Be VERY careful, when putting on the cross bar shown at 1:53 there is a wire running down that pole you have to make sure that the screw does not cut through the wire when attaching the cross bar. That is what happened to us, we screwed right through the wire and totally broke it in half. You could turn the switch on and it would glow red but the screen was dead as it could be. My best thought would be to gently pull the wire from the top of the pole snug to the side to give room for the screw to go in without hitting the wire. Or if you can get your finger through the hole and feel for the wire and maybe get a little piece of tape through the hole to tape it to the side. Ancheer customer service contacted though Amazon was very helpful!!!
Very cool. Dont forget about the security lock. Its the red cord with the magnet. If you pull it off the treadmill should stop. Its a great security feature.
This assembly is not as easy as he is showing. 1)The center pole will not connect to the other side. One side snapped in, but the other side is not snapping in . 2) Plus, I flipped it to its side (not recommended) to have gravity assist me with the middle pole and now my incline is stuck (like B81Matt). Need someone from Ancheer to respond to all of these comments requesting help. Please help.
My personal experience: How I resolved the treadmill stuck in incline position. I picked it up from the back and tapped the hydraulic pole underneath and it slowly came down flat to the floor.
Be VERY careful, when putting on the cross bar shown at 1:53 there is a wire running down that pole you have to make sure that the screw does not cut through the wire when attaching the cross bar. That is what happened to us, we screwed right through the wire and totally broke it in half. You could turn the switch on and it would glow red but the screen was dead as it could be. My best thought would be to gently pull the wire from the top of the pole snug to the side to give room for the screw to go in without hitting the wire. Or if you can get your finger through the hole and feel for the wire and maybe get a little piece of tape through the hole to tape it to the side. Ancheer customer service contacted though Amazon was very helpful!!!
Very cool. Dont forget about the security lock. Its the red cord with the magnet. If you pull it off the treadmill should stop. Its a great security feature.
I need help! Mine shows an err code and wont let me set it up
Did you ever figure it out? I have the same problem 😭
I have two screws and washers left over 😮
I'm having trouble pairing remote help!!
Can you help with finding an English language manual and the Q app comes up in an Asian language
Great to assemble. However the speaker dock on my treadmill is not working no sound when connected to music device.
Which model is this treadmill? I have the 3.25 horsepower one.
This assembly is not as easy as he is showing. 1)The center pole will not connect to the other side. One side snapped in, but the other side is not snapping in . 2) Plus, I flipped it to its side (not recommended) to have gravity assist me with the middle pole and now my incline is stuck (like B81Matt). Need someone from Ancheer to respond to all of these comments requesting help. Please help.
My personal experience: How I resolved the treadmill stuck in incline position. I picked it up from the back and tapped the hydraulic pole underneath and it slowly came down flat to the floor.
I just recived mine and it is stuck in an incline how do I release the incline lock
Thank you.. This helped me set up mine easily.
Wow so cool!!!