STOP YOUR CAR DOOR FROM CLOSING ON YOU!!!!
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- Car Truck or SUV Door Check/Door Detent/Door Stop Repair...no matter what you call it when it does not work it is a true pain.
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
________________________________________________
If you would like to help us out.
www.paypal.me/YourSweetProjec...
________________________________________________
Other Door Repair Video
• How To Fix a Car Door ...
USA TOOLS:
Door Check amzn.to/3nIvx8s
Vice Grip Set amzn.to/2xDSTnL
Full Synthetic amzn.to/2DjMJPH
Hammer amzn.to/2xCEYyl
Venom Gloves amzn.to/2B8kLBh
Bench Vise amzn.to/2QQbxBv
Propane Torch Kit amzn.to/2pqrBgW
Metal Picks amzn.to/2NxvrU7
JB Weld amzn.to/2O1Sxl9
Lacquer Thinner amzn.to/2ILdDPU
Scott Towels amzn.to/2DvZ0Rt
________________________________________
UK TOOLS
Camera Used For video
amzn.to/2uJJdHU
Venom amzn.to/2DSAauw
_______________________________________
Germany
TOOLS:
Camera Used for video
amzn.to/2IOESac
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this TH-cam channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS. - ยานยนต์และพาหนะ
*****Here we share with you how to repair your Door Check/Door Detent/Door Stop...no matter what you call it when it does not work it is a TRUE PAIN! Let's Begin and remember all the tools are in the SHOW MORE of the video description. Here is the other video on a different style of door check **th-cam.com/video/pofdJq2n-yE/w-d-xo.html** hope this helps our friends and we will see you on Sunday for the SWEET REVIEWS! How many Sweets will it receive?*****
Sweet Project Cars “Bam 💥 Done ✅ Good for another 20 years “ well said Mike 👍🏼
Thank you for all you do, Sir. I actually have a new one to install on my 2001 Chrysler Sebring Convertible. You are awesome my friend.
Anyone can buy new parts, but this is EXACTLY what I was looking for. Thank you so much!!
We're with you on that Tina! Save the cash and fix what you have :) Thank you for watching and sharing, glad we could help. mad Mike the hammer SPC
Came back to say thank you! I bought a 13-year-old Honda CR-V a few months ago. All four doors, annoyingly, wouldn't stay open if parked on any sort of incline. The rear left speaker also didn't work when I bought it, but that hasn't been annoying enough to get into the door. I got whacked in the head the other day though as I was bent over and pulling stuff out of the back seat. That inspired me to do a little homework and I came across your video here. In a little over an hour I had both rear door checkers working, and with a little more time discovered that the speaker terminals were just a bit corroded. Both problems fixed for $0.00... fantastic hack, and great video!
Awesome!! Thank you so much for watching and sharing, we truly appreciate it! Glad to have you here with us my friend. Keep up the great work! Have a fantastic day. mad Mike the hammer SPC
Yeah, this is a huge problem for me... All my dates keep escaping before our party really gets rolling. Thanks for the solution for this embarrassing problem. You guys rock!!! 😂😂😂😂
Thank you, saved me from wasting money. Easy fix and worked perfectly. I slipped tiny washers into mine.
Ted, so glad you had success! Have a fantastic day and thanks for sharing! mad Mike SPC
Just did this on my Mazda6 and the door stopper works fantastic again! Thanks a lot!
Your ingenuity is Mexican level, and that's a compliment.
Thank you very much! One of our employees, Hoolio Cesar Chavez, came up with this idea, so you are right on with that :) Have a great day Jorge! mad Mike the hammer SPC
Have you seen what they are up to in Pakistan though?
Thanks for the tip and the inspiration! My driver's door is now much better after inserting a couple of 3D-printed shims to make up for the worn nylon sliders - looked very similar design to the one you show here.
Nice work! Thanks for sharing my friend. Have a fantastic day! mad Mike the hammer SPC
After my door closing on my leg for a year, I found your video and fixed it today. I have an older car and was struggling to find a replacement stopper, so your idea to reposition the rubber piece was perfect. Thank you!!!
Great job! Glad we could help, Gerry, thanks for watching and sharing, hope you have a fantastic week my friend. mad Mike the hammer SPC
This is why I love TH-cam!
Thank for sharing!
Our pleasure! Thank you for watching Will, we really appreciate it. Have a great day my friend. mad Mike the hammer SPC
THANK YOU SO SO MUCH!! I appreciate you making this video so quickly after I emailed you!
You’re very welcome Jessica glad we could help
Man , this is awesome !
