Big thanks for your Corro-Protec review! Highlighting water heater maintenance is crucial, especially as prices climb. A heads-up to our viewers: Corro-Protec prevents future corrosion but can't reverse existing corrosion on older tank. Good news - it's reusable on a new heater if you ever change it, ensuring ongoing protection. Appreciate your insights!
@@incognito3743 It's important to adhere to your water heater's manual recommendations, which often include an annual tank flush. While our Corro-Protec system significantly cuts down on sediment buildup, it doesn't eliminate it entirely. Staying on top of this maintenance ensures your water heater operates efficiently.
Will the Cheaper Powered anode rods that they sell on Amazon work just as well as the More expensive "double the price" units Corro-Protec sells . I have not found a compare video on these different powered anodes
I am not sure and its hard to say. In this case I would recommend checking the manufactures warranty and go with the one with the longest warranty. Usually you get what you pay for.
Corro-Protec's powered anode rods are engineered to last over 20 years, safeguarding one of the most crucial appliances in your home. If you're considering cheaper alternatives, it's essential to weigh the absence of a warranty and quality control. Investing in Corro-Protec means securing long-term protection with a product backed by a 20-year warranty, ensuring peace of mind for your water heater's longevity and efficiency.
Must be a regional thing. In my field, the word anode comes up a lot, and EVERYONE says it with a long O. This guy saying anAHd sounded really wrong to me.
I have an AO Smith water heater from 2015 and I am unable to remove the anode rod. I have tried breaker bars, and 1/2”impact wrench and I can’t seem to break it loose. I am not going to purchase another AO Smith. They apparently have 2 classes of heater and I must have gotten mine through the big box cheaper variety. Oh well. Any advice before I throw the water heater out and put a new one in? Thanks for any advice you have for this DiY homeowner.
I would NOT trash a water heater just because you can't pull out the anode rod. I would ONLY replace a WH if its leaking or if it will not light off. If I were to pull out the anode rod, I would soak the threads with penetrating fluid and try with breaker bar and cheater. if that did not work, I would stop and just live with the installed anode rod and forget about it.
@@KenTraining maybe you are right. I have read about penetrating oil but have been nervous to use it with potable water. Tomorrow the guy who installed it will be here to try. Thanks again
Bradford white makes a hot side nipple with the anode built onto it. You could add that if you can remove the existing nipple and you have the vertical space
If you can get an anode for $20-30 and you don't mind doing the maintenance, go for it. On my old Bradford White, I just spent $103.25 on an anode, a heat trap, tax and shipping. It will need to be switched out in 3-5 years, if not sooner. The Corro-Protec is looking pretty attractive to me. My water heater is in a cabinet that I have to disassemble to change the anode, so that's another thing in favor of the powered anode.
If you're seeking more comprehensive proof of the technology behind our powered anode rods, I recommend exploring research on "impressed current cathodic protection." This technology is widely used for protecting ships, pipelines, water towers, and more against corrosion on a global scale. There's a wealth of scientific and industrial research available online that demonstrates its effectiveness and long-standing reliability in various applications. This same principle is what makes our powered anode rods so effective for water heater protection. Feel free to dive into this research to gain a deeper understanding of how well-established this technology really is.
Buying a magnesium anode rod within the $40 range that lasts from 3 to 5 years remains the cheaper option. When considering the cost of an electric rod at $160, it equates to replacing four regular anodes. Assuming the purchase of a 12-year warranty water heater version new, starting the replacement of the original rod at the 5-year mark = 5+3+3+3+3 19 years. By then probably replace water heater.
Big thanks for your Corro-Protec review! Highlighting water heater maintenance is crucial, especially as prices climb. A heads-up to our viewers: Corro-Protec prevents future corrosion but can't reverse existing corrosion on older tank. Good news - it's reusable on a new heater if you ever change it, ensuring ongoing protection. Appreciate your insights!
Do you recommend to do annual flush after the Corro-Protec install?
