FAST™ Quick Tech Video: Proper EZ-EFI® Fuel Pump Installation
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- This Quick Tech Video from FAST™ discusses fuel system choices, proper placement of an external fuel pump and how to avoid a few of the most common mistakes when installing the fuel system for your EZ-EFI®.
If you want to quiet an external pump, use rubber bushings between the P clamps and the body of the vehicle. Up to 50% quieter.
Thanks for the tip, Art. Be sure to let us know how the EZ-EFI runs, and thanks so much for watching!
Thanks for the video. I'm still "old school" with carburation. I use an electric pump mounted below the fuel cell to acertain fuel is always at the pump. I didn't look up the install instructions for the EZ EFI, but a good safety tip is to use an impact switch in series with the pump wire to kill the pump in case of an accident. Getting ready to put one on this week.....Art
instablaster
If i use a higher psi than needed will my factory fuel pressure regulator maintain proper pressure
I'm have a 1993 caprice 5.7 throttle body engine bad mechanical fuel pump what would do I need to remove prior to installing external pump also what psi would I need
do i have to remove the old pump inside the tank before installing the external fuel pump or will it works with the old pump intank
if the line is broken from the filter since i see fuel dripping how do i cut the line from the tank from the filter to add a new filter
can i relocate the filter and put it somewhere close the engine is that a problem, thanks for your help
if i am installing an external universal electric fuel pump on a 94 chevy astro:
1-do i need to take out the old and non working pump from the tank or can it work like this
2-if the line is broken from the filter because it is very old how do i cut the line to replace the filter, since i see fuel dripping from the side of the line coming from the tank
3-does it matter if i relocate the filter, closer to the engine ?
thank you for your help
+ralph whitaker For these questions your best option is to call the FAST tech line at 1-877-334-8355 or email tech@fuelairspark.com. Those guys will have most knowledge and available resources to help you out. Thank you.
+FAST (Fuel Air Spark Technology) t by
my car is ford crown Victoria normally the fuel pump found inside of the tank , if i want replace the site to install the pump outside the tank is that ok without any problems in middle east hot weather? some times degree touch 50C ! anyone had experience can reply to me thanks for him a lot.
BTW "Carburetion" not carburation......I thought it looked funny :)