US - amzn.to/3cYEatX Canada - amzn.to/3a6mEC5 Australia - amzn.to/3742Ugz UK - amzn.to/3rI5bWv Germany - amzn.to/3aSJegI France - amzn.to/3tL4pKd Italy - amzn.to/3tQszTB Spain - amzn.to/2MLUJib Content TIMESTAMP 00:00 Intro 00:41 Unboxing 02:36 Look at the button 03:14 Working with smart devices 04:35 Setting up with Philips Hue Bridge 07:11 Final Summary ✅ Don't Forget to Like👍 this Video, make a Comment✍and Subscribe ▶ it makes these videos possible 😊
Nice vid perhaps a bit more on when things go wrong. Pressed button 'til blue in the face - nothing except continuous red led - reset nothing but red light - then reset by holding for a long time it eventually worked - also the diagram that comes with it doesnt say you have to prize the back off to get to the reset button - why didn't they just drill a small hole to obviate all that fannying about?
Thanks for the review! I do have a question about the smart button, wondered if you can help. I have three smart lights in my living room, two main lights and a lamp. Is there an option to set this button up to control the two main lights, but not the lamp? Thank you again.
Stand alone I will need two buttons for two lights within the same room? Is there any way to use one button for two lights controlled separately in the same room? Awesome video btw, keep up the good work!
I bought this for my wife and I to be able to turn on and off the lights without getting out of bed. Unfortunately you can only have one button per bulb so only she has the power, id like this a lot more if you could pair 2 buttons to one bulb like in my situation but apparently you can’t.
He says that this button can work without a bridge. Does it mean that if i have a lightbulb that works with Google Home without ANY bridge i can use this button to turn it on and off? (The lightbulb is from Nooie)
As always a very good and informative video with something that should be great but the product is very poor imo. I have 4 of these Hue buttons and none of them work anymore. 1 refuses to connect now despite being connected previously and that's after being reset (Philips refunded that for me), 1 forgets, after a few days, what it was programmed to do and the other 2 chewed through a battery per week despite not being used.
@@GeekStreet replaced with new batteries and still problem exists. When checking the voltage of the "used" batteries they were 2.5V after a week and only being used a handful of times
Is there any device like this (stand alone button, connect thru wifi) that works with tuya/smartlife ecosystem? Because i dont have phillips device and its expensive lol
How in the name of all that’s holy did you manage to set it up so that it just turns the lights on and off? It’s absurd that it’s set up to toggle light temps. I’m going insane!
US - amzn.to/3cYEatX
Canada - amzn.to/3a6mEC5
Australia - amzn.to/3742Ugz
UK - amzn.to/3rI5bWv
Germany - amzn.to/3aSJegI
France - amzn.to/3tL4pKd
Italy - amzn.to/3tQszTB
Spain - amzn.to/2MLUJib
Content TIMESTAMP
00:00 Intro
00:41 Unboxing
02:36 Look at the button
03:14 Working with smart devices
04:35 Setting up with Philips Hue Bridge
07:11 Final Summary
✅ Don't Forget to Like👍 this Video, make a Comment✍and Subscribe ▶ it makes these videos possible 😊
Thanks so much for the video! Very detailed and clear. Your reviews are great, keep it up!
Thanks!
Nice vid perhaps a bit more on when things go wrong. Pressed button 'til blue in the face - nothing except continuous red led - reset nothing but red light - then reset by holding for a long time it eventually worked - also the diagram that comes with it doesnt say you have to prize the back off to get to the reset button - why didn't they just drill a small hole to obviate all that fannying about?
Thanks for the video, this seems really helpful. I'm definitely getting this!!
Thanks for the comment, its a really cool product so useful to have.
Good review. I had hoped this might be a replacement for a ceiling light switch but it's not, so thanks for the info.
Nice sharing stay connect friend
Thanks!
Geek Street you re welcome stay bless
Is the magnet pretty strong?
Do i need special bulb?
Merhaba
Güzel bir paylaşım
İyi akşamlar
Thanks for the review!
I do have a question about the smart button, wondered if you can help.
I have three smart lights in my living room, two main lights and a lamp.
Is there an option to set this button up to control the two main lights, but not the lamp?
Thank you again.
I’m sure if you make a zone in the Hue app that should be possible.
yes, you can customize that on hue app
Hi there, I'm looking for a light bulb that face in/out, which one are you using in this video?
Stand alone I will need two buttons for two lights within the same room?
Is there any way to use one button for two lights controlled separately in the same room?
Awesome video btw, keep up the good work!
assign the button and all the lights to a room then the button will control all the lights in that room.
thanks
You're welcome!
How do you pair it with the plug?
can I connect the button straight via BT to a bulb that's already connected to a bridge?
I bought this for my wife and I to be able to turn on and off the lights without getting out of bed. Unfortunately you can only have one button per bulb so only she has the power, id like this a lot more if you could pair 2 buttons to one bulb like in my situation but apparently you can’t.
nice video
He says that this button can work without a bridge. Does it mean that if i have a lightbulb that works with Google Home without ANY bridge i can use this button to turn it on and off?
(The lightbulb is from Nooie)
No the bridge is required to work with Google.
@@GeekStreet ahhh that is a shame. Thank you for the help :)
Thanks.
And how do I install this in the place where now my wall switch is? How do I ensure it looks tidy and electrically sound.
Look up a Hue Wall Switch Module, that goes behind your current switch
does it only connect to philips hue bulbs
I can't find a use for this for lights. I'd just press the wall switch lol
If you cut the power the smart bulbs using a dumb switch, they won’t be available to control via Alexa, via your automations, the app etc.
أحسنت النشر راااائع جدا جدا أستمر ربنا يوفقك ويكرمك بكل خير يارب ❤️
Thanks!
As always a very good and informative video with something that should be great but the product is very poor imo.
I have 4 of these Hue buttons and none of them work anymore. 1 refuses to connect now despite being connected previously and that's after being reset (Philips refunded that for me), 1 forgets, after a few days, what it was programmed to do and the other 2 chewed through a battery per week despite not being used.
Thanks for sharing your experience, could it be a low / weak battery causing this issue you've had?
@@GeekStreet replaced with new batteries and still problem exists. When checking the voltage of the "used" batteries they were 2.5V after a week and only being used a handful of times
@@aberdeenal3234 now thats annoying, I'm going use myself see how it goes.
Is there any device like this (stand alone button, connect thru wifi) that works with tuya/smartlife ecosystem?
Because i dont have phillips device and its expensive lol
Stay tuned i have product coming soon
good luck
How in the name of all that’s holy did you manage to set it up so that it just turns the lights on and off? It’s absurd that it’s set up to toggle light temps. I’m going insane!
I honestly don't see any need for this. I would either use a regular light switch or I would use Alexa's voice or an Alexa routine to turn on a light.
What a terrible how-to video
😳
Great upload my friend! Keep it coming!!! Enjoy your Sunday and as always full support from PETEFLICK!👍