Great advices for repairing and not buying new door stoppers for about 100 $ !
This guy is the REAL DEAL 👍👍👍👍👍👍
Thats a genius idea, had a few cars in the past that did that, super annoying. Great tip SPC.
Thank you. Just repaired this part in a Nissan 350z. The concept is very similar and solved the problem by shiming with two coins between the case and rubber part. It worked great. Again thank you for your video!
Nice work! Glad we could help! Have a nice evening. mad Mike the hammer SPC
Wow Man you impress me and inspire me in every video you post to work on my cars . Great tip my friend can’t wait for next video 👌👏👍
Had me laughing when you said „this thing I’ll last another 20 years“🤘🇬🇧
Thanks! Glad you liked it. Have a great day. mad Mike the hammer SPC
My daughter's car needs this fixed. Thanks for the video. I don't have a vice but hopefully I can open it. I need to get some grease. Thanks again
Awesome repair- I like the FREE kind.
I cant tell you how much I value some of your tutorials. Thank you so much.
Thanks for this tip! My old C-10 beater needs this bad, the doors try to take a leg off if you're not careful...
Genius, maximum respect!
I bought one for the driver’s door and it was expensive. Thank you for this video because I have 3 others that need this done.
Glad we could help save you some $$$ Jeff!! Thanks for watching and sharing, have a great weekend my friend. mad Mike
When you close it back up there's no need to bend those little tabs back down super well, the screws will hold it together once installed.
you can of course do it how you like we are just sharing what works for us every time...thanks spc mike
Another great DIY. Thanks!
hey thanks for this one, never knew how to do that. now I know.
After seeing this video I think it's a good idea to open my new detents and grease them up good before taking the doors apart.
Great idea, my friend!
Yup, pretty sure the whole "door slamming shut and crushing your legs" thing comes standard on Subarus :). Thanks for the video.
It's not like Subaru doors are even heavy. Such an infuriating issue.
ALWAYS TEACHING TO HELP HARD WORKING AMERICANS!!!! THANK YOU VERY MUCH SIR MORE MONEY SAVED!
Hello from central europe and thank you for your amazing tip. Just did this on my Mazda 6 2002. I wish you good luck.
Glad it helped Ivan! Thank you so much for watching and sharing, we truly appreciate it. Happy to have you here with us :) Have a fantastic day. mad Mike the hammer SPC
I have the same issue in my honda. I will have to fix it now.
Sweet! Thanks for the tip! :)
Hey my friend another awesome video, was looking forward to watch this, can I ask you what if the door does not lock all the way without you pushing it? What do you do?
Great video. I’m going to do the repair myself. Thank you! Btw, Love the Spanish speaking friend.
Awesome! Thank you for watching and sharing, and we will let Hoolio know you gave him kudos! Have a great day my friend. mad Mike the hammer SPC
Thanks again for a great video!
I'm gonna try that! I looked for a repair B4 and nvr found one till now. Thanx!
Another awesome tip...I will be using this one soon!!!
Tony Neises good deal you will love the results my friend :)
Tried and it works. Thanks!
Excellent! Glad it helped! Thanks for watching and sharing. Have a great day. mad Mike the hammer SPC
Thank you so much. My mechanic said the part cost was $106 from Toyota.
Glad we could help Sidney! Thank you for watching and sharing, have a great week my friend. mad Mike
Yes that is right
We need to get back to taking
Care of our Cars
Save money and have fun
Thank you. (S P C)🇺🇸🇺🇸👍
Kool video. I will try this on my Rav4. Thanks.
You will love the results my friend have a great day thanks Mike Sweet project cars
Damn great video 👍
Excellent! My 08 civic door always shuts. I'll try this thanks
Rob Wright you will love the results my friend :)
This worked like a friggin charm! THANK YOU, saved my shins. lol
Excellent! Glad we could help save your shins Phyoomz! LOL, hope you have a great weekend, thanks for the view and sharing your results my friend. mad Mike the hammer SPC
Worked fantastic , except you can’t flip a Subaru. I just added a piece of sheet metal shim stock behind it. Might of taken me 1/2 hour for whole job. Thanks
Glad we could help Paul! Thank you for watching and sharing your fantastic results with everyone, hope you have a great rest of your week my friend. mad Mike
I can't wait for my door thingy to malfunction so I can test this out!
Come fix mine, then you don't have to wait pleaseeeeee.
Cool, and thank you very much.
Ive got a mk2 sedona and this was identical. All fixed no more banged legs when I park on a hill
matthew good deal glad we could help...spc mike
We will be doing this on a Toyota Auris Hybrid 2016 (it's known as Corolla in the US), let's hope it works!
