Chào Bạn MrPatnico! Tuy chỉ là những đồ chơi phục vụ cho nhu cầu giải trí, nhưng Mình thật sự khâm phục và ngưỡng mộ Bạn. Cảm ơn Bạn thật nhiều, cảm ơn những Video Clip của Bạn! Chào thân ái.
If you use 1 servo to lower and rise the burner you could have some throttle control as well :) Or have a moveable sheet metal plate block the flame without putting it out.
@@MrPatnico I made a small oil lamp by gluing two bottom pieces of a soda can together. It gave it a nice round shape. Then I drilled two holes in the top of the can, one for the wick and the other for the filler hole of alcohol fuel. Then I took the top of the can and trimmed it until I had a nice ring to rest the fuel tank on. It was all glued with 2 component epoxy glue and will serve as the burner for my small engine. A screw was used to plug the filler hole. The wick runs true a small piece of brass tube.
AW this is so cute and functional. That'll be a little winter project for a birhday present. I love sound of the engine, it's a real little motor as it should be, hehehe :o)
Hey man thats so cool i have a pop pop boat and i always wanted to do that too!!!This is a very cool way to make a rc boat without charging any battery to drive it!!!
The running time is depending of the oil quantity in the burner. The boat of the video have a burner capacity of around 1/4 cc and works about 5 minutes.
Watched your previous video, saw the boat getting stuck in the plants in your lily pool. Now found this one. Fantastic job Man. Can you please make a video of this RC one in that pool. Thanx
Yes you can use epoxy. The boiler is the only one problem because it should be resistant at more than 120 °C. Iron is easy to sold with plumbing solder. This soldering is heat resistant but not works with aluminium. Of course, boiler should be perfectly sealed. If you find only aluminium can, you can use the Araldite glue with metal powder included for the boiler. This glue is more heating resistant than others For the rest of the boat, aluminium and epoxy are well
I don"t use candle but oliva oil. So it depend of the amount of oil in the burner. Say about 15 minutes. For the radio gear, the electric consommation depend of the sollicitation of the rudder. Many hours maybe.
Yes, it could make a nice video. I already did a test in a large pond. But I chose a bad day. There was little wind and the boat was upset. It is very light is very sensitive. I'll try again in the morning early, , before the wind picks up.
Je n'ai pas démantelé mon hélico. Comme j'explique dans le préambule, la carte ne fonctionnait plus que sur une seule voie. J'ai du la changer. Le pop-pop m'a permis de recycler la carte foireuse. Merci pour vos commentaires et bonne construction de pop-pop boat
super craaaaazzyyyyyyyyyy...... !!!!! so cooooollllll maaaannn
A late comment but I couldn’t help myself from letting you know that this is brilliant masterpiece. Physics is proud of you 👏
Thank you so much.
I wanted to do the same! (But little bigger) Will start training on building today!
Is it weird that I want to hug it? IT'S JUST SO CUUUUUUUUUUTE!!!!
Now you must install a miniature cannon on board to defend the ship ! :D
I once made a mini cannon, it would serve the purpose 😂
Yes, it was a bb cannon
Instablaster...
Childhood dreams come true awesome video! There needs to be races
i like your invent .is very nice
Many thanks
Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.
Congratulations! Good work and creativity. I love to see this boat running.
Greetings from Brazil,
Leandro.
Chào Bạn MrPatnico! Tuy chỉ là những đồ chơi phục vụ cho nhu cầu giải trí, nhưng Mình thật sự khâm phục và ngưỡng mộ Bạn. Cảm ơn Bạn thật nhiều, cảm ơn những Video Clip của Bạn! Chào thân ái.
my childhood dream..to make pop-pop boat controlled.
My favorite pop pop boat I’ve seen so far!!!
Many thanks !
Waouw! De plus en plus sophistiqué le pop-pop boat.
Sacrée dextérité pour fabriquer ce petit engin!
Using those tuna cans is so *ingenious*!!!!!! Going to copy that.
Just seen this video and a bit late for comments, but its great!
That is exactly how I imagined an RC pop-pop boat would work.
Brilliant job. :D
It is never to late for a good comment ! Building our dreams should be always our fashion.
@@MrPatnico : Thanks. :D
That's the best one yet.
Going to build a wooden one on the CNC machine and make it rc just like this 👌
I like the way you keep things simple as possible.
Thanks
If you use 1 servo to lower and rise the burner you could have some throttle control as well :) Or have a moveable sheet metal plate block the flame without putting it out.
That is a very good idea !
@@MrPatnico I made a small oil lamp by gluing two bottom pieces of a soda can together. It gave it a nice round shape. Then I drilled two holes in the top of the can, one for the wick and the other for the filler hole of alcohol fuel. Then I took the top of the can and trimmed it until I had a nice ring to rest the fuel tank on. It was all glued with 2 component epoxy glue and will serve as the burner for my small engine. A screw was used to plug the filler hole. The wick runs true a small piece of brass tube.
@@kezzler9556 Good job !
@@kezzler9556 did you really need to "brag" about your oil lamp here?
@@NikaTark It describes for other builders how to build their own.
Sir, that is nice.i'll try build one. you inspire me.
AW this is so cute and functional. That'll be a little winter project for a birhday present. I love sound of the engine, it's a real little motor as it should be, hehehe :o)
The best one in TH-cam
I like it! Control is the only thing missing with my putt putt boats.I’ve made several videos and being able to RC them would be cool!
