Ordered my kit for my 2004 soft tail standard suppose to be here tomorrow getting bike apart now like watching this guy work very helpful keep my fingers crossed it goes well
This man did my brother Jon's conversion. I highly recommend this company and their products. I would share a photo, but I am not as smart as my phone. Every one we met at Frankenstein Trikes are friendly and very mechanical. I am a retired millwright/welder. These folks build a quality trike.
Weather you like trikes or not this kit is amazing just installed my 3rd on on my uncle's bike did another 2 on my Fathers way back and another uncle and they are amazing bolts on super clean and they are bullet proof ride great and affordable compared to other kits or factory trikes. I would recommend these kits to anyone
Someday my twin brother, my best friend, my cousins and I are going to do a Frankenstein trike trip to either Florida or Vegas. Got to look at the best kit
@Scott Ewell Glad to hear your build went smoothly! Sucks about the t-shirt though, give us a call and we'll get you taken care of! Our number is (913) 352-6788 and we're open Mon-Fri, 8 am - 5 pm. Our you can send an email to info@frankensteintrikes.com
As for using an impact , there are situations where it's not a good thing, as they can over torque. Better to go a little slower and use elbow grease instead. Good video 😎
Awesome, thank you! I think a lot of people would appreciate one of these install videos for a Sportster. I'm sure it's a popular choice for your kit - I have a 2010 Forty-Eight and a video would be VERY helpful.
Thanks! We also designed our rear-end to be installed by anyone with some mechanical knowledge, so it's not too difficult. You can take a look at our installation instructions on our website, www.frankensteintrikes.com
Fine job!!!! It would be nice to get rid of the fender and have some kind of a molded double fender system and perhaps maybe a little trunk in the back
An L shaped backrest box molded to fit right on top of the fender is the only way to go ..it's a belt driven mobile so you gotta protect that belt drive with all the high fashion u can get .. lol
I'm thinking about getting one of these for my Sportster but I see how you're doing this with a old antiquated way of using a ratchet when you should be using some kind of battery powered device to get your work done much faster or even that air ratchet would be faster than by hand 👌
Thanks! We wish we were in Cali! We're actually located in southeast Kansas, about an hour south of Kansas City. However, we have dealers all over the world and also ship directly to our customers.
I know this is 4yrs old but two questions. 1st, do you offer the black axle? 2nd, what is the exact rim and tire size? I am planning my build over the winter and want to get everything soon. Thanks
Looks solid, well made, and easy to install. I saw a blurb on the website about rake/trail "suggested triple trees." I have a stock frame '79 Electra Glide. What extra costs might I need to consider to meet the suggestion? P.S. I don't need schooled on rake/trail, I'm just figuring out what I need to convert my beast. Or should I call? Thanks.
We recommend the raked triple tree for every kit we sell. Without it, you might experience a low-speed wobble or heavy steering. Our kit lowers the rear-end of the bike by around 1/2" so the raked triple tree corrects the rake/trail to make it ride more like stock. We definitely suggest giving us a call for details. Our number is 9133526788 and we're open Mon-Fri, 8 am - 5 pm CST.
@@frankensteintrikesusa That sounds like a great approach. Thanks, I'll be talking to you by the Fall when the weather cooperates a little better. Thanks again.
"Shulada de conversión de moto. Requerirá de permiso especial? Nueva tarjeta de circulación? cuanto cuesta una conversión de estas? Excelente video, gracias por compartir...
Our fenders are gel-coat fiberglass and are very durable, especially to the elements. They do come raw, so they have to be sanded and have primer applied before painting.
Buddy of mine had one . lm pretty sure he liked it just fine. Biker went by Blue. Hes from Kc. And tode blue Frankenstein rig. I believe he said it had like a performance rearend in it?
I lost my left leg below the knee last year from a motorcycle accident, I didn't feel to safe or comfortable riding it especially going slow or stopping, last Monday my prosthetic slipped off the peg and hit the ground and went flying, I suffered a bad spiral fracture and had surgery Tuesday , I want to keep my face in the wind and I want to do this Frankenstein kit to keep me alive, I've got a 08 soft tail custom, I would love to talk to someone about axel sizes, the rake, fenders, etc
@@patrickchristensen7937 Sorry to hear about that. Our kit would definitely work for you, but it would probably be best if you went to a local shop so they can help you with your specific needs, like hand controls and a strap for your prosthetic. But here's a link to our kit for the Softail: frankensteintrikes.com/trike_kits_softail_page.html If you have any questions, give us a call at (913) 352-6788. We're open Mon-Fri, 8 am - 5 pm CST.
