I have the very same machine. Not yet used. Please explain the priming and the setting of the black knob. Turned right for priming ? Turned down for painting ??? Thanks
I'm no expert but in my practical experience with this sprayer, turning the black knob downward was mainly for pressure relief, meaning that at the end of a spray you don't leave the hose pressurised, so you turn the black knob down to release that pressure. I found that this unit primes the paint through the line itself when the knob is turned to the left which is its normal spray position.... there is no specific "priming knob". I placed the suction feed into the paint that I thinned out by adding up to 10% water, and it simply primed. Another thing one can do to "prime" the line, is simply place the suction feed into a bucket of water (provided one is using a water based paint), turn on the spray handle and this will easily suck out the water into the line, once water sprays out place the suction into the paint you want to use, and spray into an empty bucket until your paint product comes out and then you're good to go. Hope that helps! Maybe I should do a video on this whole function and how to clean it, as I didn't cover that in my review video.
@@jelreviews Many thanks, very kind of you, l appreciate. Yes please do make other explanatory videos. I had another airless spray painter, had a bad experience, and sent it back-the miracles of mail ordering!- hope this will perform better, what is the yellow joint you applied? Teflon? Brand please. Yes the former leaked a lot.
good bit of kit, just doing my roof with mine. Cleaning it I got a bucket of warm soapy water and ran it through the lot, and then I opened the pressure valve and it washed that through too. Last was taking the gun apart and cleaning the nozzle, so far I am on my fourth 20 litre drum of paint with no problems.@@bwwb5125
Good on ya mate! One of the first videos I ever made was on one of these that I found and fixed from the dump. That was a couple of years ago. Been sitting idle ever since. I had a major house fire a few months back and now I'm about to use it for the first time. Your video really helped and inspired me a lot. I'll definitely video my first attempt as well. Cheers for putting this up bud👍
good insightful demo. The noise it makes is unexpected but the result looks good enough and the wide fan on the spray tip can make short work of big areas but it should be adjustable to concentrate the paint delivery. It's a capable looking unit.
got one of these , had it for 2 years now , replaced the hose and gun with a graco, poor hose and gun for the vevor , little bit of oil before use and still going strong using 3 times a week all day
Nice review , A small tip for the leaking hose . I always sand down flat the part of the pipe where it contacts the rubber seal. 90 percent of the time these have a sharp end that created in manufacturing and will cut into the rubber seal and damage it, witch will then leak ...
Main error I saw is that you change the angle as you spray. Best to keep the sprayer horizontal, moving it up and down without tilting. You do that the top but need to do squats at the bottom (great exercise). Ditto when spraying side-side. I bought a Chinese airless "PTJ-HD2100 Plunger Sprayer" for $128 on Temu. Similar but simpler, with no pressure gage (nor port for one) but appears rugged under the plastic covers. Manual doesn't mention adjusting pressure, but has a 1/2 turn screw on the cut-off switch mount. First pass gave excessive flow w/ Kilz Premium 3 Primer, even with smaller tips than spec (17 to 21 mil). I tried both 515 tip (15 mil) which shipped with it and smaller 211 tip (cheap Chinese set), but the paint flowed so fast that even a quick single pass left it too thick (even puddled), so had to cleanup with a foam brush. Smallest wire I had to test the orifices is 20 mil, which didn't pass so the orifices at least aren't that large. When the Kilz ran out, I used leftover S-W Xtreme Bond Primer which sprayed much better though still a bit high-flow, but likely because I had thinned it ~15% for previous use in an HVLP sprayer. This was ~60 F in a garage on cabinet doors horizontal. Hope next pass w/ pressure set to min and unthinned S-W primer is better. I could buy a Graco nozzle and guard, but $90 and likely not the issue. Perhaps the Kilz primer isn't good for airless spray. So far, just primer mess, which I can sand flat.
