Great Video! Love how you use the zoom to maintain the same perspective as the excavator swings to dump the bucket. Excellent! Keep up the terrific work.
Should make those truck drivers pull in closer, especially when swinging a full bucket of that size, that machine shouldn't be cocking a hind leg! Very nice machine though!
Hi, I am a graduate student in construction major. I used one of your video clips in my paper to test my algorithm for detecting excavator in construction site. Since the copyright issue, can I obtain your permission to use one of the video clips? I will add the weblink of your video in my reference section. Thanks!
Ce chantier , ne serait-il pas en FRANCE ??? du coté de Troyes !!! Comme on voit sur la ligne d'horizon les pylônes de la ligne haute tension de la centrale électrique de Kembs sur le Rhin près de Bâle Mulhouse construite en 1933 avec des boeufs en direction de Paris, stoppé à TROYES pendant la guerre de 1939 1945 ??? Des pylônes que je connais bien , la ligne passant sur la commune de mon village en Haute-Saône vers ( Vesoul ) mon interrogation ? Ancien du TP et projeteur dessinateur du Génie civil en retraite . Je serais heureux d'une réponse possible . Cette centrale électrique et l'une des première construite en France quand débute les travaux canalisant le fleuve dès l'après guerre 1914 1918. Régulièrement sont tracer suit la Nationale RN 19 comme la voie de chemin de fer Paris EST , route de Bâle Mulhouse via la Suisse et l' Allemagne .... Merci de me lire ,toujours intéressé par les chantiers ! 11/02/18
Eu trabalho numa empresa de terra planagem la também tem PC mas é 200 perto dessa coitada e filhote pra encher o caminhão 15 conxada bem cheia essa é foda
Ian Bermingham research it. It makes 0 difference which way the idlers are for wear. Cat, Deer,komatsu, and liberr have all done study and all say makes now difference. Wear is the same on motors undercarriage and all other wear points. It’s a old guy myth, wake up and enter the modern age. You probably think gps is bad too!
Alberto Garcia idlers. You dig over them to protect the finals. Those idlers are cheap to replace compared to a 50,000$ plus drive motor. Cat even says to not dig over the finals. One truck 4 pass over 1.5 minutes with a 9.80 yard bucket. If he would fill it properly it would be a the pass machine with that bucket. How do I know? I run the same machine with a 9 yard bucket. Three pass is 52-57 seconds four pass 1:15-1:20 Loading hm400. With a grading bucket he has the advantage of a spade nose digging bucket.
Even when he's loading above them and doing decent time he's wasting movement by having the trucks pull to far ahead. Load off the corner or 45° not 90° makes a huge difference over a day, week and month.
I dont mean to be offtopic but does anybody know of a method to get back into an instagram account? I was stupid lost the password. I appreciate any help you can give me
@Carmelo Mustafa Thanks so much for your reply. I got to the site through google and im waiting for the hacking stuff now. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Carmelo Mustafa HOLY **** IT REALLY WORKED :O I literally hacked my IG login after ~ 40 mins by using the site. I had to pay 15 $ but for sure worth the price =) Thanks so much, you really help me out :D
Do you have any idea how much weight you can drop down from a bucket of that size? Also, it has air suspension, of course any truck will shake if that much weight is added in such a short time.
Slowest loading unit I've ever run. Hitachi/john Deere, and Cat will blow this away hands down. And don't blame the operator I had the service reps crank my 800 up but it already was and it was Just. As. Sl oo oo w
What a beast. Looks cool in white!
I was thinking the same, looks awesome in white.
Those big komatsus are no joke either.
Nice full buckets!!
Great Video! Love how you use the zoom to maintain the same perspective as the excavator swings to dump the bucket. Excellent! Keep up the terrific work.
09pm
I use to think pc200 and pc220 was big back in day and now pc800 ?? Big daddy machine there 😎
OMG, what a big bucket!
Essa sim, bruta hem, truck chega sair de banda.. não tem pra ninguém!!!
Edilson Rocha ♈k
Edilson Rocha euruwuriwhrushr
Edilson Rocha je
ggfgytygytytt4ytytygtgttttttttttttyyyyytttttyyyyytttttttttyyyyyyyttttttttyyyy509876543210987654321
mrk) l)ok)y😊1qM 😅😊😅
Super 800 💪👍👏👏
Super vid, thanks for sharing :)
فف5444 من قبل ما 551ققف4
esssa e a escavadeira show de bola
Should make those truck drivers pull in closer, especially when swinging a full bucket of that size, that machine shouldn't be cocking a hind leg! Very nice machine though!
