Man, please, more videos! even if it's not a complete job, but we love your content and the wait is too much!
2:19 gold
yo? it's high boi
What in the crossover episode?
Your content is awesome Ronny. Love the self deprecating humour and your showing your mistakes and learnings along the way. You deserve 10 times the subscription you have. Can't wait for the next video. 🙂
I hate waiting so long between episodes but it's so worth it. Editing and perfect comedic timing are what make me continue to come back lol, can't wait to see what you do next!
stuff like this gets me hyped to work on a trailer I have sitting out in my yard
I loved your workshop renovation videos. It's been so long I forgot about ya (sorry), but you did such a good job on the thumbnail I was like...someone is tearing down a perfectly good workshop, gotta watch that.
Back when that was built we all used diagonal boards on all sides set to pull on its self when racked by wind. Great video, Just need more of them more often lol.
Put some on the back wall. Easy enough since it's all open right now...
Ronnie, your videos make me so happy. Your attention to detail, humor, and editing style are simply superb. Thank you so much for making the wonderful content you do. I'll be eagerly awaiting the next one. Can't wait!
I used the same ratchet strap trick on my 12x8 shed. Those little guys deserve a raise.
Best content ever ! Funny, smart, educative, humble and authentic. Don't stop ! But please be careful with all these heavy stuff falling on your head...protect yourself !
Lumber and heavy beams of any material hold no punches
Closed cell spray foam will add tons of rigidity to the structure. Also if you sheath the back wall inside with plywood it will help too. 😊
That contractor's quote for the concrete work is a "that's not worth my time" price to just avoid saying "no we won't do that"
Comedy at it´s best! I love it. 🤣🤣 And a pretty good job done by a layman. Thumbs up, Ronald! 👍
My torsion spring recently broke and after a little DIY research I came to the same conclusion as you. Not worth saving $200 to risk missing body parts or possibly death.
Yeah, I saw the damage mine left on the wall above the door when it went and decided I wanted nothing to do with that.
Came here for the car videos, staying for the workshop building videos 😂
Dude, I first started watching you when you bought the fiero. The amount of video skill you've gained while still keeping it authentic to you is incredible! You're an inspiration!
Mr finger, please keep doing what youre doing, you have the total support of a youtube professional!
As always, the editing and storytelling is top notch on these videos. Another great watch!
Come for the projects, stay for the jokes and superb editing.
Hi Ronald, you can get roller track with a different curve angle to keep the garage door close to the roof and keep that hard won ceiling height you created.
Could’ve done a roll up garage door…
Absolutely love the little Easter eggs in crazy stuff with time travel and things you do in many of your videos!
Ronnie being there to greet you at 2 minutes 18 seconds, priceless!
as someone who has done drainage for years i suggest "drain tiles" for your gutters to run as much water away from your foundation if possible. and making a low point for water to run to only has to be a few cm lower it will work better than a drain cut into the driveway medium to heavy rain will flow over it and they need cleaned very often almost weekly if you have tree near by hopefully this helps so far looks like a true Carpender is at work cant wait to see how it looks fixed up
Excellent, excellent!
Just found your channel and can watch you work all day, love the content and happy to be part of the subscriber family !!!
How did i miss this episode. Great build Ronnie. Loved it. It brought me back to learning when i did my garage doors on my own.
I admire your willingness to do the work. This was a cool video and well done.
COME ON! PUT OUT A NEW VIDEO MAN!!!!!
genuinely out of every youtuber i watch the effort and effects you put into your video thats just your own comedy is my favorite , the little snippets of your self is hilarious , the other one you did in the dark when you were doing the lights was top tier lol
Dude, I LOVE your humor. Thanks for the laughs. Your editing keeps the audience engaged and you tell a great story while teaching.
Watching you work makes me feel better about all the million mistakes I make when doing anything at all.
It’s been 4 months without a POST
Well young man. Glad to see you back again. I am a retired CARPENTER JOINER here in the UK and let me tell you, you did yourself proud with that workmanship and would put many to shame who I've worked with who call themselves JOINERS. Well done you. 10 out of 10. See you soon again I HOPE. 👍👍👍 I also own 1985 HONDA VF 500 F11 like you do. But you call them INTERCEPTORS.