Merci beaucoup j ai acheté la même machine , je viens de finir le montage et faire teste avec de l' eau 👍 Demain je vais peindre en extérieur un hangar en tôle , 320m2 🤷🏻 , peinture a l huile 🤞🤞 , j espere que tout ira bien pour le nettoyage également Merci encore pour le tutoriel 🙏🏻 retour 😍 , FANTASTIQUE, j ai peint 70m2 de toiture en tôle en 1h00 , autant de temps a nettoyer 🤦🏻( peinture glycero ) Mon pot de 12L rendement du fabricant 180m2 , j ai réalisé uniquement 70m2, peut être trop de pression 🤷🏻 Si la machine se désamorce tourner la manette noir 10 secondes et remettre en position initiale 👍 ( idem pour faire le nettoyage au white spirit) Seul problème rencontré le blocage de la poignée est peint couleur aluminium mais est juste du plastique et cassé, aucune importance pas d utilité ( si besoin rajouter un serflex sur la poignée) Acheté sur Aliexpress, provenance Espagne livraison 5 jours pour 157€ 🤩🤩 Je suis ravis de mon investissement 😋 Thank you very much I bought the same machine, I just finished assembly and tested it with water 👍 Tomorrow I'm going to paint a sheet metal shed outside, 320m2 🤷🏻, oil paint 🤞🤞, I hope everything goes well for the cleaning too Thanks again for the tutorial 🙏🏻 return 😍, FANTASTIC, I painted 70m2 of sheet metal roof in 1 hour, the same amount of time to clean 🤦🏻(glycero paint) My 12L pot yield from the manufacturer 180m2, I only made 70m2, maybe too much pressure 🤷🏻 If the machine defuses, turn the black lever for 10 seconds and return to initial position 👍 (same for cleaning with white spirit) The only problem encountered is the locking of the handle is painted aluminum color but is just plastic and broken, no problem, no use (if necessary add a serflex on the handle) Purchased on Aliexpress, from Spain, delivery 5 days for €157 🤩🤩 I am delighted with my investment 😋
Plumbing thread tape has no use on presurised equipment like this. Try to tighthen the bolts a bit more or in the case shown on the video add another washer or use thicker one.
Great Video, I have been looking at buying this unit as I have around 90 meters of fence to paint, and I sure aint doing it with a brush. I notice with the unit, the instruction manual is just about useless, so your vid was a great help. Could you please do a complete video on cleaning, and how to store the unit long term, say if you didn't use it for a year or more. I also notice that airless paint guns have a filter in the handle, does this unit have that, and how do you clean or replace it. Many Thanks👍
You called it an air hose. It isn't it's fluid. Great video all the same. I would love a Graco or similar but far too expensive. These are basically pressure washers for paint. Will this cope with industrial epoxies I wonder?
I'm no expert but I believe that would come down to the type of nozzle being used. This machine is capable of pushing paint just like any other airless sprayer, so I would suspect a larger aperture on the nozzle would be key for higher viscosity paints. In any instance, I'd be researching that aspect on how other sprayers achieve flow for such paints.
Have you tried bigger nozzles, like the 523 or even 625? I have a hard time trusting the 2,2 L/min output, so any experiences with bigger nozzles are highly appreciated. Thanks very much for the video!
FYI that extension should not have teflon tape on it. Sometimes you need a thicker white washer or 2 of the ones you have there. no tape. this will cause spitting.
Hey Mate, was just looking at getting one of these. The pdf manual doesnt have much information. Does the gun have a filter element in the handle? Thanks for the vid 😎
Yes it does ... Just unscrew handle part like any other spray gun handle and the long filter comes out for easy cleaning. I probs should do a video on this and how to clean it.
Thanks! No problems at all, but the important thing is to clean it once done painting. I should have covered this in my video but I forgot. It took me about 5-7 minutes to clean it properly from the water-based paint in the line and then it's good to go whenever I need it next. Cleaning is simply running clean water through it until the paint is gone.... clean out the nozzle tip, and the I also took out the filter that is in the spray handle, ensured that was washed clean, and that's it. I haven't used oil-based paint through this, but it would be the same process, just use turps or thinners to clean at the end.
If you don’t clean it properly after use will it be ruined? I used for first time today but couldn’t fully understand how to clean it. I fear it full of paint inside and ruined now.
Keep flushing water through it until clear water comes out the line... Then it's clean. Never leave paint inside... It only takes 2-3 minutes to flush out with water, easy.
From memory, I think I decreased the pressure. Nevertheless, it's a trial and error thing, and is probably dependant on the type of nozzle you're using from what I understand.