I love this guy! he is a genius -.-
words coolest boat possible
It's just so wonderful. I absolutely love it 👍👍👍👍👍
Thanks !
Nice... Simple but very effective 👍👏👌
Thanks
it would be very cool to see a clear window to let the candle light through. it would make it look like a real ship at night
Very well done! The RC control adds a whole new level to these silly things.
Thanks :o)
C'est un bateau versatile, multi-usage, pêche, promenade, remorquage, ski nautique. Parfaitement adapté à la crise :o)
Amitiés de France
You just made my day...thanks a lot!!!
Hey man thats so cool i have a pop pop boat and i always wanted to do that too!!!This is a very cool way to make a rc boat without charging any battery to drive it!!!
That is superb!
Excelente proyecto, me motiva a construir algo similar, gracias!!
This is not a pop pop boat. It should be called a BWAAAAAAM BWAAAAAAAAAAAAAAAAM boat. What a machineeee
Merveilleux !!👍👍😉😉
Merci !
Very nice work! Cool little boat!
Awesome little boat might have a go build one myself :-)
Bravo dude!
Merci :)
Very nice
Beau boulot ! Very Good work Thanks for explanations :)
Merci pour le comentaire
Probablement parce que vous avez une flotte entière d'entre eux.
Salutations de Pologne.
Amazing work.
Thanks
Excellent
i've watched this 100 times only for seeing the fisg part xDDD
Wow, Awesome!
And that sound!!!
Respect, dude!
¡Excelente! Muy bien hecho.
Good idea....👍👍👍
Finally a use for my toy grade heli! :D
Courage. You will get there
The running time is depending of the oil quantity in the burner. The boat of the video have a burner capacity of around 1/4 cc and works about 5 minutes.
Watched your previous video, saw the boat getting stuck in the plants in your lily pool. Now found this one. Fantastic job Man. Can you please make a video of this RC one in that pool. Thanx
an inspiration to over engineering!
Thankyou again,I shall be building an r.c. version for my nephew,so that he can scare his dad`s (my brothers) prize koi carp.
เยี่ยมไปเลย ฝรั่งก็สุดยอด GOOD
That is.. So.. Cute..
Yes you can use epoxy. The boiler is the only one problem because it should be resistant at more than 120 °C. Iron is easy to sold with plumbing solder. This soldering is heat resistant but not works with aluminium. Of course, boiler should be perfectly sealed. If you find only aluminium can, you can use the Araldite glue with metal powder included for the boiler. This glue is more heating resistant than others For the rest of the boat, aluminium and epoxy are well
nice work :)
hours and hours of entertainment :P
Super video, faut que j en fasse un pour mon neveu. pourquoi ne mets tu pas du nitromethane dans le "boiller" pour aller plus vite ?
Dopage interdit ;o)
yes I would love to see it
Good thing I have a wrecked heli just sitting in my basement!
Have a look on the toys stores. You can either find the same on Ebay. Mine is a "Nine Eagles solo pro". But another brand can do the same.
cute boat. i love it :)
And it could be like a power control. Great !
Nice!
NICE!
I don"t use candle but oliva oil. So it depend of the amount of oil in the burner. Say about 15 minutes. For the radio gear, the electric consommation depend of the sollicitation of the rudder. Many hours maybe.
You can find the brass pipe in stores for radio control models or in hardware stores. If you can not find there, try to find brake car pipe.
Brilliant!
So cute
Merci pour la réponse :)
Merci.
Est-ce un bateau de pêche ou un remorqueur?
Yes. I speak french very well ;o)
Mais je préfère commenter le plus souvent mes vidéos en anglais pour que le maximum de gens comprennent.
why did Iike this so much
so good!
nice, why the light come on and off constantly on the bathroom?
Excellent ^^
woow amazing! when u will start selling!? :D
awesome
It is very Q....
I like it.
C'est geniale, mais dans l'eau ouvert si la combustion termine comme faire pour recuperer le pop.pop boat?
Awesome
could you make a tutorial how to build the steering mechanism with the servos and stuff?
omg! lol!! so pretty :3
awesome !
It runs as long there is oliva oil in the burner. So the running time depend of the capacity of the burner. The boat in the video runs about 5 minutes
Yes, it could make a nice video.
I already did a test in a large pond. But I chose a bad day. There was little wind and the boat was upset. It is very light is very sensitive. I'll try again in the morning early, , before the wind picks up.
you should make something to move the candle closer and farther from the boiler
How do you build the RC part bec cause I have got a dead small helicopter and I wanted to do the same
woow ........
u should make a rc pop pop boat ship with /two motorss
Je n'ai pas démantelé mon hélico. Comme j'explique dans le préambule, la carte ne fonctionnait plus que sur une seule voie. J'ai du la changer. Le pop-pop m'a permis de recycler la carte foireuse. Merci pour vos commentaires et bonne construction de pop-pop boat
Do you need the pipes
Could you make a full size pop pop boat ?
Good idea !
This is full size
can you make a longer tutorial for build this steamboat???
Thanks! :-)
How many time that can work (in water)?
:o)
HOW MUCH on EBAY? hahaha
i want five of them
:o))
?
I like that toy