Million Dollar Bogan and BLOCKHEAD both uploaded at about the same time and now I woke up and don't know which vid to watch first damn I think I'll start with this one :D hehe love both these channels,my fav right now,oh and nice 222K subs :D
I know I’m late to the party but is it imperative to get a tune after installing these? Have stock pipes now. Just wanting to wait on a tune until cam if possible
Hey block,do you know anyway to get melted fabric off the pipes I have the same ones I actually used this video to install them so much appreciate !!!! My pants melted on to them plz help if u can
Well I did it. Traded my FXBB for the FXLRS for basically the reason you traded. I got a long commute and I was filling up every other day on the old bike. Also the FXLRS was everything I want to do to my FXBB anyways.
Hey man! Can you help me with passenger pegs. I have the same bike and am getting same exhaust. What extender kit and passengers pegs did you go with to work with the pipes?
I have Bassani pipes on my Sportster XL 1200 and I cannot mount the rear passenger peg due to the pipe blocking the mounting holes on the frame. Any suggestions on how to mout the peg?
Most say you can get away with running just an exhaust and not updating tune, but a tune is always beneficial. That being said, I ran a bike with exhaust only for a long time with no issue. YMMV
@BlockheadMoto ill probably just stick with slip ons for now, if I'm going to swap the exhaust, I'll do the cleaner and tune at the same time. Thanks for your input, I appreciate and love the content
Doh! Crush washer's are used for timing on muzzle brakes or flash hiders on the ends of barrels, traditionally on rifles. Some habits from me being a firearms instructor are hard to shake, lol
Yo. What happened to the lever install video you did for lucky speed shop. Bought a set of levers from them and am having an issue with the break lever.
Any idea if it’s louder than V&H? I had a pair of Short Shots on my 48 but I bought my LowRider S back in April. Tired of sounding like a sewing machine.
Bassani is still not listing 2020 FXLRS fitment on their site for the Sweepers. Which kit did you use; Fat Bob? Also is there a BLOCKHEAD discount code for Bassani?
What sissy bar did you get for it? I’m having a hard time finding any that fit and look right on the low rider s. I’ve basically only found the Harley Davidson detachable ones.
This may be a dumb question but would this fit on the 22 fxlrs 117??? Just picked my bike up on the 10th exaust and small bags are the first thing I want to do and these blow my mind
Hey Blockhead you have the baffle inside yours? Put these on my 17 fxdls without the baffle but haven't started it yet after my new engine replacement due to lifter failure 110 se
“ If my theory is correct” 😂😂 famous last words.
Truth, lol
Yes! I love the sweepers so much more than the road rage. So happy you went the same as your last low rider.
Def!
I would love to see a "total cost" tally as these videos come out.
I wouldn't! 😂
There is no cost to this build
@@smoknthecity3163 My bank account disagrees with you.
@@BlockheadMoto HAHA
@@smoknthecity3163 … Beer !!
So....i was advised by harley that these were not "50 state compliant" and will void my factory warranty. Do they come with cats / baffles?
Bagger Bro just takes the entertainment value up. Always adds hilarocity to the vlogs.
Why thank you! 🙂🙃🙂
True story 👍
@@BaggerBro You're welcome. Didn't know you had a YT channel. Just subscribed.
@@ScenarioschrijverPlays ayeeeee gonna have some more content soon.
BaggerBro awesome. Can’t wait.
Not my choice but it’s not my bike. I’d go with a 2 into 1 pipe .
Sounds good though. Enjoy the ride 😊
So mean looking! Love the black on black.
🤘🏼
Nothing comes close to the sound of those pipes!!!! Love your content!
Thanks man!
That growl is insane. Nice.
So next up gold foot pegs and gold gas caps?? Cause well “I like gold”( in gold member voice)
Pegs yes, gas caps no, lol
@@BlockheadMoto Imagining what the wheels would look like gold.
did you have to do a tune? I have the M8 117 brand new. I was informed by harley that i needed a tune to avoid running lean. Please advise.