I just had a Wagner instruction day on spray painting, because I have a ton of painting to do. They said that to cure it, you should first increase the pressure. If that doesn't work, dilute the paint. If that doesn't work either, change the nozzle for one with a smaller diameter, e.g. change a 519 for a 517.
Is it really worth buying!? I've been reading a lot of negative reviews about this type of sprayers, im afraid it will be just a one time use before it brakes
No disrespect, but buy and believe what you want.... I've just shared my experience on video, that's the best I can do with using any product, whether I pay $300 or $3000....if you read enough reviews on any product you'll find pros and cons on all of them. All I care about is getting the job done and the wife being happy😂
I purchased the exact same machine. The unit pumps, but at some point the breaker in the electrical panel kicks out. Without pressure, it pumps without problems. I tried 16 and 20A (230V) outlets. What could be the problem? Thanks
Hello for my first use I can not make it work I first tried it with water when I turn the black button for pressure it goes up to 2500 or 3000 and after it makes no noise and when I use the gun nothing comes out ?
It's no maintenance headache in my view - we are extremely happy with it... and we've placed a special epoxy coating finish on the floor. The whole area feels really clean compared to what we had.
You take that plastic washer out, as it's sitting too far back in the thread, remove the tape and tighten right up it shouldn't leak. If it leaks it's not tight enough. No tape or washer for that part of the fitting.
I have traces of paint drops when I start and finish using the gun.....i see in your first action on the flor you have drops too.....do you resolve that problem???
Personally I don't think you can stop those drops on any airless paint Sprayer. I've owned other models before and same issue. For me it was acceptable but maybe a more expensive nozzle might decrease it a bit? Maybe check online for answers.
You shouldnt turn the prime valve with pressure still in the line, it will fuck your switch extemely quick. Turn off, release pressure in the line by spraying it into the drum, then you can turn prime valve. A machine shouldnt need priming unless you run out of paint and it sucks a bit of air or if it doesnt stop making the whirring noise like its trying to get to the set pressure even tho ur not spraying
Ok dude, your paint machine has a lower pressure than your paint needs. If you look on the wall, you can see two lines on both ends of the spray. This indicates that it has incorrect pressure.😉
Lol, any review is better than none, plus I'm sure your perspective and opinions will differ to mine. At the time, there was no review I could find on this sprayer which is why I did it... Thanks for watching!
@@jelreviews Yours will still be the only one because the Vevor I got is a bit different model. I just finished the editing and will release the video this weekend. Paint all over LOL!!!
I've seen a lot of these on ebay, amazon and was wondering too either these are any good and reliable...In this review it does kinda look ok but the main problem for me is that the sprayer is reviewed by non professional. Someone who has an experiemce with more professional tools (or even some DIY level sprayers like Wagner 250 or Graco Magnum X5) most likely would point out some key differences. And yeah, another issue of course is reliability - how long thus thing can last!?
Nie kupujcie tego sprzętu! Firma Vevor ma gdzieś gwarancje jakiej udziela na ten agregat malarski. Mój sprzęt nie działa! Nie chcą mi uznać gwarancji !
![[HOW TO] Setup Your Airless Paint Sprayer [Get INSPIRED]](http://i.ytimg.com/vi/XxGc9JTHrpo/mqdefault.jpg)
![[HOW TO] Setup Your Airless Paint Sprayer [Get INSPIRED]](/img/tr.png)
I have the very same machine. Not yet used. Please explain the priming and the setting of the black knob. Turned right for priming ? Turned down for painting ??? Thanks
I'm no expert but in my practical experience with this sprayer, turning the black knob downward was mainly for pressure relief, meaning that at the end of a spray you don't leave the hose pressurised, so you turn the black knob down to release that pressure. I found that this unit primes the paint through the line itself when the knob is turned to the left which is its normal spray position.... there is no specific "priming knob". I placed the suction feed into the paint that I thinned out by adding up to 10% water, and it simply primed. Another thing one can do to "prime" the line, is simply place the suction feed into a bucket of water (provided one is using a water based paint), turn on the spray handle and this will easily suck out the water into the line, once water sprays out place the suction into the paint you want to use, and spray into an empty bucket until your paint product comes out and then you're good to go. Hope that helps! Maybe I should do a video on this whole function and how to clean it, as I didn't cover that in my review video.
