Hello Mr KSK, Greetings from Australia. I enjoyed this video very much. I am making similar amps using TPA 2.1 amps? I use solid timber for the case. I like a built in power supply. I like your preamp controls remote from the amp board. It would be great to have a full part list with Amazon or other supplier links plus a full circuit diagram showing all the connecting wires. Have you got these things that you could post up for your subscribers? Thanks so much. Cheers.☮️🌈💚🇦🇺
Also made my own similar DIY amplifier, but only 2 channels, I bought a rectangle shaped Bluetooth, FM receiver ,cause i didn't like the oval shape, and the TPA3110 amp is not good on bass , so I used the TDA8932 which is very good in low and high frequencies.. also housed in plastic casing, but not like yours , I just drilled necessary holes on pre-built plastic casing for electronics.. 😊
Super bro, I also actually have the same Idea 💡 to build a 2.1 with those modules. But what is the voltage and current rating you used for power supply???
I have those buck converters, one for step up one for step down both get dead when i tried to step up to 12v and other to step down to 5v from a solar with 10v 0.5A
Hi everyone. Excellent vídeo! I have a question. Can I replace the 3-way ne5532 module with a 4-way one and the tpa3110 2x30w module with the tpa3116d2 2x120w module? thanks!
I think single board of Tpa3116D2 (50w+50w+100w) will do the trick except Bluetooth USB Panel and step down converter. It will be more powerful, I am personally using it. And I think 5:33 you must put a caution to pre-calibrate Step down converter to desired output before connecting wires.
Very nice bro. Looks like Bluetooth usb board has two audio out connectors, which is missing in my board purchased. Pls share the links to buy the boars Thanks.
Hello Mr ksk,greetings from Nigeria can you please let us have the full circle diagram on how you connect all the wires in order to make a successful amplifier as you did so that we your subscriber can really connect it successfully as you did thank you I will be glad if you can post the circuit diagram for we your subscribers thanks
Pls advice. I need Class D Mono amplifier 60watt with only Single MIC input connection, 3 poteniometers. Bluetooth, pen drive not required. where can buy from? available DC supply 12v and 24 volt.
Sir ji .... 3 channel (2.1) amplifier ki connection kaise karenge ? Jab humhare Bluetooth card mein sirf left right 2 hi channel hein to 3 channel ( 2.1) ko input kaha se denge please help me 😥
Bantu jawab mas.. Tone control 2.1 Modul Bluetooth Step down TPA3118 (untuk subwoofer) TPA3110 (untuk satelit) Soket dc Terminal speaker kecil Terminal binding post Soket RCA
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Hello Mr KSK, Greetings from Australia. I enjoyed this video very much. I am making similar amps using TPA 2.1 amps? I use solid timber for the case. I like a built in power supply. I like your preamp controls remote from the amp board. It would be great to have a full part list with Amazon or other supplier links plus a full circuit diagram showing all the connecting wires. Have you got these things that you could post up for your subscribers? Thanks so much. Cheers.☮️🌈💚🇦🇺
Yes, absolutely
Also made my own similar DIY amplifier, but only 2 channels, I bought a rectangle shaped Bluetooth, FM receiver ,cause i didn't like the oval shape, and the TPA3110 amp is not good on bass , so I used the TDA8932 which is very good in low and high frequencies.. also housed in plastic casing, but not like yours , I just drilled necessary holes on pre-built plastic casing for electronics.. 😊
Very cool!
@@kskmakes8054 thanks, but your project is a lot cooler..😊
What about TPA3116D2, any good for bass?
@@sasyedji not good.. maybe you need to have a good tone control to compensate for its poor bass response.
Super bro, I also actually have the same Idea 💡 to build a 2.1 with those modules. But what is the voltage and current rating you used for power supply???
24volt 5amp DC
24volt 5amp DC
Keep up tha good work
Thanks for watching
Good Work ❤️
Thank you! 😊
Using this same amp board can we boost the output......
Очень красиво получилось. И сабвуфер тоже симпатичный.
