Truck Pull #2 Jackson Co Jr Fair July 30, 2022
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- We always enjoy our two days of shooting at Jackson County Junior Fair in Cottageville, WV at the end of every July. This year definitely didn't disappoint. The Friday night Mud Bog had quite a few entries from daily drivers to the high speed rails and trucks. The pit was challenging and kept the drivers busy till three in the morning. Saturday's Truck Pull was just as fun and also lasted late into the night. If you've never been to the JCJF we highly recommend it.
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
1:48 Goodbye, head gasket. Literally gave it its all for that run.
YUP....then the Chevy outpulled it a few trucks later ready for another run.
Keep posting these videos. I like seeing the old irons draggin' sled!
I love seeing these old trucks put in some work. I love old trucks!
Old trucks are the only trucks I trust
That death trap with the wibbly wobbly wheels was fkn hilarious LOL
Yea, I surprised to see Death Wobble at 15mph. That was a first for me
@@gumballer133 It didn't have anything to do with speed in this case, faulty suspension couldn't sustain the torque
@@ingodwetrust1136 Well yea, I know it. Looked awful unusual though!
@@ingodwetrust1136 It's not faulty suspension, it's how Ford's TTB is, garbage.
@@ericjohnson8482 yeah I'm not a fan of the TTB I swapped mine for a Dana 60 but my old ttb never did this under high torque and plus there's other trucks in this video with ttb and they're not doing the same thing, I have a feeling you just wanna be a manchild fanboy and brand bash if you wanna go that route ifs chevys are king of collapsing thier tie rods
I like how that Ford put an IFS Chevy mask on....
The ole twin traction beam didn't like that.... JUNK!!!!!
@@stanleykendziorski7964
The TTB is actually pretty strong. I’m surprised it did that. Although it was an F150, so it was beyond its capabilities!
@@dodgeguyz the half ton ttb is basically a dana 44.. weak points besides a regular d44 is the tie rods as you saw, and the pivot like on all ttbs... the 3/4 tons, and one ton 4x4s 80-85 got the dana 50 ttb, which is a bastardized dana 60 and a dana 44.. essentially a dana 60 housing with a 44 ring and pinion..
Best option if you have a half ton, un bolt that ttb, roll in an 05+ coil front, very little work to use them.. easiest for the 3/4 tons or early one tons is find either a kingpin or ball joint dana 60, both are awesome, and they 99.9% bolt in
@@stanleykendziorski7964 the TTB had nothing to do with why it failed. That was issues due to tie rods bending from the improper angle they were at.
@@DDFJ1230 and why were they at the improper angle?
The white f250 with the headlights xd out and no mirrors is me lol
Sounds good!
Always fun to see the daily drivers out pulling the sled. Last 2 times I did that with my old 1972 F250 I took first over the local daily drivers. I run it as I drive it daily. Some if the boys tried to make some special mods just for the pull and still lost. That’s why I have not done it in a few years no real local compilation
The Ford at 3:57 and the Chevy at the end were great.
ohhhh goood for you.
And you guys accomplish so much by doing that 🤣😂
@@carmichaelmoritz8662 they have fun. Try doing it sometime.
@@reidthompson8979 I wasted so much money having so-called fun. There's better ways to have fun without wasting.
I was there and those boys gave it hell a lot of fun👍🏻
Not 1 single brand new mall crawler in the bunch...nice!!
Bullnose Ford best looking truck out there 💪🇺🇲
Nope, OBS then 68-72 chevy
@@BruceMyersLBZ no Bricknose ford
Nice to see some square body gassers. Late model diesel pickups have ruined truck pulling. They all look the same with the same rims and tires, same setup. No imagination or creativity. I'll take old square body gassers any day.
Good ole ifs. Wonder if the ball joints/king pins (as they called them for a few years) on that ttb were worn out
No he said that the whole tie rod bent
it was lifted and had stock crappy steering
Nope just to much American power going to the wheels
@@gagedelong4834 Didn't hear that part.
@@LuisMedina-rg6tt not from a Fix Or Repair Daily
I believe that's the first time I ever saw a frontend do that on a Ford. Very common on ifs Chevy
Ford death wobble, very common.
You must not seen many Ford's then. It's common on everything with IFS.
@@ericjohnson8482 I’ve seen literally hundreds of truck pulls and to my knowledge this is the first ford I’ve seen do this while there’s whole compilations of chevys. I’ve owned many many ford trucks by the way. Ford trucks from those years didn’t have ifs anyway!
@@Truckman1980 TTB was Ford's answer to IFS. It was a terrible design and you've never seen many then if you've never seen it before.
@@ericjohnson8482 I guess you can call a man a liar if it makes you feel better but yes I’ve seen hundreds pull and owned dozens of fords
Reckon Jackson county is bull nose ford rich
Hell yeah..obs fords are the best..people that have never owned or worked a 302 or 351 really don't know how capable they are.. and don't believe the power ratings ford puts out there notorious for putting out lower figures then what there motors actually produce.. hell I've out towed many 360 dodge magnums and Chevy 350s with a little 5.0 302 in an f150.. and there some hard to kill engines..keep oil and a good tune up and they will run forever..