@@jelreviews Many thanks, very kind of you, l appreciate. Yes please do make other explanatory videos. I had another airless spray painter, had a bad experience, and sent it back-the miracles of mail ordering!- hope this will perform better, what is the yellow joint you applied? Teflon? Brand please. Yes the former leaked a lot.
Thanks was the best I have seen. Yes, please "do a video on this whole function and how to clean it" I would be appreciated @@jelreviews
good bit of kit, just doing my roof with mine. Cleaning it I got a bucket of warm soapy water and ran it through the lot, and then I opened the pressure valve and it washed that through too. Last was taking the gun apart and cleaning the nozzle, so far I am on my fourth 20 litre drum of paint with no problems.@@bwwb5125
Wow what a time saver money well spent.
Top video mate well put together and explained very satisfying watching the walls being sprayed...always good to see the cheapy tools reviewed
Glad you enjoyed it
J'ai la même et c'est parfait,a conseillé
Good on ya mate! One of the first videos I ever made was on one of these that I found and fixed from the dump. That was a couple of years ago. Been sitting idle ever since.
I had a major house fire a few months back and now I'm about to use it for the first time. Your video really helped and inspired me a lot. I'll definitely video my first attempt as well. Cheers for putting this up bud👍
No worries, glad you found it helpful 👍
good insightful demo. The noise it makes is unexpected but the result looks good enough and the wide fan on the spray tip can make short work of big areas but it should be adjustable to concentrate the paint delivery. It's a capable looking unit.
Thank you for the video. I bought myself the Airless Sprayer. Will use this for the living room next week.
With your video, I have a head start 😊
got one of these , had it for 2 years now , replaced the hose and gun with a graco, poor hose and gun for the vevor , little bit of oil before use and still going strong using 3 times a week all day
So commercial hose will go on this?
I'd like to use lp fine finish tips for joinery work, would I be able to set up this machine for that?
Thanks
Where to put the oil?
May I ask what I should search for, for the replacement hose and g*n, also May I ask where you put oil please?
Thank you for sharing. I had no idea about this Vevor Airless sprayer. I am convinced.
Great demo mate, It does look like a great sprayer for the money.
Thanks, for getting this job done, bang for buck it was great.
Noice!!! Im buying one now. How easy that looked
It's no Wagner Sprayer, but its definitely easy and did exactly what I wanted it to for peanuts.
Nice review , A small tip for the leaking hose .
I always sand down flat the part of the pipe where it contacts the rubber seal.
90 percent of the time these have a sharp end that created in manufacturing and will cut into the rubber seal and damage it, witch will then leak ...
That's a good idea! Thanks :)
Main error I saw is that you change the angle as you spray. Best to keep the sprayer horizontal, moving it up and down without tilting. You do that the top but need to do squats at the bottom (great exercise). Ditto when spraying side-side.
I bought a Chinese airless "PTJ-HD2100 Plunger Sprayer" for $128 on Temu. Similar but simpler, with no pressure gage (nor port for one) but appears rugged under the plastic covers. Manual doesn't mention adjusting pressure, but has a 1/2 turn screw on the cut-off switch mount. First pass gave excessive flow w/ Kilz Premium 3 Primer, even with smaller tips than spec (17 to 21 mil). I tried both 515 tip (15 mil) which shipped with it and smaller 211 tip (cheap Chinese set), but the paint flowed so fast that even a quick single pass left it too thick (even puddled), so had to cleanup with a foam brush. Smallest wire I had to test the orifices is 20 mil, which didn't pass so the orifices at least aren't that large. When the Kilz ran out, I used leftover S-W Xtreme Bond Primer which sprayed much better though still a bit high-flow, but likely because I had thinned it ~15% for previous use in an HVLP sprayer. This was ~60 F in a garage on cabinet doors horizontal. Hope next pass w/ pressure set to min and unthinned S-W primer is better. I could buy a Graco nozzle and guard, but $90 and likely not the issue. Perhaps the Kilz primer isn't good for airless spray. So far, just primer mess, which I can sand flat.
How awesome is this tool, the garage is looking great mate.
Thanks 👍 Getting there that for sure.