I thoroughly enjoyed this. Literally every bit of it. Keep killing it man!
You've given me so much confidence to attempt to modify one wall of my shop. It has one single-pane window that I want to replace with some double-paned Pella windows I got for free. Time to start planning for the summer!
I love the videos on this workshop build... As much as I would love to say a weekly video would be epic, as a TH-cam creator myself, I know how much time must go into making these and I would rather see the content quality remain for frequency! Will be buying a T-Shirt for sure!
I love when Ron drops a new video. Taking a lot of inspiration for my shed to workshop reno!
Building work. For me, about as exciting as watching paint dry...............unless it's Mr Finger doing the building! Yet another brilliant video, with several laugh out loud moments. This is one of the best TH-cam channels bar none!
As always, top tier production. Your videos and content are always inspiring and entertaining.
So glad another video is here I have watched all your videos so many time i love them all and your content is honestly so honest and helpful as well
One of the best car channels on TH-cam when it’s come to videography and editing. Adds a special touch making the videos more enjoyable.
Your editing alone makes watching the videos worth while.
If you are insulating use plywood sheathing for the back wall to prevent the garage to go out of square.
And when the world needed him most, he uploaded.
Dude 5 months? Chop Chop, lets hurry the heck up on the shop
Easy to follow and down to earth presentation.
FYI, you can also buy concrete grinding discs for 4”angle grinders at pretty much any store that sells grinding discs (hardware, Tractor Supply, etc). Just for future knowledge.
This is the second video I've seen and your funny AF... Great job, can't wait to see the progress..
In retrospect, perhaps tearing down the entire building and restoring the foundation to build a new shop would have been less headache, but we're here now and i like the way your doing this. Me personally i would have done bard door style doors, but thats my preference. Keep up the good work buddy.
You had me laughing out loud so many times!
You've made some nice progress with the garage sir. Nice!
We love everything you do Ronald!
What a rollercoaster that was. Can't wait for the electrical, insulation, wood repair.... everything else basically lol
New Favourite Channel On TH-cam. The "Its not a garage, Its a GARAGE" had me dying
It's like watching myself work. You have no idea how much joy it brings me to watch someone else drop sheet goods on their effing toes.
I can watch this guy work on anything and be entertained. Keep up the good work.
Always love a video form you !
im hooked to see the entire garage rebuild
The quality of this video is so top notch. Like leaps above your other stuff.
It can look like a daunting task to replace a rotting foot rim, but it's actually not that hard to replace it section by section if you have three long jacks.
Watching this video makes me realize that, if it was my project, the garage would still be leaning/falling over, water would still be coming in and I'd have to come in and shut the door to turn on the lights.
the only car channel that works on his garage more than his car.
Whatever, I enjoy it.
Funny sayings combined with great clips. I love it. Please don't stop your videos. ❤
So happy to have a new upload from you! Keep up the great content!
The jokes, the work, this is at least the channels I follow. The best content maker. Hope you keep making more and more like these :)
I like how you never swear when things go wrong or fall on your head, how you never get injured, how things go perfectly every time, you lead a charmed life! Loved this video, had the right balance of Dad jokes and sarcasm to finish the week on. This has inspired me to go put a couple of squirts of oil onto my garage door rails.
Amazing comic timing. It's an absolute joy watching your videos.
I'd definately check the slop on that car port and maybe even line some gutters around it, because unless your shop is downhill there's no reason THAT much water should be getting in there.
Original builders poured the slab below grade 🙃
I was REALLY hoping to see your solution to the garage door tracks was going to be converting them to high lift tracks instead considering you went through the trouble of creating a cathedral ceiling.
Good to see you continuing along with your projects. I got really excited at the sight of the Honda Interceptor in the first part of the video as my father has his VF500 still, hopefully there'll be a video on that in the future once you have your shop up and running.
5 months with no upload? I guess I'll just watch this video again lol
Hope you are well Ronnie and life is treating you good