.m
Just fucking send it. They will learn or it's their back.
j
The doser tells you why. If the operator doesn’t keep his area clean the trucks can’t get close enough.
what a great loader and operator
Best Komatsu in Europe,i think !
Benno Van Woudenberg งงซ
Lp0rl5p5799
Good vídeo!!!!!!
Rc Trucks & Machines 78iiu9!iiijjfqr
Rc Trucks & Machinel
ws
Rc Trucks and Machines hhjfhfh
Rc Trucks and Machines
Fantastic video! More of this!!
Nice sound from dozer tracks
nice video.
dual hydrolic ram in arm....woooo!
Gyananda Halam mass X have them. GP configuration is single.
It`s not everyday we can see a white color komatsu machine:)
Roger_Huang white green yellow... what problem color????????? stupid comment everywhere!!!!
@@snakecold6755 what is your problem? Leave people alone
Ada yang excavator komatsu pc800 yang warna putih.manteeep👍👍👍👍👍
nice
2 gầu đã đầy ặc 😆
Muito boa essa máquina.
Super produção
E
Cool
Exelente makina 👍👍
Mantapp,,yg smangatt kerjhax eew..
- um vídeo que poderia ficar horas assistindo...
👍👊💪brutal
Monstermachine,this PC800LC !!!
I' love komatsu track hole 😍😍😍 that's super power 💪💪💪
ให
power hot Komatsu 👍🏼
why
he does not balance when he empties the bucket
Essa PC 800 é foda 2 conxada já tá barrufado
Он прекрасен!
at first i thought it was a liebherr
So it loaded that iveco with just 2😮😮passes
Какой же у него ковшичек))
That PC800 can hog! Love watching the big Iron
One bucked load and it almost broke the Iveco's suspension.
Borislav Paraskov
Yeah what ?
VincentTG shut up. this is vehicle.
VincentTG
esssa é das boas viu gostei
muito bom 😃😎
mind-numbing isn't it
Whos stronger this pc 800 or leibherr 984?
😍😍
يا رب ارزقني بواحدة كهده.آمين.
Aqwa Aqwa
يارب انا وانت
Aqwa Aqwa امين يارب اجماعين
Good..
Hi who is the company with the PC800 and Volvo Dumptrucks ?
Chris Rankin oe
ba maquina !!!!!.
l
lp
lp
you can s
you can s
why when he let the bucket, back side get up;
Trucks too far from machine.
Buồn buồn nó đưa lên cao thả đất xuống cái xe 4 chân kia song nhíp luôn
Uma dessa ai em Brasília-DF faria um estrago nos corruptos que quebraram nosso País......
Good
👍👍👍
That bucket is almost a half a yard to big see how low he is to lift overtop the trucks hes at his hydraulics limit. Need to load from higher ground
This Komatsu has very narrow tracks, hasn't it?
qmpel yes. The one I run has 30" pads and they can come up to 42 or 44" pads.
my suka sekali
Hi, I am a graduate student in construction major. I used one of your video clips in my paper to test my algorithm for detecting excavator in construction site. Since the copyright issue, can I obtain your permission to use one of the video clips? I will add the weblink of your video in my reference section. Thanks!
+袁晨曦 I am curious what you mean by "detecting excavator in construction site". What exactly does your algorithm look for?
just like face detection when we are taking photos using camera. Instead, i am detecting construction equipment on construction site from videos.
袁晨曦
You TROUBLES HAVE A GOOD BUDDY DOWNLOAD TRACKS HAVE PROBLEMS OR WHAT WAS LOADS TROUBLES
buena máquina pará cargar más rápido Los camiones
👏👏👏💎💎💎
Good operator 👍👍👍
Pc 210
Are you drunk Phil ? Hes feckin brutal
Vietnam excavators like you
vet vet
신들린레박
digging over the track motors is a big no no
Andrew Maude and why is that?
@@MrJason7680h It's hard on the sprockets and the chain on the tracks.
@@MrJason7680h Contact with bucket during operator error, and unnecessary shock loads to the final drive bearings.