Ford trucks can take a beating better than the others
that is why the Chevys all didnt break down and outpulled the Fords. Did you stop watching the video after the first minute? it was all about chevy 330 plus fords top was like 329 and he blew the hell out of the head gasket. Chevy was ready for another run.
@@Mikefngarage you don’t build the Engine right they will all blow
Out of curiosity, what was the weight limit in this class?
It’s sad that a 1920 steam tractor with metal wheels would pull that all the way to the end. As long as time wasn’t a factor it would always win.
and how much does it weigh compared to a truck?
@@KS-xo3oh technique;ly they are called tractor pulls and I didn’t know they were daily drivers. Who says you can’t drive on daily. th-cam.com/video/ZhVDqRnZxao/w-d-xo.html
Интересно Нива или УАЗик с место хоть бы тронулись 🤔
😂😂
Тронутся на пониженной
This is what gas truck classes used to be around here in Indiana. Now nobody pulls street stuff gas or diesel. Work stock classes used to be 20 plus trucks now your lucky to get 3
And those are the best! The biggest show at our local pulls every year is the stock trucks
It is like this, there is such a supply issue with auto parts in general. Not to mention these parts aren't made here in America anymore since the older companies have shut their doors here. Then you have to rely on Chinese reliability.
I bet they could mess up a chinesium sled weight...
Looks like....lol ...the newer trucks just give up. Those early 80s trucks are still pulling their weight. 👍 No tundra's? LOL!!!
What broke on the Dana 50? Because it looks like it folded in on itself.
I think he broke his tie rods maybe.. he still kept it straight and gave it hell..
steering related not diff
@@jdubskiwright2380 My 97 HD has a larger tie rod, on the one side. Wonder if they did it for that reason. Can't remember how they were on my 89.
@@ahorsenamedoaks1377 everything seemed to still be spinning just looked like the tires lost there way kinda lol.
The guy lifted his truck but didn't use a dropped pitman arm, putting the tie rod and drag link on a bad angle and forward torque bent the shit out of them. It was most likely a little squirrely on the street even before that. Lift it the right way or leave it the fuck alone.
Love watching these old gas power stockers pull. You know trucks probably started just like the tractors some farmers argued about who's truck was stronger. And go back passed the mid 90s and most 3/4 and 1tons were gas power alot were big blocks. Diesel was out of corse but not alot bought them. They were no where close to modern diesel pickups.
But but gm ifs. Nothing compares to that trash twin traction beam🤣🤣🤣
every truck screamin its heads of.
That one red Truck just leisurely trotting along the track XD
People are brave to put old trucks to the test in 2022 with all the parts shortages going on. So many companies feeling the strain are not making old truck parts anymore. This was fun to watch and I’d like to compete in one someday!
Scrap yard?
Theres still a ton of the 80s shit to pick parts off of
sooo many clean bullnose fords!
Mis respetos para las camionetas Ford, son bien aguantadoras, y tienen buen motor y ya modificadolas del motor corren chido, aúnque creo hay veo que tiene tracción 4x4 pero se la rifa la neta
That's the most american thing I've seen today
Valve float makes great rev limiter.
Yes
Yup stock springs and adjust them at 1/4 turn. Limits out just where you need it. ha ha. Been doing that on my old Chevy's for years.
3rd pickup, "look at me! I'm a chevy!"
Love the guy who must have gotten daddys pickup and took it out to the pulls. Like a brand new Ford and still pulled 260....impressive.
Are those completely stock engines with stock carburetors on those trucks?
That is what you get for failing to do a pre trip inspection
Long life to bullnose trucks
Wonder what the 300i6 with a granny 4spd would pull in that
Not good not enough wheel speed
I used to have an '83 with the 300 I6 & it wasnt anything to brag about, barely could get out of its own way
@@SquirminHermanthe1eyedGerman yeah but this one I got I like the idea I can get out of it and it crawls itself up a hill with a load on the back mines a brick nose just like that one
@@jakefisher7280 Thats cool! I will stick to all my old Dodge trucks & I have one with a 4sp with a granny gear that crawls over & through just about anything
There's actually quite a bit of shit you can do to the 300. I had a '76 F150 and it had an Offenhauser manifold and 4bbl, upgraded ignition, hogged out exhaust manifold for bigger exhaust system. It kept up with all my buddies V8s. Even with 33" tires. Power Nation did a sick build on one, check it out.
Ford trucks #1
The Chevy at 4:56 is what I think of when I think Chevy.
