You just made my glitter world turn upside down 😂 I don’t like using it,but I’m going to try it today!! I looove the Avacado going to make it today and thank you on the tip about the polyester glitter! 🙌🏽 Ordering some!
How did you get the avocado have just the trim instead of the downloadable full-size which you have to layer one color on top of the other I like how your glitter shines through instead of having all vinyl on the top
When buying glitter how do you know if it's polyester glitter? As far as the modpodge to apply the glitter would just the normal gloss Mod Podge work? Also is there a way to know just from looking at the Blanks which side is the front or back of it?
She has mentioned before that you need to measure it before and if it doesnt match exactly then turn the acrylic piece over and it should match to "perfection"
I use toothpicks to manage the UV with. All natural. Renewable. Non-plastic. Non-silicone. ;-p Oh, my watch has -EX on it too!!! Ha. Ha. OK, OK, my Mom's spirit just showed up, wagging that finger at me like a dog's tail at suppertime... Ahem, thank you for the videos, and all of your help!
I only put a small amount of resin on my discs and it still goes over the edge by itself. I use same resin as yourself. How do you stop this? Thank you 😊
Zindee ok thank you!! Your glitters are so cute and I didn’t even know you had them!! Until this video! I’ve ordered many of the acrylic blanks. I like to use the fine glitter for them. And it’s hard to fine really cute colors like yours. Thank you!!
Howdy and how do!!! Have you ever used poster putty to hold the acrylics in place? Works great! Ummm..... I don't know who your model is, but that young'un got's some big ol' hands....... ;-);-)
Do you ever have a problem with the resin or epoxy coming off. I have heard so many people say to sand the acrylic but never see that shown in a video.
These are just too stinking' cute!
Thank you!
I love Colorstreet nails too!
Judy Blaise I’m obsessed! 🥰
I love UV resin! I just ordered the Art Resin from y’all I’m going to try it soon! Love all the tips you give on your videos! ❤️
I love love love art resin! thank you!!!
You just made my glitter world turn upside down 😂 I don’t like using it,but I’m going to try it today!! I looove the Avacado going to make it today and thank you on the tip about the polyester glitter! 🙌🏽 Ordering some!
@@Jenni-wy3pw you're so welcome!! i used to hate working with glitter in the beginning and now totally addicted lol
Do you need to wear a mask with uv resin like you have to do with the regular 2 step resin?
This was AWESOME
These are super cute!!!🥰🦋🌸💕
That is such an adorably cute keychain! 🥰
This was very helpful
thank you!!
whats the best way to do the puzzle piece acrylic? i loveee and enjoy these
Love this
Thanks for doing another one of these gems! I have watched your other two over and over! Lol
thanks amanda!!! :)
How did you get the avocado have just the trim instead of the downloadable full-size which you have to layer one color on top of the other I like how your glitter shines through instead of having all vinyl on the top
Use the offset feature in your software 💜💜
Girl I see that Color Street 😂😉
Nice!!
do you have a video on how you did the vinyl of eyes and shape around the avocado?
Beautiful! Please do the a video on the sitting elephant.
will do!! :)
Hey Sherrell, what transfer tape do you use???
Do you have directions written/typed out as well? Like a supply list for your videos??
Adorable!!
what kind of vinyl did you use?
donde puedo comprar tus accesorios?
When buying glitter how do you know if it's polyester glitter? As far as the modpodge to apply the glitter would just the normal gloss Mod Podge work? Also is there a way to know just from looking at the Blanks which side is the front or back of it?
Will a LED lamp work?
How do you tell the front from the back of the acrylics?
Melissa M most are easy, but cut your vinyl first and then see which side of the acrylic matches it :)
These are sssssoooooooo cute!!!! 😍
thank you!!
Excellent tutorial! Thank you very much!!
Can you use a heat gun instead of a torch on the resin?
can you do a video on how you cut the vinyl for the the key chain
Instablaster...
How do you know which side is the front and which is the back?
