Hell yeah! BTW, currently setting up my RMX to have similar settings and alignment to Project RTR. It’s funny that no matter what happens to that Project, people still go back to it and it inspires so many newbies that have an RMX RTR to chase after what I thought was a pretty hectic build. Would love to see an update on where it is today. Also, what happened to Fast Factory? The only major conversions available for the RMX are the DES Volcano and the Team Jordan Beast Mode 420. I wanted to eventually get the same conversion chassis but because I couldn’t get one, I bought the Hobbywing XD10/D10 combo instead.
You’ve also got Razr performance for RMX conversion! Idk what happened to FF but hopefully they will return. If I didn’t have the FF conversion I’d get a beast mode (I have 3 now) or the razr as razor is synonymous with good performance!
Also, we kind of updated people on the two projects that took the place of project RTR. It was the beast mode FXX video and this one th-cam.com/video/btaBFd3Ipbc/w-d-xo.htmlsi=rtG_g2cBaLPRKmFm
Possibly a chance to do a review if someone sends us one! For now we have some other projects (redcat and reve d) moving in the background! Coming soon!
It’s been under the knife and getting a new video made. It’ll be back, have no fear. Just been slow getting anything new to release from redcat for the cars.
Shimmed the chassis plate mounts a few mm and swapped for slightly longer screws. Same trick has worked for me on numerous chassis that can have that same issue such as the Usukani’s.
Tasty Looking MD SS Did You get the ReveD Servo To Fit using taller Yokomo Servo Holders or spacers on the lower deck ? I can't seem to see Spacers under the ReveD Servo in the video. I used 3mm spacers on top of the Stock Yokomo Servo Mounts and then made a slight Dremel cut in the upper carbon supports to allow the servo arm to fully swing left and right without hitting the upper rails. My Only complaints about the MD are the original Manual has mistakes and terrible settings (☹) and that the slide rack needed shimming on one of the bearing mounts to get rid of play up and down play on one side (left side) in the steering rack , Also Hunting was a bit of an issue until I raised the damping point to over 300. Now its the best handling car I have , The Grip even with the 3 gear setup is amazing We'd love to see Your Servo Settings and could You share Your front end link settings please :) , Thanks for the Upload
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
Thats a killer chassis
Thanks @lexeg1
I'm here for the sneak peek! Another killer video Jordan.
Let's gooo.
Love a nice S chassis build
Sick!!!
AWESOME
YES ANOTHER VID FROM SS
🔥 build. Awesome video. Always leave learning something new!!
Hell yeah she’s a ripper! Looks awesome as well! Always happy to help and get some laps!!
Hell yeah bro let’s do it again on the next!
sooo good would love to see the front vents cut open snd maybe lights to 0o0o
Ah yes, more to come🔌
Hell yeah! BTW, currently setting up my RMX to have similar settings and alignment to Project RTR.
It’s funny that no matter what happens to that Project, people still go back to it and it inspires so many newbies that have an RMX RTR to chase after what I thought was a pretty hectic build. Would love to see an update on where it is today.
Also, what happened to Fast Factory? The only major conversions available for the RMX are the DES Volcano and the Team Jordan Beast Mode 420. I wanted to eventually get the same conversion chassis but because I couldn’t get one, I bought the Hobbywing XD10/D10 combo instead.
You’ve also got Razr performance for RMX conversion! Idk what happened to FF but hopefully they will return. If I didn’t have the FF conversion I’d get a beast mode (I have 3 now) or the razr as razor is synonymous with good performance!
Also, we kind of updated people on the two projects that took the place of project RTR. It was the beast mode FXX video and this one th-cam.com/video/btaBFd3Ipbc/w-d-xo.htmlsi=rtG_g2cBaLPRKmFm
Another great vid! 🙌
Any plans for a review of the MST RMX-M chassis? 🤔
Possibly a chance to do a review if someone sends us one! For now we have some other projects (redcat and reve d) moving in the background! Coming soon!
haha LOL. I'm very curious about the M-Drift platform but also excited to see what you have coming. Thanks for all the great content! 🙃 @@ScaleScience
I’m fixing to buy a md 1.0 as well. I mean it’s used but still. I can’t wait
One of my personal favorites! Love how easy it is to tune
How big is the room your track is set up in??? Trying to get a feel for how big most tracks are...
About 40’ x 26’
What happened to the Redcat Rds box stock build?
It’s been under the knife and getting a new video made. It’ll be back, have no fear. Just been slow getting anything new to release from redcat for the cars.
How you get the rs-st servo to fit cuz it seemed like it was too big
Shimmed the chassis plate mounts a few mm and swapped for slightly longer screws. Same trick has worked for me on numerous chassis that can have that same issue such as the Usukani’s.
@@ScaleScience can you make a video on it plz because I tried and the servo horn hits the top deck🙏🙏🙏
@@haroldthompson4453rather than make a video on something like that, just join our fb group (Scale Science RC) or send us a message.
Tasty Looking MD SS Did You get the ReveD Servo To Fit using taller Yokomo Servo Holders or spacers on the lower deck ?
I can't seem to see Spacers under the ReveD Servo in the video.
I used 3mm spacers on top of the Stock Yokomo Servo Mounts and then made a slight Dremel cut in the upper carbon supports to allow the servo arm to fully swing left and right without hitting the upper rails.
My Only complaints about the MD are the original Manual has mistakes and terrible settings (☹) and that the slide rack needed shimming on one of the bearing mounts to get rid of play up and down play on one side (left side) in the steering rack ,
Also Hunting was a bit of an issue until I raised the damping point to over 300. Now its the best handling car I have , The Grip even with the 3 gear setup is amazing
We'd love to see Your Servo Settings and could You share Your front end link settings please :) , Thanks for the Upload
I’ll try to get you some settings for servo. I did just shim the gaps created by the taller servo and sent it.