We highly recommend using a torque wrench and torqueing all of the bolts to the specifications in the installation manual that came with your trike kit. We also suggest using a lift or something similar to protect the rear-end and to make installation easier. You can find installation instructions on our website, www.frankensteintrikes.com or give us a call if you have any questions. Our number is (913) 352-6788 and we're open Mon-Fri, 8 am - 5 pm CDT.
Hi Taj, check out our website www.frankensteintrikes.com for pricing of our trike kits. You can also find a list of our dealers on our website, for someone who is close to you that can do the installation. Or, if you have a bike shop that you trust, they can usually do the installation. We also do installations in-house, the rear end installation is $540, to install the triple trees is $90/hr (usually takes 3-5 hours, depending on the bike). Painting fenders is $450 for one color, $550 for FL fenders, and $100 for additional colors or pinstriping. Paint can take anywhere from 1-2 weeks, depending on how busy our painter is. If you have any questions, give us a call at (913)352-6788. We're open Mon-Fri, 8 am - 5 pm CST.
I have a 2004 night train and I have MS so my balance is going to hell but I want it to lean too do you do a trike kit with independent suspension I've been riding my Yamaha 1600 roadstar with a sidecar and it doesn't lean at all
Our trike kit does not have independent suspension, it is a straight-axle trike kit. Visit www.frankensteintrikes.com for more info and let us know if you have any questions.
About a year and a half ago I saw something that still has me scratching my head. I met a line of bikes in a long sweeping curve, the first 3 were 2 wheelers leaning into the curve the 3rd bike was a trike also leaning into the curve, the next 2 bikes were also trikes straight up, turning the front wheel to make the curve. So my question is how did someone make an articulated trike, how does it work, and how much does it cost?I'm usually pretty good At figuring mechanical things out but that has me stumped
It depends. We've had some customers get the trike kit in the morning and be riding by evening, but most people like to take their time and stretch it out over a weekend. We do recommend you have someone help you with lifting the kit.
The reverse that we have used is a mechanical reverse kit that goes on the right side of the transmission. The reverse works on 1988 and big twins. There is no reverse available for the sportster, v-rod or the Harley street. A bike with our kit installed is easy to push around. Our kit adds about 120 to 150 pounds to the weight of the bike. Other kits add well over 400 pounds to the weight of the bike. The reverse cost $1099.00
We make trike kits mostly for Harleys, but a few Yamahas and Kawasakis. Visit www.frankensteintrikes.com for more info or give us a call at (913) 352-6788. We're open Mon-Fri, 8 am - 5 pm CST.
Great video And very informative as well I follow you on other social media great work on all the Frankenstein Trikes you guys build 🤘🏻🤘🏻🤘🏻
@Jonathan Korns Thank you very much! We appreciate the support!
@@frankensteintrikesusa m
I’m
instablaster...
@@ronbusbea7992
,
R
Motorcycle
Ordered my kit for my 2004 soft tail standard suppose to be here tomorrow getting bike apart now like watching this guy work very helpful keep my fingers crossed it goes well
This mechanic knows his stuff!!! Highly skilled and fast.. Frankenstein Trike kits are the only way to go....Ride safe to all....
This man did my brother Jon's conversion. I highly recommend this company and their products. I would share a photo, but I am not as smart as my phone. Every one we met at Frankenstein Trikes are friendly and very mechanical. I am a retired millwright/welder. These folks build a quality trike.
Thanks for the kind word, Stan!
They impressed me, I thought about.just trading for a Freewheeler, but after thinking it over,,,,🤔🤔?? They get my business 😃👍
All my respect. Gotta love a specialist who know his job!!!!
Weather you like trikes or not this kit is amazing just installed my 3rd on on my uncle's bike did another 2 on my Fathers way back and another uncle and they are amazing bolts on super clean and they are bullet proof ride great and affordable compared to other kits or factory trikes. I would recommend these kits to anyone
Thank you for your kind words!