YES! I’ve been waiting for this video since the last vid of ur upgrade plans!
🤘
Hey, do we need a tuner using bassani? If we need, what tuner should we buy?
Thank you
The sound it made at the beginning of first start up was awesome. Keep up the great content.
Million Dollar Bogan and BLOCKHEAD both uploaded at about the same time and now I woke up and don't know which vid to watch first damn I think I'll start with this one :D hehe love both these channels,my fav right now,oh and nice 222K subs :D
I remember the first time i wrapped and installed my new pipes, forgot that the heat might steam the water out of the wraps 🤣 nearly shat myself!
you change the pipes and the bike run whitout doing raters ? you also have install fuel pack
How’d you get the OT sensors off!? You didn’t show that, I’ve at this for hours and they won’t unclip
That M8 with 2 into 2 sounds freaking good.
For sure!
This is one of the few pipes that sounds really similar on both TC and M8
What do you think
bassani or tbr for the low rider?
These should fit the 2021 low rider .. same engine . What do you think ?
Great sound...
Did you do a tune on it after....or do you even need to...
Thanks
I'm curious about this too.
I was hoping you’d go the 2-into1 route
Don’t you have to change the tune where are using the stock tune on the motorcycle
I know I’m late to the party but is it imperative to get a tune after installing these? Have stock pipes now. Just wanting to wait on a tune until cam if possible
6:40 You totally blew a rev bomb opportunity!
just bought these for my 2014 Softail Slim FLS. So tired of that quite little stock exhaust
Hey block! did you put a fuel pack on after doing your exhaust?
@8:37 did you almost hit a mop in the road?
no remapping the fuel delivery???
Hey block,do you know anyway to get melted fabric off the pipes I have the same ones I actually used this video to install them so much appreciate !!!! My pants melted on to them plz help if u can
I was so stoked to see you didn't put a two into one.
Right?! The amount of people criticizing me though b/c I DIDN'T do a 2-1, crazy lol
Did you have to tune it? Getting these same pipes on my street bob next week.
love that last shot of you riding into the sunlight....prettyyyyyyy!!!!!!!!!!
Yes bout time we got the video of this swap out. Good stuff hommie.
👊🏼
I missed the part about the tuner and what about the Harley warranty? What tuner was used?
Is this louder then the two brothers 2 to 1?
the perfect bike doesnt exi....
Preciate you! 👊🏼
Well I did it. Traded my FXBB for the FXLRS for basically the reason you traded. I got a long commute and I was filling up every other day on the old bike. Also the FXLRS was everything I want to do to my FXBB anyways.
Did it block your passenger peg Mount
Do you know if this will void my warranty?
Love it! Sounds absolutely amazing.
Hi , Can you still fit passenger pegs ??
Damn, and I had just ordered some bassani road rage 3, making me think twice. I like the sound of these a lot!
Can the factory exhaust port gaskets be re used in this type of application? Or do I have to get different thickness gaskets?
Handlebars next?
Soon!
Love the bike does it need a tune for the pipes Tks.
You don't have to install a tuner?
Hey man! Can you help me with passenger pegs. I have the same bike and am getting same exhaust. What extender kit and passengers pegs did you go with to work with the pipes?
I've got a set of Radical Radius' on my Indian Scout. They look very similar to these and they're loud.
How much was the cost exhaust?
Was that a broom in the middle of the road?! I wonder if that witch is ok?
What about the warranty? Still ok with HD?
Didn't see any tuner. Did you use one? Or can the bikes computer compensate?
Thank you I found my pipes lol I have a 21 low rider S 114 CI when I put these pipes on do I have to have it tuned or is it direct plug and play
They sound as good as that look.
Did you add a fuelpak???
Do you recall what mileage you were at when you installed the exhaust?
Did you add a tuner? Won't this kill your warranty? Sounds good..
I have Bassani pipes on my Sportster XL 1200 and I cannot mount the rear passenger peg due to the pipe blocking the mounting holes on the frame. Any suggestions on how to mout the peg?