I have those buck converters, one for step up one for step down both get dead when i tried to step up to 12v and other to step down to 5v from a solar with 10v 0.5A
can you use external amplifier with this ?
Wow super nice 👍
Thank you so much
சூப்பர்யா....அருமை
Bhai Iska sirf Bass dekhna tha kaisa hai,baki stereo to pata tha,mere pass bhi 3118 mono hai,ye pre amp lu ya na for subwoofer
Very good your project❤ awesome 🇧🇷😊👏👏👏👏 subscribed, nice bro
Thanks for the sub!
Is there Subwoofer filter board used to cut off high frequency??
Yes
Very good making clearly bro.
Thank you so much 😀
Where do i get the front piece with the Bluetooth and volume knobs?
Available in Amazon
Hi everyone. Excellent vídeo! I have a question. Can I replace the 3-way ne5532 module with a 4-way one and the tpa3110 2x30w module with the tpa3116d2 2x120w module? thanks!
@kskmakes8054 I need to know if this can be done. Please, help me. Thanks!
Yes
Mast
Thanks 🤗
Good work👍👍👍
Thank you for watch
Ini baru bagus berapa mad hargany
I think single board of Tpa3116D2 (50w+50w+100w) will do the trick except Bluetooth USB Panel and step down converter. It will be more powerful, I am personally using it. And I think 5:33 you must put a caution to pre-calibrate Step down converter to desired output before connecting wires.
Thank you for watching
bahkan ada yang langsung ada bluetoothnya,atau pakai zk tb21
Sangat bagus video anda ❤️👍
👏 bravo from Greece
Thanks for watching
Sir. I liked this fyi project Is this entire kit available online with Amazon India. Power supply unit purchased from where. 🎉 Thanks in anticipation.
total parts available Amazon
Very nice bro. Looks like Bluetooth usb board has two audio out connectors, which is missing in my board purchased. Pls share the links to buy the boars
Thanks.
Ok I will try
I like it🥰🥰🥰
Thanks for watching
also I wondered what material is the cabinet and do you cut with a laser?
Thank you for watching not laser im use knife
@@kskmakes8054 what material you used to make the cabinet...
Kitna wattage ka hain ye amplifire?
120watts
Hello Mr ksk,greetings from Nigeria can you please let us have the full circle diagram on how you connect all the wires in order to make a successful amplifier as you did so that we your subscriber can really connect it successfully as you did thank you I will be glad if you can post the circuit diagram for we your subscribers thanks
Lem apa tuh kuat banget kayaknya
Konse power supply apne use kiya or ketne amp ka use kiya?
24volt 5 amp thanks for watching
Good job...
Thanks
3118 or 3116d2 which is the best and 24 v healthy or risky pls tell me..I have 24 v smps power supply
24 5amp power supply good for 3116d2
@@kskmakes8054 Thanks sir..and one think..woofer value and size...like ohm watt and 6" or 8" for better performance and safe for this board..pls sir 🙏
8 inch woofer 8 ohm
@@kskmakes8054 thanks sir ..🌹🙏
@@kskmakes8054 watt 50 or above
BHAI ISKA KITANA DAM HEY PLS PROVIDE ME
Filter board konsa use kiya hai
Ne5532 2.1 pre amplifier board
Flawless 🎉
Thanks for watching
@@kskmakes8054 where did you purchase bT board
Wow, chota packet bada dhamaka . What is the power supply and how much amp ? And what is the costing of the amplifier? ❤❤❤❤
5amp 24volt dc
Thanks for watching
Verynice
Thanks
Simply nice
Thanks
did it make buzzing noise?
Pls advice. I need Class D Mono amplifier 60watt with only Single MIC input connection, 3 poteniometers. Bluetooth, pen drive not required. where can buy from? available DC supply 12v and 24 volt.
Yeh banane mei itna money lagega ki usse 5.1 board app local market ke buy kar pawge.