Merci beaucoup j ai acheté la même machine , je viens de finir le montage et faire teste avec de l' eau 👍
Demain je vais peindre en extérieur un hangar en tôle , 320m2 🤷🏻 , peinture a l huile 🤞🤞 , j espere que tout ira bien pour le nettoyage également
Merci encore pour le tutoriel 🙏🏻
retour 😍 , FANTASTIQUE, j ai peint 70m2 de toiture en tôle en 1h00 , autant de temps a nettoyer 🤦🏻( peinture glycero )
Mon pot de 12L rendement du fabricant 180m2 , j ai réalisé uniquement 70m2, peut être trop de pression 🤷🏻
Si la machine se désamorce tourner la manette noir 10 secondes et remettre en position initiale 👍 ( idem pour faire le nettoyage au white spirit)
Seul problème rencontré le blocage de la poignée est peint couleur aluminium mais est juste du plastique et cassé, aucune importance pas d utilité ( si besoin rajouter un serflex sur la poignée)
Acheté sur Aliexpress, provenance Espagne livraison 5 jours pour 157€ 🤩🤩
Je suis ravis de mon investissement 😋
Thank you very much I bought the same machine, I just finished assembly and tested it with water 👍
Tomorrow I'm going to paint a sheet metal shed outside, 320m2 🤷🏻, oil paint 🤞🤞, I hope everything goes well for the cleaning too
Thanks again for the tutorial 🙏🏻
return 😍, FANTASTIC, I painted 70m2 of sheet metal roof in 1 hour, the same amount of time to clean 🤦🏻(glycero paint)
My 12L pot yield from the manufacturer 180m2, I only made 70m2, maybe too much pressure 🤷🏻
If the machine defuses, turn the black lever for 10 seconds and return to initial position 👍 (same for cleaning with white spirit)
The only problem encountered is the locking of the handle is painted aluminum color but is just plastic and broken, no problem, no use (if necessary add a serflex on the handle)
Purchased on Aliexpress, from Spain, delivery 5 days for €157 🤩🤩
I am delighted with my investment 😋
I have a machine of this model but it is damaged. Can it be fixed?
Thanks so much great video have bought one for painting my roof etc . I have added plumbing thread tape on all threads to stop leaks ? Is this ok ?
The plumbing tape worked for me. 👌
Plumbing thread tape has no use on presurised equipment like this. Try to tighthen the bolts a bit more or in the case shown on the video add another washer or use thicker one.
Awesome job well done! An excellent video review and application, cheers mate legend 👍
Thanks a lot! Everything I needed to know, I learned thanks to this video!
Glad it was helpful!
Great Video, I have been looking at buying this unit as I have around 90 meters of fence to paint, and I sure aint doing it with a brush. I notice with the unit, the instruction manual is just about useless, so your vid was a great help. Could you please do a complete video on cleaning, and how to store the unit long term, say if you didn't use it for a year or more. I also notice that airless paint guns have a filter in the handle, does this unit have that, and how do you clean or replace it. Many Thanks👍
Glad it helped, Roger. Will try to get around to doing a cleaning video, I think you're right, that would be helpful. Thanks for the suggestion.
Yes the spray gun has a filter inside.
Nice video. Does this sprayer this work ok.
You called it an air hose. It isn't it's fluid. Great video all the same. I would love a Graco or similar but far too expensive. These are basically pressure washers for paint.
Will this cope with industrial epoxies I wonder?
Hi mate, great video. do you know how it would perform with higher viscosity paints. I plan to paint our tiled roof with roofing membrane. thanks
I'm no expert but I believe that would come down to the type of nozzle being used. This machine is capable of pushing paint just like any other airless sprayer, so I would suspect a larger aperture on the nozzle would be key for higher viscosity paints. In any instance, I'd be researching that aspect on how other sprayers achieve flow for such paints.
How much paint does it use. You said 10l to do one coat which is a lot!
Great video! 👍🏽🎉
Glad you liked it!
Hi this is good for using oil- based for wood work
Yes you can, as long as you clean the sprayer properly afterwards with mineral turps.
Have you tried bigger nozzles, like the 523 or even 625? I have a hard time trusting the 2,2 L/min output, so any experiences with bigger nozzles are highly appreciated. Thanks very much for the video!