Thanks for sharing. Have a great day. mad Mike the hammer SPC
another great tip
Thank goodness I have been looking forever to see how to I unlatched that part. Some people drill a hole in it?
Hope this helps Tien, thanks for watching. mad Mike the hammer SPC
Looks just like my 2000 Accord door checks that I just replaced ($17.06 L, $15.17 R. OEM). Could have saved a few $$ if I knew of this sooner. Oh well, good to know for future reference. Thanks again!
You’re correct they’re not that expensive but by doing these videos we share with people how they can become inventive to fix what they already have thank you for sharing have a great night
You friend are a Genious. Why pay $100 to $200 for this part when you can fix it for nearly free. Iv always wondered why this part goes bad.
Glad to help my friend! Thanks for watching and sharing. Have a fantastic day. mad Mike the hammer SPC
The best!
Awesome video thanks
Glad you enjoyed it! Thanks for the view and comment, have a fantastic rest of your week my friend. mad Mike
Exact subie holdopener that I fixed I used a shim 1/16 thick, instead of the flip. I like how you dont wastime tellin a story about say---- your cousin"s GF came over the shop in a slinky little sun dress, all sweaty, you could see right through the damn thing and she kept trying to get you to spray her with some cool water and use the EXTRACTOR on her, ya know bla bla bla like a lotta these folks
LOL thanks for sharing Mark! We like to keep things to the point here at SPC! Glad to have you with us, have a great day! mad Mike the hammer SPC
Loved the Spanish...gracias!
Our pleasure Js! Thanks for watching, have a great day my friend. mad Mike the hammer SPC
I have that problem with my 1982 Cutlass
I have a new 2018 Jeep and it doesn’t have these at all the doors are always shutting on us.
you rock ! thank you man !
Thank you very much my friend! Glad to help, hope you have a fantastic day. mad Mike the hammer SPC
Any ideas on a 93 Toyota T100 door that dosen't close nice and snug besides slaming it everytime...Thanks for the vids
Well it sounds like you have a hinge issue. to save yourself a boatload of time, stop by your local autobody repair shop they will tell you in 2 seconds for free what you need to do to fix it. Hope this helps have a great day. mad Mike the hammer SPC
Great video, i have a problem. Today the mechanics at the Toyota dealership added Grease to the metal hinge because I was complaining that my door made a tapping sound when it's fully open so I guess they thought this would be a solution but it still made the sound apparently all the car models that I have make the same sound when opening they couldn't figure that out first so now my doors open completely out before they used to have a nice stop at every angle this car only has 10,000 miles and the stops were great because if you're on a hill they open up to a certain degree if you're down a hill they open up to the certain degree prevents you from hitting fire hydrants trees etc and now they just have grease and they open way too lightly and too fast so how can I counteract this issue I could take it back to the dealer but I'm trying to avoid them taking the whole door apart just to get into that hinge and clean it out is there another way to do so can I buy like a degreaser or something but I don't want to damage any components inside the hinge if this is really something for the mechanics it just tear apart and clean inside out then I guess I have to resort to that but before I even do that I want to see if I could maybe try another alternative because I know once they start opening things up if they put in reassemble the door again I feel like something is going to be rattly or loose I've been through this before with my windows rattling and the doors just never the same I don't want to violate the assembly yet please suggest any tips I am looking to remove the grease off the metal hinge or the door jamb hinge whatever is called forget my ignorance please help thank you anyone
Get this amzn.to/3wIDQHd and one of these amzn.to/3FzDoiL and apply it as you are moving the door back and forth until it is free of the debacle that is your door my friend. Thank you for watching and asking, have a great day and all the best on your project Carlos. mad Mike the hammer SPC
Thank you 🙏
Any time Abe! Thank you so much for watching and commenting, we really appreciate it. Hope you have a great weekend. mad Mike the hammer SPC
that was genius stuff! just one doubt, do I flip both rubbers (top & bottom) or either one will do?
Do one and see if it helps, if not do both my friend. Thanks for watching and asking, have a great day. mad Mike
@@SweetProjectCars thank you so much
Ha! I like this guy!
Thank you very much!! We like all of our viewers too :) Thanks for watching, hope you have a great day my friend. mad Mike
My 2006 Escape doors are swinging like they're unhinged, this is what I've been looking for! Much needed information. Thank you. I was going to throw you a couple of kisses but being a man I'll get my girlfriend to do it for me:)
I have the same car. Yeah so hopefully I can fix it. I'm scared.
@@peety6323 did you do it?
