ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
dSPACE Tutorial 1 (Sending Signal)
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2024
- Simple experiment performed in order to learn how using dSPACE control system a signal can be sent to some assigned device. This has been conducted at Water Software System (WSS) Laboratory, De Montfort University by Ashfaque Alam and Samir Ghosh. For learning advanced interfacing using dSpace, download the report from here: drive.google.c...
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.3 (3/4)](http://i.ytimg.com/vi/733LDfWIyc8/mqdefault.jpg)
You've just saved my life, thank you so much!
th-cam.com/video/wpo_6R2BGg4/w-d-xo.html
Great Job. Very well presented and very practical. I had been trying to find out the use of dSPACE for some time now. The official dSPACE tutorial videos quite frankly are not as practical as this one. This is very good. Thank you.
Thanks for the kind words. Cheers.
Great job guys....u really wanted to make us understand and u did it. A salam to u guys.....keep posting such educative videos to poor chaps who cant afford these systems.
Once again thanku very much
th-cam.com/video/wpo_6R2BGg4/w-d-xo.html
Thanks Anup. The HIL testing demonstration from you was clear and makes the understanding of testing better.
Thanks bro ,now I understood the dspace concept
Fantastic Tutorial
Best introduction, and it is very helpful for the beginners
Very well explained, Ashfaque and Samir!
th-cam.com/video/wpo_6R2BGg4/w-d-xo.html
Excellent tutorial. its very clear information. please upload more tutorial which will help to learners. thanks a lot
Please find all three tutorials and see if it helps your need. We are working on some more tutorial now, but this may take a bit long. Meanwhile wait for the .pdf copy a technical report which will hopefully help you figure out some more automation rules. Thanks for the inspiring comment.
Bro too good , Thanks for this tutorial.👏
Very useful info. Thanks for sharing.
Cristal clear explanation thanks a lot
great work, thank you so much
Fantastic, a very helpful tutorial on the subject !
Great Video....Thanks for making it👍
Thanks Ashfaque. That was very detailed and nice..
thanks, this is a nice video
very nice explanation
A great tutorial video! Thanks a lot!
Cheers! Thanks for watching.
+WEN FEI Hi , 74% OFF coupon to Learn Matlab Udemy course
www.udemy.com/learn-matlab/?couponCode=ML25
found this just now .. needed to understand what dSpace is ... and the marketing material from dspace just is confusing if you not sure what you actually should do with it - Iam looking form IT integration perspective will not do work with my self. Maybe they should look to your video get some down to earth material done ... not evrybody is years in the bussiness and can imagined what is ment. Thanks !
I had also once a server that was called Hello Kitty ;)
Really good video
Many thanks
very good video. Thank you
GOOD JOB!!!
Very nice
thanku so much
please upload more tutorials its very helpful
very helpful
thank you
How are you able to map the constant block from the varibale section to the slider and vary the constant(which dosesnt vary) ?
yeah, I myself do not see parameter in control desk
Ashfaque. If by chance you have any tutorial like this with a big plant connected to DSpace like pump or motor as you said would be very helpful. I have a similar project and all these things are completely new for me. I am little afraid to use the system without thorough knowledge. Please upload if you can, soon. Thanks.
Hey, I am trying to send data to a Master-Bit-Outx but its not showing on an oscilloscope where i am trying to read my input.
I have selected the right bits which connects my dSPACE board dS1104 with my I/O unit. There was a different simulink model which was previously working fine with DS1104 but since i tried to connect a new simulink model with the board, it works fine in control desk but the output cant be seen on an osci. what ight be the reason ?
To send this signal you have not run the MATLAB Simulink file? Then how you are getting the signal in the multimeter?
Nice video. I am generating PWM signals with DS1104SL_DSP_PWM block which allows to generate PWM at fixed specified duty. How I can provide my switches signal with specified PWM and phase?
bring video on control of boost converter
i am using ds4505 interface board with rti1006. how to simulink RTI can comunication ? thanks
by this way can send signal like "sine wave"(analog signal)??????
Hello, Thank you so much for the video. I’m your new subscriber. Can you please share if any information on automation Desk?
Mr Ashfaque, I am able to send and receive the signals but I am unable to find the variable (parameters) of Constant block in control desk. I am not able to load the parameter into the slider because the control desk is not showing the variable.
I think I am missing some MATLAB advanced settings because this problem came only when I installed a fresh MATLAB
shouldnt the output be half the value of constant because you had that 0.5 gain in between?
it was 0.1
Super, can tell the rating of the dspace
Ashfaque Alam Hi mate great videos, I never used dspace before but I might be working at an automotive company come January. Is there any great, comprehensive, detailed but introductory resource(book, lecture notes, videos) that you can recommend that covers the entire Dspace automotive model based design work flow ? Namely, tools like VEOS, TargetLink, ASM, Control Desk etc etc. I'm trying to learn as much as possible so I can hit the ground running. thanks kindly. your vids r a great start :) Any resource recommendations ?
For dSpace, your learning should be system dependent. For example, control desk have different versions including different processors. Don't need to worry too much. When you join, you will get documentation sets if the company have licenses for particular tools. What I suggest, for first few weeks spend a bit more time on those documentation which relates to your basic working activities such as how to load the model in control desk, measure signal, find signal variables etc. Do not try to learn everything, just plan what you need to learn to ensure your regular works are smooth. Then, slowly increase your learning phase. Learning the dSpace can never be finished :)
bhai can you tell how to genrate pwm signal on cro using a simple matlab model
Can dSPACE be used with LabView?
hi dude, i have a problem when i try to build the model in simulink, i'am working with the DS 1104, the problem is "Simulink does not permit you to build programs in the MATLAB installation area. Please Change to a working folder that is not in the matlab installation area. it´s important to mention that i changed my current folder.
What configuration do i have to do in simulink ? i have DS1104
oscar samuel cortez moreno So i had this problem to , u need change the place when the matlab complied your folder for that use de comand "cd" and after input the place where you save the folder. for exemple:
"cd c:\users\documents"
for me this steps works...
Nice video. Can you tell me how to install dspace on win7 or win xp 32bit. thank sir
How can contact to dspace
Dear Sir,
Greetings from Birla Institute of Technology and Sciences Pilani, Dubai Campus!
On behalf of the research group in the Mechatronics Lab, I write this to request for guidance.
We are trying to control a stand-alone Servo motor using a PWM wave.
We want to generate the PWM wave using the Slave I/O PWM Pins on out Dspace DS1104.
Kindly help us with this. We will be highly grateful if you could provide us your contact details.
Thank You.