Joe is awesome! Wrenches and ratchets everything. Great old school
technique, no power wrenches here boys!
Very helpful. I have viewed this several times to build confidence and recall.
He's really good. That kit looks very well engineered.
Someday my twin brother, my best friend, my cousins and I are going to do a Frankenstein trike trip to either Florida or Vegas. Got to look at the best kit
The instructions for my kit was dead nuts on ! Not one problem none ! Great job fellows! Cept someone took my tee shirt !
@Scott Ewell Glad to hear your build went smoothly! Sucks about the t-shirt though, give us a call and we'll get you taken care of! Our number is (913) 352-6788 and we're open Mon-Fri, 8 am - 5 pm. Our you can send an email to info@frankensteintrikes.com
@@frankensteintrikesusa I am
@@frankensteintrikesusa WHAT ? You got a Tee shirt ?
@@cookscorner7602 Yes we do, check out our website www.frankensteintrikes.com and click "t-shirts" under the "trike components" tab.
As for using an impact , there are situations where it's not a good thing, as they can over torque. Better to go a little slower and use elbow grease instead. Good video 😎
great job, fantastic project. and the mechanic friend, reminds me of the great actor; Vincent Price
Haha, thanks!
This is on my bucket list.
I hope I have enough time left,...to fill my bucket list.
Love how this guy works. Great Video
Excellent video! I would totally trust this man with my ride!
Thanks! And he's a great mechanic!
Nothing like a great WRENCHING video!
Near beginning I feared it would be "$ bill green" looking .. nope I was wrong ..looks badass .. good vid
Great video!! Now all I need is a motorcycle and the trike kit
Like it better then those training wheels on some I see
Awesome, thank you! I think a lot of people would appreciate one of these install videos for a Sportster. I'm sure it's a popular choice for your kit - I have a 2010 Forty-Eight and a video would be VERY helpful.
Thanks! We'll be doing more videos for different conversions as we do them in-house, so be sure to subscribe to see new videos!
Amigo eres todo un genio de la mecánica lo haces tan fácil y se aprende, de hecho ese es mi sueño hacer un triciclo moto
Felicidades por enseñar.
Dont care for frankensteins much but joe n josh are on point. Lookin good guys. See u around
Have a 1200 sportster with one of these kits name on it.. I've been looking around and these frankensteins are the best.
Awesome, glad to hear it!
You make it look easy. But excellent instructions.
Thanks! We also designed our rear-end to be installed by anyone with some mechanical knowledge, so it's not too difficult. You can take a look at our installation instructions on our website, www.frankensteintrikes.com
Good job frank I like the way you do it
Sombody get this man an impact!
Yes!
Huh" you took the words outta' my mouth 💥
Love the idea. I'm thinking of this for the future if it works for my Indian Chieftain.
Changing belts and rotors is pain in the but once you have that Frankenstein on the bike trike 🔱
Beautifull. Job man great. I learned lots from you ..thanks peace ✌
Just now seeing this video. Thanks for sharing.
I can't hold a heavy bike up anymore.Gonna get a trike kit too stay in the wind.Good job.😎
Leman trikes in PA has an independent rear air bag system so when you lean the opposite side stays on the ground. It’s nice not cheap though
Fine job!!!! It would be nice to get rid of the fender and have some kind of a molded double fender system and perhaps maybe a little trunk in the back
An L shaped backrest box molded to fit right on top of the fender is the only way to go ..it's a belt driven mobile so you gotta protect that belt drive with all the high fashion u can get .. lol
Excellent mechanic knows his stuff nice job 👍
He definitely does!
Great video. Love the built in boot aircon...lol
Awesome video Great work !
I'm thinking about getting one of these for my Sportster but I see how you're doing this with a old antiquated way of using a ratchet when you should be using some kind of battery powered device to get your work done much faster or even that air ratchet would be faster than by hand 👌
that is fkn sick ! best looking trike kit ive seen ! wish you had a kit for a honda phantom !
We don't build any kits for shaft-driven bikes.
If you have any questions, let us know.
Damn that looks f'n sweet, on a softail even. Great job, excellent video. Tell y'all are in Cali somewhere 😎
Thanks! We wish we were in Cali! We're actually located in southeast Kansas, about an hour south of Kansas City. However, we have dealers all over the world and also ship directly to our customers.