She has mentioned before that you need to measure it before and if it doesnt match exactly then turn the acrylic piece over and it should match to "perfection"
I use toothpicks to manage the UV with. All natural. Renewable. Non-plastic. Non-silicone. ;-p Oh, my watch has -EX on it too!!! Ha. Ha. OK, OK, my Mom's spirit just showed up, wagging that finger at me like a dog's tail at suppertime... Ahem, thank you for the videos, and all of your help!
what transfer tape do you use? I am having a hard time finding good ones I like that work nicely!
what are those tools you use to clean the hole? where can I get them?
What kind of transfer tape did you use and where can I find those hand tools you used for the jump ring ?
Does this method work well with chunky glitter?
Did you show the trick for not getting the rough glitter edges? Or was it applying mod podge from middle to outside?
A piece of masking tape is the easiest way to remove the backing of stickers or acrylic backing.
Ours is wax coated so masking tape doesn’t stick to it ♥️
Hello, how do i fix the bubbles after it has been cured? I wish i had found this videos sooner 😢.
Depends on how bad the bubbles are but you can sand and add another layer of resin :)
👑
Where did you purchase the torch gun from?
Lindsay Martinez Ihave the same question!
Same, I need this in my life 😃
Dollar general
just purchased acrylic blanks and uv resin. could i mix glitter and UV resin together vs doing the modge podge method?
yep totally! in the badge reel video we show that being done :)
I only put a small amount of resin on my discs and it still goes over the edge by itself. I use same resin as yourself. How do you stop this? Thank you 😊
Hello love your videos !very helpful ! Where did you get the heat gun I love it I’m looking for a wireless
Dollar general
Where do you get the files to cut the vinyl?
Is there an specific brand of the glue we can get now? What would you recommend?
Does the UV resin stick good ..because when I do mod podge first sometimes the resin won’t stick
Love it 💕💕💕
#Zindee do you have a video on the peace keychain you have on Instagram?
So cute! Would I need to purchase the tortoise acrylic in order to get the face or can I just order the avocado and get the cut file for the face?
Gaby Morales the avocado does not automatically come with a face so you would have to use it from something else or make one :)
When is your glitters going to be back in stock on your site? There all out..?
Miranda Holloway we restock on Fridays :)
Zindee ok thank you!! Your glitters are so cute and I didn’t even know you had them!! Until this video! I’ve ordered many of the acrylic blanks. I like to use the fine glitter for them. And it’s hard to fine really cute colors like yours. Thank you!!
Do u wear mask when doing uv resin? I keep having go over edge .how I clean
How do you cut your acrilic?
Adriana ilustra the acrylics you buy already cut
Www.zindee.com
Can I cure the glitter side first with the protective sheet on the other side? Is it like a fire hazard?
Yes you can and no it's not. The doesn't get hot where it will catch on fire. You are just using a normal uv lamp like at the nail salon.
Howdy and how do!!! Have you ever used poster putty to hold the acrylics in place? Works great! Ummm..... I don't know who your model is, but that young'un got's some big ol' hands....... ;-);-)
where do u get the shape? key chains
Maribel Manzano www.zindee.com
Omg. Beautiful but the thought of accidentally glitter getting everywhere causes me anxiety.
Do you ever have a problem with the resin or epoxy coming off. I have heard so many people say to sand the acrylic but never see that shown in a video.
Hi! I have seen several people say you have to sand the acrylic blank before adding resin or it will pop off. Is that true?
Christina that is more of a preference :) I never sand and have never had an issue
@@Zindee Thank you for the response. I was worried.
Are you cutting your own acrylic? Do you have a tutorial?
She sells the acrylics on zindee.com
Has anyone gotten a glimpse of the name of the uv light that’s being used?
Check the badge reel video. I believe she shows you and talks about it.
xoxoxCaNdLeGiRlxoxox I was able to figure it out. Thx
oh man. approx 1 hour for one set? ouch.