No, I've only used the standard supplied nozzles which did everything I needed it to. Thanks for watching.
when I work, the electricity goes out for a few seconds, what could it be?
Thanks for your video. Did you dilute the paint?
Thanks, yes, I did 10% water to the water based paint. I was happy with that ratio.
FYI that extension should not have teflon tape on it. Sometimes you need a thicker white washer or 2 of the ones you have there. no tape. this will cause spitting.
Thanks for the tip, much appreciated. Will try it👍👍
Hey Mate, was just looking at getting one of these. The pdf manual doesnt have much information. Does the gun have a filter element in the handle? Thanks for the vid 😎
Yes it does ... Just unscrew handle part like any other spray gun handle and the long filter comes out for easy cleaning. I probs should do a video on this and how to clean it.
@@jelreviews brilliant thanks for replying, just ordered using your code, cheers 👍🍻
Awesome, many thanks!
Great clip mate👍
Nice video!! I’m so glad to find this!! do you have problems to clean the machine before painting???
Thanks! No problems at all, but the important thing is to clean it once done painting. I should have covered this in my video but I forgot. It took me about 5-7 minutes to clean it properly from the water-based paint in the line and then it's good to go whenever I need it next.
Cleaning is simply running clean water through it until the paint is gone.... clean out the nozzle tip, and the I also took out the filter that is in the spray handle, ensured that was washed clean, and that's it. I haven't used oil-based paint through this, but it would be the same process, just use turps or thinners to clean at the end.
If you don’t clean it properly after use will it be ruined? I used for first time today but couldn’t fully understand how to clean it. I fear it full of paint inside and ruined now.
Keep flushing water through it until clear water comes out the line... Then it's clean. Never leave paint inside... It only takes 2-3 minutes to flush out with water, easy.
You need special paint or put woter and good mix
Thanks . A will buy that.
This machine using water base or oil painting base????
Can use both, but I only use water based with this as much easier to clean.
Bonjour, quel lubrifiant faut il mettre svp ?
Use any light oil. I used air Compressor oil... You only need a little amount.
I Am So Surprise With All The Tools And Gadgets You Have, I Have Nothing But A Wheel Barrel. I Hate Painting Also.
I wish I only owned a wheel barrow... I'd have way more room in the shed then 😊
@@jelreviews you got a Shed To?
Well, it's technically a brick addition I built onto my double garage where I do my work and have my man toys (tools). Currently a bg mess lol
Great video, mate, just what I needed! One question: did you in- or decrease the pressure to get rid of the white lines at the start?
From memory, I think I decreased the pressure. Nevertheless, it's a trial and error thing, and is probably dependant on the type of nozzle you're using from what I understand.
I just had a Wagner instruction day on spray painting, because I have a ton of painting to do. They said that to cure it, you should first increase the pressure.
If that doesn't work, dilute the paint. If that doesn't work either, change the nozzle for one with a smaller diameter, e.g. change a 519 for a 517.
Those white lines (also called "fingers") indicate you need more pressure.
Is it really worth buying!? I've been reading a lot of negative reviews about this type of sprayers, im afraid it will be just a one time use before it brakes
No disrespect, but buy and believe what you want.... I've just shared my experience on video, that's the best I can do with using any product, whether I pay $300 or $3000....if you read enough reviews on any product you'll find pros and cons on all of them. All I care about is getting the job done and the wife being happy😂
@@jelreviewswife is main reason for all of us 😂
@@kaovi1978 Ain't that the truth😏
Have you ever used an air less sprayer?
ure happy, your wife happy, im happy watching as well
Hi sir..i hve a questions, what oil u use for a few drop? What type of that sir?
It just needs to be some kind of light oil... I simply used air tool oil. 👍
@@jelreviews tq so much.
I purchased the exact same machine. The unit pumps, but at some point the breaker in the electrical panel kicks out. Without pressure, it pumps without problems. I tried 16 and 20A (230V)
outlets. What could be the problem? Thanks
Hello for my first use I can not make it work I first tried it with water when I turn the black button for pressure it goes up to 2500 or 3000 and after it makes no noise and when I use the gun nothing comes out ?
Llevan una bola de acero que sube cuando succiona pintura,revisa que no está pegada por óxido o pintura
Why not just do the ceiling and floor white? Painting that brick presents a maintenance headache.