Absolutely brilliant love well done and well explained cheers Larrysullivan in London
Ese trike mola tela y cantidad.
Buen trabajo, muchacho!
How come Joe does all the hard work and not frank. Joe needs a raise ,hint hint frank.
do you have kit for fx dyna glide?
I know this is 4yrs old but two questions. 1st, do you offer the black axle? 2nd, what is the exact rim and tire size? I am planning my build over the winter and want to get everything soon. Thanks
Well done joe thanks for the info
when you come up with a kit for shaft drives,,, lemme know
I wish you had a video that showed changing the front end. Just a thought.
Don't stick your finger in a hole to line it up! That's how you lose your finger! Seen it happen!
Looks solid, well made, and easy to install.
I saw a blurb on the website about rake/trail "suggested triple trees." I have a stock frame '79 Electra Glide. What extra costs might I need to consider to meet the suggestion?
P.S. I don't need schooled on rake/trail, I'm just figuring out what I need to convert my beast.
Or should I call? Thanks.
We recommend the raked triple tree for every kit we sell. Without it, you might experience a low-speed wobble or heavy steering. Our kit lowers the rear-end of the bike by around 1/2" so the raked triple tree corrects the rake/trail to make it ride more like stock.
We definitely suggest giving us a call for details. Our number is 9133526788 and we're open Mon-Fri, 8 am - 5 pm CST.
@@frankensteintrikesusa
That sounds like a great approach. Thanks, I'll be talking to you by the Fall when the weather cooperates a little better.
Thanks again.
Dammmm nice looking trike fenders and tire made that bike
Agreed!
Wow,Thatiz Amazing!
Hell yeah love it
"Shulada de conversión de moto. Requerirá de permiso especial? Nueva tarjeta de circulación? cuanto cuesta una conversión de estas? Excelente video, gracias por compartir...
Muito TOP.
Parabéns pelo trabalho.
Abraços brother.
Falando de São Paulo Brasil.
👏👏👏🤘👊🏍🏍🇧🇷🇧🇷🇧🇷
Quanto costa la trasformazione? Grazie buona giornata
What size axle are you installing? Also what is the tire size?
For this trike we used 38" axles and the customer supplied tires that are 315/35/17
I would like to see if you can turn my bike into a trike on video
Looks great! Somebody please get this guy a Milwaukee impact gun! Lol 🍻
Tell me something. What about fenders. Because of rain and inclement weather?
Our fenders are gel-coat fiberglass and are very durable, especially to the elements. They do come raw, so they have to be sanded and have primer applied before painting.
Buddy of mine had one . lm pretty sure he liked it just fine. Biker went by Blue. Hes from Kc. And tode blue Frankenstein rig. I believe he said it had like a performance rearend in it?
👏
Must be old school no power tools 💪
Very nice kit how much and where are you located at 😊
I need one for a 2008 soft tail custom
I lost my left leg below the knee last year from a motorcycle accident, I didn't feel to safe or comfortable riding it especially going slow or stopping, last Monday my prosthetic slipped off the peg and hit the ground and went flying, I suffered a bad spiral fracture and had surgery Tuesday , I want to keep my face in the wind and I want to do this Frankenstein kit to keep me alive, I've got a 08 soft tail custom, I would love to talk to someone about axel sizes, the rake, fenders, etc
@@patrickchristensen7937 Sorry to hear about that. Our kit would definitely work for you, but it would probably be best if you went to a local shop so they can help you with your specific needs, like hand controls and a strap for your prosthetic. But here's a link to our kit for the Softail: frankensteintrikes.com/trike_kits_softail_page.html
If you have any questions, give us a call at (913) 352-6788. We're open Mon-Fri, 8 am - 5 pm CST.
Que buen video ilustrativo para ver el desarme y arme del trike
Nice video
Thanks!
You do Great work...Bravo
Thanks that was bad ass
Nice work keep it Up
Why not finish it with the fenders?
Great video !!
Thanks!
Is a change in the degree of the triple needed? Is this kit available for a 2015 Triumph Scrambler?
Hello My wife's Kit just arrived. Can you tell me if I will need any special tools not in the average household? She has the XG500 Street kit
We highly recommend using a torque wrench and torqueing all of the bolts to the specifications in the installation manual that came with your trike kit. We also suggest using a lift or something similar to protect the rear-end and to make installation easier. You can find installation instructions on our website, www.frankensteintrikes.com or give us a call if you have any questions. Our number is (913) 352-6788 and we're open Mon-Fri, 8 am - 5 pm CDT.