Pull truck #3 reminded me of a girl I dated in high school....She danced a mean lick but struggled to keep her knees together...😄🤣😂
Those old ford independent suspensions were the worst all around rode like crap stunk to work on didn't hold up. That's why they went to solid front ends like dodge and chevy and then ford went back to solid frond like chevy and dodge but then chevy went independent front and is still better than ford
Well this is Trump country, and gas at 4 bucks a gallon, they still have money to do this , must be using those stimulus checks
Promods n shit are cool and all. But id rather watch street class. I like the fact the vehicles can be street driven
'
american M1A tank is easily pull to the end finish line and win
Don't understand why some of the driver's are pulling in 4hi instead of 4low🤷🏿♂️
Or letting a little air out of the tires for extra traction.
I had a friend that did that once, he'd done a bunch of pulls with his hopped up cummins and was convinced it was tough enough with a 100% stock transmission, he got about 75 feet before he had 3 neutrals and reverse was going forwards 😅
@@BeandiptheredneckOMG 🤦🏿♂️
@@David-yy7lb it was pretty funny for all of us that told him not to, he's never heard the end of it either
@@KevinBenecke probably better to let the wheels start spinning instead so you don't blow a shaft or u joint
That TTB though!!!!
A great example of why they're garbage, looking to swap mine for a solid axle soon
NlSSAN VTC 💪🏻
This is American vehicles They don't have Japanese vehicles 😂
Stupid Ford axle sucks!
Ahh the tractor pull...Ive always said this is pretty much a perfect .metaphor of most relationships...starts out hot n heavy..runs out of steam at the end.
Nice 👌
3:22 girl is hiding her face 😂 she’s like shit I hope my other cousin doesn’t see me with another guy that’s also her cousin
anyone else notice all the newer ford diesels but 1 driving like they scared something about to break.
Why does the front wheels wobble like on the blue Ford??
I dont really understand what happend and why
I thought there was a shortage on the newer truck stuff… we need to save the older trucks.instead of scrapping them
Hard to beat those Chevrolets!
Can someone explain why some drivers are pulling at full throttle while other aren't?
Seems like a competition between Chevys and the fords were there to fill in the extra spots
I have tahoo can i particept??
That last chevy was nice! I like the mid 70s multi colored one too!
@Hmm yea i think so There were several Chevys that outpulled the best fords. Wasnt even a contest. Near none of the Chevys broke 2 fords Broke. The Chevys were ready for another pull.
My buds 390 would hate him if he decided to enter one these pull events
I was there having a hell of a good time. I work at the fair every year to.
Wtf are they even pulling
Ohhh tooee, where did it goo.
351 Windsor is probably the best production v8 ever made
right next to the 460 BBF!!
Yeah maybe but they are both right after the 350 and 454 🇺🇸.
351 Cleveland was better imo.
@@gagedelong4834Chevy sucks always been behind Ford never understood the blind fanboyism from government motors crowd they are and will forever be 2nd to Ford
i thought this was a commercial for FORD until. the 2 out of 3 CHEVYS outpulled most of the Fords. IMO chevy would be the easiest truck to build. parts are more interchangeable and IMO more available to make something for a strong contender.
Ecology class euro 6!!
Awesome video good job
The dodge tho 🤣🤣🤣🤣🤣🤣😆😆😆😆😆😆😂😂😂😂😂😂😂😂😂😅😅😅😅😅😅😅🤣🤣🤣🤣🤣🤣🤣🤣👍
Anyone have an idea on the wheel and tire setup on the 2nd bullnose
What is up with the 3rd ford's from end?
It's transgender and wanted to be a Chevy...........
@@rrknl5187 yea Chevy never did produce a sturdy front end on a 1500.
It's just a lost Ford.
its a Ford
@@rrknl5187 haha girly fan boys love their fords
Saludos desde tiltil chile
Fords and their scissor suspension front wheels never flat
The last one looks like my truck that was stolen year's ago
2:48 that guy didn't wanna get his truck dirty. Lol
nice to see some gasoline V8 pulling and not diesel shits.
At 1:34 I know what the problem is it don't got gas in it
Ha it's flexing
Surprised that triton held it's spark plugs in
1:10 omg stop 😵💫
Fix on race day
am I tripping or was the 1st one an f150?
Why cant they tell you what weight they maxed out at?
خسره نات علىهذل
Ford models?
🎉 wooooooo
Hi my name is Chris I like your video
That Ford identified as a chevy
Chevy ❤
Who won
Why
Pp
P
Looks like the GMs came out and finished the ass whoopin.
That bricknose could have kept going if the tie rods didn't bend. It was still trying to go even after the wheels were both going inwards.
just like they been doing for decades
@@SquirminHermanthe1eyedGermanFords whooped those junky cheby Chinese motors “trucks” reason Ford outsold every other manufacturer for over 45yrs get real
@@CoyoteFTW you keep believing your dream & if you were 'Murican your English wouldn't be so atrocious
Ничего не понял
Y
3:21....FINALLY!!! .....A Dodge....
Como funciona isso afinal? Esse peso?
В чем смысл?
Bien
😅😅😮😮😮😮😮😮😮
Twin I beam junk
Big thumbs up from this Canadian!