Didn't need to do any tuning?
Did you need to tune it after installing them?
Love the sound! Did anyone else see what looked like a shovel laying in the road just before the end of the video?
Yea, and I think it might have been a palm frond.
Yeah it was a palm frond
I thought it was a mop.
What’s the torque spec for the flange bolts ???
Did you have to get it tuned ?
I live in California and they won’t ship here. 😭
Can't wait until you do the cam,and make it sound lumpy.
My lumps, my lovely Harley lumps
Did you have to do any tuning after installing?
Just got my 2021 FXLRS, got my hands on some exhaust, but if im only swapping the exhaust, is a tun necessary? Everything else is stock
Most say you can get away with running just an exhaust and not updating tune, but a tune is always beneficial. That being said, I ran a bike with exhaust only for a long time with no issue. YMMV
@BlockheadMoto ill probably just stick with slip ons for now, if I'm going to swap the exhaust, I'll do the cleaner and tune at the same time. Thanks for your input, I appreciate and love the content
Will this exhaust system be compatible with the Bung King rear crash guards that replace the factory passenger pegs on M8 Softails?
She sounds super nice.
Did it run good without issues just doing the exhaust and not an aftermarket air intake or fuel tuner?
??
Hey block, how come you went with the radials instead of the 2 into 1?
Did you say crush washer? I’ve never heard a lock washer called that before. New term terminology.
Doh! Crush washer's are used for timing on muzzle brakes or flash hiders on the ends of barrels, traditionally on rifles. Some habits from me being a firearms instructor are hard to shake, lol
Do you plan on doing the front fairing soon?
As soon as Memphis Shades is done with their redesign! 👍
Blockhead what did you use to tune the bike, FP3? If so, did you just say fuck it to the warranty?
Sounds amazing, makes the whole bike!
Yo. What happened to the lever install video you did for lucky speed shop. Bought a set of levers from them and am having an issue with the break lever.
Which sissy bar is that??? These bikes are really starting to grow on me
Did you put a tuner on it as well?
Did you flash the ecu after install of bassani?
Sound's GRRRRREAT!
Peepin those Hard Case Performance risers in the background. Gonna look dope, just got my set in for the fxfbs.
Good eye! haha
I just bought a 2021 lowrider s today
Love your bike bro! My future bike really soon!
Any idea if it’s louder than V&H? I had a pair of Short Shots on my 48 but I bought my LowRider S back in April. Tired of sounding like a sewing machine.
This is the same exhaust you installed on the Dyna Low Rider S...
Bassani is still not listing 2020 FXLRS fitment on their site for the Sweepers. Which kit did you use; Fat Bob? Also is there a BLOCKHEAD discount code for Bassani?
What sissy bar did you get for it? I’m having a hard time finding any that fit and look right on the low rider s. I’ve basically only found the Harley Davidson detachable ones.
Baby talk at 4:44, never noticed until you mentioned it on your last video lol
Sounds good. Maybe air cleaner and chip next?
Kinda late to the party on this one but I just purchased this same bike and exhaust. Did you throw the FP3 fuel pack on it as well?
I promise I put Bossanis on my 09 Deluxe and I love them! Had to say goodbye to the Big Radius pipes.
COOL ..wanted those , but in the end gone with v&h big radius 2*2
I like the looks of the exhaust on my electra glide standard. The big mufflers on some other models need to go!
Hi Blockhead, great video, what’s your sissy bar?
Just wondering, you don’t need no tuner for this mod?
This may be a dumb question but would this fit on the 22 fxlrs 117??? Just picked my bike up on the 10th exaust and small bags are the first thing I want to do and these blow my mind
Wow. Installing the exact same exhaust as like two other times before.
Wow, doing what I want, like I've always done.
Hey Blockhead you have the baffle inside yours? Put these on my 17 fxdls without the baffle but haven't started it yet after my new engine replacement due to lifter failure 110 se