Does this procedure work on Ford-brand door check assemblies??
If your hinges look like the ones in the video, then that's a big fat yes. Thanks. mad Mike the hammer SPC
I have a 2004 pontiac grand prix, ok, explain this one please.
We will see what we can do for you my friend
Hi there....👏👏👏👏👏👏👏👏👏👏
Where do you get that little square thingy? How is it called? Where did you get it?
It's this amzn.to/3nIvx8s and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC
Can you use it on toyota prius late 2008 model? Uk spec.
Give it a shot! You have all to gain and nothing to lose my friend. Thanks for the view, have a great week. mad Mike & team
Do you have any idea how much time these things last for.? In my Honda its totally gone just in 46K KMS, whereas in my VW that thing still works even after 70k kms.
It depends on many factors like usage and quality of original parts. Thank you for watching and sharing. Have a great day Anirudh. mad Mike the hammer SPC
This woukdnt fix my problem bcuz the plastic housing (black part u greased &said not to touch or eveything woukd fall out) (what u melted thru in "temporary" fix) is broken/snapped in half
Yes if it’s broken in half you have to replace it with new
cool
I have a question you never said what are you going to do like you from that you were pushing in
seksek not sure what you mean?
Good sir, I have been looking for a video where you treated windshield washer fluid, I cannot find that video. You surely know what I'm talking about so can you please link me that. Thank you
amritGAMINGYT do you mean this th-cam.com/video/_roafGwUvq0/w-d-xo.html
Yes. thats exactly it. thank you. also i might have to consider your wheel cleaning concoction, since I just found out Meguiars Wheel Brightener doesn't sell in Canada :(
amritGAMINGYT we will have it on our website very soon
@@SweetProjectCars to buy?
amritGAMINGYT not sure what you mean my friend :)
At 4:48 that was a good one : ) Great video
I don't know if I am the only one but you keep saying "it" is "it" called a Rubber module if not what is the that rubber square called? Do you have a part number that I missed or other name that I missed? Can you provided a link for the rubber square that you installed for the door check to not close? I hope this is not a dumb question.
Thank you!
the rubber module is in the door detent already you just flip it around as per the video if the rubber is missing or damaged you will need a new detent.
@@SweetProjectCars WOW! Talk about a fast response time! Also thank you for clarifying. That does make more sense and it was a great and informative video.
you are very welcome my friend
What kind of rubber I can use to do this ?
What type of doorstop do you currently have? Please send us a pic to sweetprojectcars@gmail.com and we will see if we can get you pointed in the right direction Cica. Thanks for watching, have a great weekend. mad Mike the hammer SPC
is this why my door swings open in the wind?
What vehicle did you do this to?
A 1999 Grand Marquis. Thanks. Have a great day. mad Mike the hammer SPC
Is that grease safe on rubber ?
It sure is. Thanks for asking and watching. mad Mike the hammer SPC
What do you do with the type that is part of the hinge?
Cbmech we have this video th-cam.com/video/pofdJq2n-yE/w-d-xo.html and then we will be doing one more on the spring type hinge soon
Thanks much , I will be doing this repair on my mustang today
Thanks anyway, I don't need it now I just spun a rod bearing 😔
Cbmech thats too bad my friend I have had that happen and its no fun
Is this an altima? If yes what's the year?
If you are looking for the right replacement door stops, go to your dealership parts department and they will help you out M C. Thanks for watching, have a great day. mad Mike the hammer SPC
What if mines is a little long?
It will work the same, you may have to put bigger shims in. Thanks for watching and asking Tien. Have a great weekend my friend. mad Mike the hammer SPC
Where can I find that rubber piece you wedged in there?
That’s the trick just look around you never know what you can stuff in there that just happens to be laying around your shop thanks for your question have a great day mad Mike sweet project cars
Yes but how do you take that part out of car itself?
remove the 2 bolts on the door and the 1 bolt on the door jam and you are good to go
@@SweetProjectCars You don't have to remove the door panel?
@@triforceofpizzza some vehicles will require door panel removal... Toyota for example
yes in most cases you have to remove the door panel my friend
@@SweetProjectCars Ok good to know. Thanks!
what name this item?
This amzn.to/3nIvx8s Thanks for watching and asking. Have a great day my friend. mad Mike the hammer SPC
Don't forget about the Spring Type..
Dave oh that will be coming soon my friend :
)
Thought you just might.. I enjoy your Articles...
⚡︎
I am going to rename you (SAVE MORE MONEY)!
LOL, thanks Ray, it's our pleasure to help my friend. Have a fantastic day. mad Mike the hammer SPC