A wise man said.... take pictures or video, if you want to put it back together.
How much is kit and install your work looks nice great job watching frm cols oh.
Hi Taj, check out our website www.frankensteintrikes.com for pricing of our trike kits. You can also find a list of our dealers on our website, for someone who is close to you that can do the installation. Or, if you have a bike shop that you trust, they can usually do the installation.
We also do installations in-house, the rear end installation is $540, to install the triple trees is $90/hr (usually takes 3-5 hours, depending on the bike). Painting fenders is $450 for one color, $550 for FL fenders, and $100 for additional colors or pinstriping.
Paint can take anywhere from 1-2 weeks, depending on how busy our painter is.
If you have any questions, give us a call at (913)352-6788. We're open Mon-Fri, 8 am - 5 pm CST.
What size tire and.rim are these?
I need a kit for a 2007 suzuki boulevard m109r
Great vid
wow so amazing wish he was my best friend 😆
Good work ❤
I have yet to see someone riding around with this modification.
Perfect 👏🏻👏🏻👏🏻👏🏻👏🏻
Why does this mechanic NOT use an air ratchet?
How awesome.how much for 82 xl kit?. badass
Here's our page for an 82 Sportster: frankensteintrikes.com/trike_kits_sportster-1957-1987_page.html
I have a 2004 night train and I have MS so my balance is going to hell but I want it to lean too do you do a trike kit with independent suspension I've been riding my Yamaha 1600 roadstar with a sidecar and it doesn't lean at all
Our trike kit does not have independent suspension, it is a straight-axle trike kit.
Visit www.frankensteintrikes.com for more info and let us know if you have any questions.
Cómo hago para tener esa adactacion para mi moto soy de cali Colombia
About a year and a half ago I saw something that still has me scratching my head. I met a line of bikes in a long sweeping curve, the first 3 were 2 wheelers leaning into the curve the 3rd bike was a trike also leaning into the curve, the next 2 bikes were also trikes straight up, turning the front wheel to make the curve. So my question is how did someone make an articulated trike, how does it work, and how much does it cost?I'm usually pretty good At figuring mechanical things out but that has me stumped
Leaman trikes independent rear suspension
@@charlietaylor6389 thanks I'll have to check them out
💨💨💨♿️ My Dreams 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼🤜🏼🤛🏼😍😍😍😍
best man 😎
Craftsman tools is a good sign
Great video but I am seeing so much time wasted twisting on a ratchet when a battery impact would be so much quicker.
How much is the Frankenstein Trike kit Cost?
It depends on the year and model of the bike you're wanting to convert. Visit www.frankensteintrikes.com for pricing.
About how many hours can it take to finish one
It depends. We've had some customers get the trike kit in the morning and be riding by evening, but most people like to take their time and stretch it out over a weekend. We do recommend you have someone help you with lifting the kit.
What about "reverse" ?
The reverse that we have used is a mechanical reverse kit that goes on the right side of the transmission.
The reverse works on 1988 and big twins.
There is no reverse available for the sportster, v-rod or the Harley street.
A bike with our kit installed is easy to push around.
Our kit adds about 120 to 150 pounds to the weight of the bike.
Other kits add well over 400 pounds to the weight of the bike.
The reverse cost $1099.00
TRICK TO put that 1\4 inch washer, is to put a short piece of tape on th washer and lower it down into the gap.
THAT'S COOL
Frankenstein trikes can you put that trike kit on a Honda 650 and how much is it going to convert it to a tricycle to a trike
If it's belt or chain drive, one of our rear ends should work. Give us a call for more details.
Piece of cake. .Lock tight. .Crusine to Stugis
Seems hard to change the belt , is it ok to use a chain instead of the belt ?
Our kit is designed to use whatever comes stock on the bike.
Man are those kits for harleys or do you make them for the metrics ?
We make trike kits mostly for Harleys, but a few Yamahas and Kawasakis. Visit www.frankensteintrikes.com for more info or give us a call at (913) 352-6788. We're open Mon-Fri, 8 am - 5 pm CST.