It's no maintenance headache in my view - we are extremely happy with it... and we've placed a special epoxy coating finish on the floor. The whole area feels really clean compared to what we had.
Sounds like the motor is turning on/off everytime the pressure drops. Why is it not running all the time ? hmmm those voltage spikes ...
Don't worry this is DC motor no spikes if you give perfect voltage and load carrying socket
All the machines are like this they supposed to stop especially the good machines. They stop when they build pressure only turn on when needed.
No problem. All brands do the same "stop/start". And this is a brushless motor.
this is super good!
You take that plastic washer out, as it's sitting too far back in the thread, remove the tape and tighten right up it shouldn't leak. If it leaks it's not tight enough. No tape or washer for that part of the fitting.
Awesome.... Thanks for the tip. Will give that a whirl 👍👍
@@jelreviewsDid you test it ?
I have traces of paint drops when I start and finish using the gun.....i see in your first action on the flor you have drops too.....do you resolve that problem???
Personally I don't think you can stop those drops on any airless paint Sprayer. I've owned other models before and same issue. For me it was acceptable but maybe a more expensive nozzle might decrease it a bit? Maybe check online for answers.
You can use Clean Shot Valve, will solve the problem. Good presentation.
I think you might have put the safety clip on wrong. it should press the outside..
It's Ok. I also had to use a screw driver. It's pressing the outside like you said.
that's only a good how to shots, it can't get any better and shows really well and clearly what you have and how it works top
Thanks mate... Appreciated👍
Good vid though mate.
You shouldnt turn the prime valve with pressure still in the line, it will fuck your switch extemely quick. Turn off, release pressure in the line by spraying it into the drum, then you can turn prime valve. A machine shouldnt need priming unless you run out of paint and it sucks a bit of air or if it doesnt stop making the whirring noise like its trying to get to the set pressure even tho ur not spraying
that PPE .. Oz style
Solo ad una testa di legno di un americano può venire in mente di colorare dei mattoni in paramano di bianco.. very good
Still have to brush that grout. Black lines with show like dogs balls. Spray is good but won't cover the grout without extra coats.
My wife was happy with the finish.... means I'm happy... means no more painting😂
good share❤
Why does it look like a Titan Sprayer lol
Ok dude, your paint machine has a lower pressure than your paint needs. If you look on the wall, you can see two lines on both ends of the spray. This indicates that it has incorrect pressure.😉
Thanks mate.... appreciate the tip.
How many turns from the end position should the pressure regulator have as a starting point for water based wall paint? Thanks
😂@@carstenlundmadsen3
@@NANIOCH i have the same machine!how can i get rid of that?thanks!
Do you have a initial setup video?. Mine is "peeing". I tried to paint and some paint flood in trigger joint
My review video is gonna suck compared to this one LOL.
Lol, any review is better than none, plus I'm sure your perspective and opinions will differ to mine. At the time, there was no review I could find on this sprayer which is why I did it... Thanks for watching!
@@jelreviews Yours will still be the only one because the Vevor I got is a bit different model. I just finished the editing and will release the video this weekend. Paint all over LOL!!!
👀💯😎👍👍👍👍👍👍👍👍👍👍👍👍
No mask 😅😢😢😢😢😅
nice equipment, complete wrong paint. for these kind of natural mineralic underground use only mineralic paint, no other.
Wear a mask bro. The paint is airborne
Ad amut
I've seen a lot of these on ebay, amazon and was wondering too either these are any good and reliable...In this review it does kinda look ok but the main problem for me is that the sprayer is reviewed by non professional. Someone who has an experiemce with more professional tools (or even some DIY level sprayers like Wagner 250 or Graco Magnum X5) most likely would point out some key differences. And yeah, another issue of course is reliability - how long thus thing can last!?
Nie kupujcie tego sprzętu! Firma Vevor ma gdzieś gwarancje jakiej udziela na ten agregat malarski. Mój sprzęt nie działa! Nie chcą mi uznać gwarancji !
A co było nie tak z tym sprzętem? Sam się skusiłem, niestety co chwila wywala mi bezpieczniki
when I work, the electricity goes out for a few seconds, what could it be?