Rebarreling a Remington 700.

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 8

  • @kdrods3641
    @kdrods3641 2 หลายเดือนก่อน +1

    Enjoy the content keep it up

  • @Anishnabe69
    @Anishnabe69 7 วันที่ผ่านมา

    Been gunsmithing for many years but I've never installed an unfinished barrel. My lathe is not quite big enough for such work. Been wanting to try it though and your video helped inspire me. Thanks!

  • @MegaBait1616
    @MegaBait1616 2 หลายเดือนก่อน

    Great channel ......... subbed ya MB ..

  • @paulberkuta4965
    @paulberkuta4965 2 หลายเดือนก่อน

    Nice work - I found it interesting. Did you use anything on the jaws to protect the barrel from being marked by the jaws of the chuck?

    • @WillHenrysWorkshop-gunsmith
      @WillHenrysWorkshop-gunsmith  2 หลายเดือนก่อน

      The barrel is usually protected from the jaws by a piece of brass or soft iron rod. This protects the barrel while allowing it to pivot in the jaws while aligning it. There are much more elegant ways to do this but the brass or iron works fine. WH

  • @donaldpowers8331
    @donaldpowers8331 2 หลายเดือนก่อน +1

    Your part time camera operator is much better looking than you, ha ha. Remember Math is YOUR friend.