Please reply what power supply is use in this 🙏🏿🙏🏿🙏🏿
24volt 5amp DC thanks for watching
Thank you 💘
How much this amplifier bro
Not available
Hola ksk makes me pudes decir los materiales y los wath de cada parlantr
Products link shear please
You should explain deeply with voice
Menuda potencia para ser un mini amplificador de 2.1 con unas placas pequeñas
Super okkasari fm kooda on chesthe chalabaguntadi
Keren tpi kit amplifer tpa mudah panas dan protec
Subwoofer me only bass aaraha hai ya sound
Subwoofer only Bass
@@kskmakes8054 agar bass controller ko 0% or volume.trable 100% kar denge to subwoofer me bass niklega ya only sound niklega
Podre modificar mi parlante para que suene mas fuerte
Good job Sir! I just subscribed
Thanks for the sub!
A este amplificador le puedo instalar un torna mesa ?
You should use Voltage regulator 7805 replace of tepd down circuit
Thanks for watching
A step down converter is more efficient than the 7805 Regulator
Nice
Excellent sir
So nice of you
Can you make 60Watt Mono class D amplifier with only MIC input.. no Pen drive No AUX no display..only MIC with 3 poteniometers and speaker connection.
Which board s instalation and their model numbers show me sor
Check Description
Better to use tpa3116d2 2.1 amplifier board
No need
Can it use a saloon car 12v battery?
Yes use no problem but output power down
You can use 12v to 24volt boost converter
Thanks for watching
Total cost bro.
Not available
ap ny Subwwofer konsa use kia how many inches of it and wats
8 inch sub 100watts RMS 200watts peak
Do you reply also?
What is the brand of instant glue?
Anabond cyno 555m
How many amount are spend for this project????
1200₹
Hi sir es me Ketan kharcha ayega
Wish i had that
Total Cost? Noise Floor?
Not available
Amplifier Final Price??
süper(TÜRKEY)
Not clear explanation.explain about bt sub board
isme explanation krneka kya jarurat ic ka name diya hi hai search krke dekhlo Google me dimag bhi use kya kro thora
Are you from india
আমার একটা দরকার তৈরি করে দিতে পারেন
Kiyak yanawada meka hadanna
Ki vabe pabo
Exlent work
Thanks a lot 😊
Mujhe aapse milna hai to kaha mil sakte hai
Nice👏
Thanks ✌
❤❤
Y tambien la midida de cable
I want dual audio out put board name plzzz
Ты бы ещё больше корпус взял
Thank you for watching
Size to Mila but metirial ka nam kya?
Material PVC sheet
Brother mera ko chaya 1 pic ready to use please send me one
Falto el ventilador para mantenerlo fresco
Thanks for watching
@@kskmakes8054 para que no caliente
❤❤❤
7.1 amplifire
Sir ji .... 3 channel (2.1) amplifier ki connection kaise karenge ? Jab humhare Bluetooth card mein sirf left right 2 hi channel hein to 3 channel ( 2.1) ko input kaha se denge please help me 😥
You use 2.1 pre amplifier board link 👇
amzn.eu/d/0jWnbpG
@@kskmakes8054 connection pata de bahi board toh koi bhi le lu gayn kaha se ayegi lekin ... You should tech me as well sir 🥺🥺🥺
that mini power amp class d is too hot in a tiny heatsink. maybe better replace a better cooling system that makes last long to used
Thanks you for watching
Kya aap sale karna chahte ho ye amplifier
Not available thank you for watching
@@kskmakes8054 plse sir
Ok
Where is power supply
kidal
Yes
এই বোটগুলি আমরা কোথা থেকে পাব
Available in Amazon
Aku mau beli itu
Thanks for watching NO sale
bahan-bahan nya apa aja yg diperlukan om
Bantu jawab mas..
Tone control 2.1
Modul Bluetooth
Step down
TPA3118 (untuk subwoofer)
TPA3110 (untuk satelit)
Soket dc
Terminal speaker kecil
Terminal binding post
Soket RCA
Sir all diagram showing plice🙏🏾
Ok next time
এটা বিক্রি করবেন ভাই
Not 60w you get only 50w
Ok thanks for watching