Hey man, this video saved me a lot of butt pain when I took my 2014 Brute Force 750 out on the trails for the first time yesterday. I was skipping it across a small pond and tearing up the mud pretty good when it happened. I thought my memorial day weekend riding was over, but your video put it back on the trails. thank you for doing this.
Oke you do have the RIGHT answer. You know what? Bought my quad new but did not had the loose grey dummy conector. Did contact my dealer and they shipped it to me. Don't know if this is optional but I did not had one. FINALY After half a year the light is off. Thank you my friend. Am SUPER glad. And strange that you have the only right answer on the whole internet. Believe me I've been searching. Thx 💪🏼
Subbed to help out the channel! Thanks man. Worked on our 2016 750 Brute, watched at least 5 videos before yours and none worked except yours! Now off to do the front axle seal and we’ll be riding this one again! 🤙🏼
Dirt YMaxx finally after 6 months I thought you have the answer. But believe me, I have other connectors. No gray. All black and 1 white dum,y with 3 steel points not 4 like yours and just 2 cables. My dealer also doesn't have the answer. Frustrating. I just keep driving with the stupid red CVT light on. 👹
I just went to do this process on my 2014 BF750 EPS while sitting at the trailhead... you do not need to disconnect the 2 pin connector near the CVT cover in order to reset the CVT light (at least when it is continuously on for the 110 hour maintenance mark). I used the dummy plug under the seat and connected it to the appropriate ends of the 4 pin connectors, turned on the atv for 10 seconds or so, turned it off, then reconnected the four pins and my light was reset. Don't mess with that 2-pin unless you have to!
hello. i hv problem with my bf 750 2015. check engine light is on and i cant start engine. any suggestion ? i was at whole day trip a lot of mud. i back to home normally. today when i wanted to wash it i couldnt to start engine and that light..
This video is exactly how you fix the CVT light issue. Job well done to the video maker! 💯 Not sure how the Author of this video learned this method, but the first time my CVT light went out on my 2015 BF, This super knowledgeable guy ( John Carlton ) helped me out. Look him up for any answers you may need with your Brute. He is a great guy and knows his stuff on these machines! He doesn’t mind helping anyone out in our Brute Force community. You should be able to find him on any Brute Force groups. 🤙
hey bud my 2015 brute all the sudden doesn't want to start and idle unless you hit the throttle .. but seems to run fine under wot .. not sure where to begin
Hey man, this video saved me a lot of butt pain when I took my 2014 Brute Force 750 out on the trails for the first time yesterday. I was skipping it across a small pond and tearing up the mud pretty good when it happened. I thought my memorial day weekend riding was over, but your video put it back on the trails. thank you for doing this.
Instablaster
This was is the only video out of 100s that worked my lights been on for like a month
🙏🙏
Oke you do have the RIGHT answer. You know what? Bought my quad new but did not had the loose grey dummy conector. Did contact my dealer and they shipped it to me. Don't know if this is optional but I did not had one. FINALY After half a year the light is off. Thank you my friend. Am SUPER glad. And strange that you have the only right answer on the whole internet. Believe me I've been searching. Thx 💪🏼
Same here. I tried a bunch of crap before I found his video.
Thank you! Its 5 hours drive round trip you just saved me! And about $100 on fees and gas!
Thanks man. Finally got mine reset.
Thanks man,my CVT light came on and i thougt it was a big issue,thanks for sharing,it helped me out !
this video helped a lot the other videos were to long and didn’t help a bit thanks a lot
Thank you so much, I have a 2014, this procedure worked perfectly the first time.
Thanks man second time saving my day
THANKS man you safe my weekend with friend and family,,,, we camping out in the woods when the cvt light show up
This video was great thanks a lot thanks for all ur help
Subbed to help out the channel! Thanks man. Worked on our 2016 750 Brute, watched at least 5 videos before yours and none worked except yours! Now off to do the front axle seal and we’ll be riding this one again! 🤙🏼
Wow thanks so much for this vid. Man my plugs were on so tight I had to get robo grios to get then off but all on all this fixed the issue!
Awesome!! Worked perfectly. Thank you for the video.
Thanks man you helped a lot !
Worked great! Thank you!
Thank you so much you saved me 🤟🤟🤟🤟
Awesome,worked,thank you !
Worked for me. Thanks for the help.
Good video. Thank you.
Thanks brotha worked good.
Thanks for help bud got a 2020 and it came on two thanks
Ray to Great Sansay. It all works, thanksm dude))
Great vid
Thanks for the info
Like a charm! Thanks!
you are awesome
Dirt YMaxx finally after 6 months I thought you have the answer. But believe me, I have other connectors. No gray. All black and 1 white dum,y with 3 steel points not 4 like yours and just 2 cables. My dealer also doesn't have the answer. Frustrating. I just keep driving with the stupid red CVT light on. 👹
Thank you sir
thank you
I just went to do this process on my 2014 BF750 EPS while sitting at the trailhead... you do not need to disconnect the 2 pin connector near the CVT cover in order to reset the CVT light (at least when it is continuously on for the 110 hour maintenance mark). I used the dummy plug under the seat and connected it to the appropriate ends of the 4 pin connectors, turned on the atv for 10 seconds or so, turned it off, then reconnected the four pins and my light was reset. Don't mess with that 2-pin unless you have to!
hello. i hv problem with my bf 750 2015. check engine light is on and i cant start engine. any suggestion ? i was at whole day trip a lot of mud. i back to home normally. today when i wanted to wash it i couldnt to start engine and that light..
What about the eps light mine stays on all the time
BTW, how did you figure that out? Thanks again.
This video is exactly how you fix the CVT light issue.
Job well done to the video maker! 💯
Not sure how the Author of this video learned this method, but the first time my CVT light went out on my 2015 BF, This super knowledgeable guy
( John Carlton )
helped me out.
Look him up for any answers you may need with your Brute.
He is a great guy and knows his stuff on these machines!
He doesn’t mind helping anyone out in our Brute Force community.
You should be able to find him on any Brute Force groups.
🤙
Does anyone here know where I can buy the “dummy connector” .... I don’t have mine under my seat
hey bud my 2015 brute all the sudden doesn't want to start and idle unless you hit the throttle .. but seems to run fine under wot .. not sure where to begin
Start by changing plugs, my 2016 did that within the first year til I did