ыхгэ
gara gara ini adek gw nangis
why dig in this place ?
super man Still looking for Jimmy Hoffa.
super man fuck you. this is vehicle!!!
super man jjust jjj
Ce chantier , ne serait-il pas en FRANCE ??? du coté de Troyes !!! Comme on voit sur la ligne d'horizon les pylônes de la ligne haute tension de la centrale électrique de Kembs sur le Rhin près de Bâle Mulhouse construite en 1933 avec des boeufs en direction de Paris, stoppé à TROYES pendant la guerre de 1939 1945 ??? Des pylônes que je connais bien , la ligne passant sur la commune de mon village en Haute-Saône vers ( Vesoul ) mon interrogation ? Ancien du TP et projeteur dessinateur du Génie civil en retraite . Je serais heureux d'une réponse possible . Cette centrale électrique et l'une des première construite en France quand débute les travaux canalisant le fleuve dès l'après guerre 1914 1918. Régulièrement sont tracer suit la Nationale RN 19 comme la voie de chemin de fer Paris EST , route de Bâle Mulhouse via la Suisse et l' Allemagne .... Merci de me lire ,toujours intéressé par les chantiers ! 11/02/18
apik
Eu trabalho numa empresa de terra planagem la também tem PC mas é 200 perto dessa coitada e filhote pra encher o caminhão 15 conxada bem cheia essa é foda
Heavy duty
Die Zahnräder vom Raupenfahrwerk immer nach hinten stellen.
spirit of success ❤️ semangat sukses 👋
mntam oh alat e
Digger driver is rough as guts and has the idlers the wrong way for digging
Ian Bermingham research it. It makes 0 difference which way the idlers are for wear. Cat, Deer,komatsu, and liberr have all done study and all say makes now difference. Wear is the same on motors undercarriage and all other wear points. It’s a old guy myth, wake up and enter the modern age. You probably think gps is bad too!
@ 3:40...whoa big fella...
the machine had no connection with the operator
คมผ22ช
Mi pasión siempre ancido la maquinaria pesada la amo
thats the fastest he can go?
Augustin Dolcy l
Ok waw
Малодец за видео спасибо
Ne kamyonlar var be
rookies dig over the finals
Deere2154D m
Deere2154D
.
Is it better to dig over the guide wheels? Why? An old school operator told me that it is better to dig over the finals to protect the guide wheels
Alberto Garcia idlers. You dig over them to protect the finals. Those idlers are cheap to replace compared to a 50,000$ plus drive motor. Cat even says to not dig over the finals. One truck 4 pass over 1.5 minutes with a 9.80 yard bucket. If he would fill it properly it would be a the pass machine with that bucket. How do I know? I run the same machine with a 9 yard bucket. Three pass is 52-57 seconds four pass 1:15-1:20 Loading hm400. With a grading bucket he has the advantage of a spade nose digging bucket.
Even when he's loading above them and doing decent time he's wasting movement by having the trucks pull to far ahead. Load off the corner or 45° not 90° makes a huge difference over a day, week and month.
7 m3??😳
10м3
MANTAP
Agora, esses caminhões amarelo não dá nenhuma segurança p o seu motorista, se uma pedra escapar por cima da caçamba esmaga a cabine
Пиити
should be diggers over his idlers. especially on a machine that large and expensive to maintain
I dont mean to be offtopic but does anybody know of a method to get back into an instagram account?
I was stupid lost the password. I appreciate any help you can give me
@Ben Prince Instablaster ;)
@Carmelo Mustafa Thanks so much for your reply. I got to the site through google and im waiting for the hacking stuff now.
I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Carmelo Mustafa HOLY **** IT REALLY WORKED :O I literally hacked my IG login after ~ 40 mins by using the site.
I had to pay 15 $ but for sure worth the price =)
Thanks so much, you really help me out :D
@Ben Prince you are welcome :D
Ya sy sebagai orang Indonesia bisanya cuma sholat 5 waktu,rajin kemjid titik
Poor first truck got battered !!!
ืมมชชา
Dat was mijn werk
buzz tightear ญร
buzz tightevar aa7q679rf
buzz tightear ាំមា!្គ
how to destroy a truck with one bucket!
Hahahaha, Iveco loaded one bucket and shaked! still not strong enough for heavy work
Do you have any idea how much weight you can drop down from a bucket of that size? Also, it has air suspension, of course any truck will shake if that much weight is added in such a short time.
Dinossauro escavator
압사발이 2바가지 똥줄 타네!
800
I'm pull support 👈💯 Done 🛑💌👈
Komatsu PC800LC thank
Cotizar. 100. Equipos. Carretera. Nuevas. Boyacá. Huila
Cotización 300 equipos
Slowest loading unit I've ever run. Hitachi/john Deere, and Cat will blow this away hands down. And don't blame the operator I had the service reps crank my 800 up but it already was and it was Just. As. Sl oo oo w
سلام ابحث عن عقد عمل لدي شهادة عمل متخصص سايق الاة الوزن الثقيل شكرا
طوط
beko badag
Lnb
!
excavator a 120t
ㅍ