@@incognito3743 It's important to adhere to your water heater's manual recommendations, which often include an annual tank flush. While our Corro-Protec system significantly cuts down on sediment buildup, it doesn't eliminate it entirely. Staying on top of this maintenance ensures your water heater operates efficiently.
Will the Cheaper Powered anode rods that they sell on Amazon work just as well as the More expensive "double the price" units Corro-Protec sells . I have not found a compare video on these different powered anodes
I am not sure and its hard to say. In this case I would recommend checking the manufactures warranty and go with the one with the longest warranty. Usually you get what you pay for.
Corro-Protec's powered anode rods are engineered to last over 20 years, safeguarding one of the most crucial appliances in your home. If you're considering cheaper alternatives, it's essential to weigh the absence of a warranty and quality control. Investing in Corro-Protec means securing long-term protection with a product backed by a 20-year warranty, ensuring peace of mind for your water heater's longevity and efficiency.
at least you pronounce ANODE correctly
Must be a regional thing. In my field, the word anode comes up a lot, and EVERYONE says it with a long O. This guy saying anAHd sounded really wrong to me.
I have an AO Smith water heater from 2015 and I am unable to remove the anode rod. I have tried breaker bars, and 1/2”impact wrench and I can’t seem to break it loose. I am not going to purchase another AO Smith. They apparently have 2 classes of heater and I must have gotten mine through the big box cheaper variety. Oh well. Any advice before I throw the water heater out and put a new one in? Thanks for any advice you have for this DiY homeowner.
I would NOT trash a water heater just because you can't pull out the anode rod. I would ONLY replace a WH if its leaking or if it will not light off. If I were to pull out the anode rod, I would soak the threads with penetrating fluid and try with breaker bar and cheater. if that did not work, I would stop and just live with the installed anode rod and forget about it.
@@KenTraining maybe you are right. I have read about penetrating oil but have been nervous to use it with potable water. Tomorrow the guy who installed it will be here to try. Thanks again
Bradford white makes a hot side nipple with the anode built onto it. You could add that if you can remove the existing nipple and you have the vertical space
@@brianii5809 thanks. I just had the plumber install a Bradford White. It seems to built better than the previous AO Smith. Time will tell.
What is a an nod rod?
Anode Rod
For that kind of money ($160) I'll do my maintenance every 3-4 years. Using an anode costing $20-$30 bucks. Pretty aggressive pricing if you ask me.
If you can get an anode for $20-30 and you don't mind doing the maintenance, go for it. On my old Bradford White, I just spent $103.25 on an anode, a heat trap, tax and shipping. It will need to be switched out in 3-5 years, if not sooner. The Corro-Protec is looking pretty attractive to me. My water heater is in a cabinet that I have to disassemble to change the anode, so that's another thing in favor of the powered anode.
I actually need a powered aNODE rod rather than an aNOD rod. Do you know where I could get one?
Amazon
wheres the proof . ive done search after search and i can find anyone that has used one for even 5 years!
proof i need proof!
I will give you the proof in 2043
If you're seeking more comprehensive proof of the technology behind our powered anode rods, I recommend exploring research on "impressed current cathodic protection." This technology is widely used for protecting ships, pipelines, water towers, and more against corrosion on a global scale. There's a wealth of scientific and industrial research available online that demonstrates its effectiveness and long-standing reliability in various applications. This same principle is what makes our powered anode rods so effective for water heater protection. Feel free to dive into this research to gain a deeper understanding of how well-established this technology really is.
Buying a magnesium anode rod within the $40 range that lasts from 3 to 5 years remains the cheaper option. When considering the cost of an electric rod at $160, it equates to replacing four regular anodes. Assuming the purchase of a 12-year warranty water heater version new, starting the replacement of the original rod at the 5-year mark = 5+3+3+3+3 19 years. By then probably replace water heater.
You are correct, But I wanted to set it and forget it. One and Done!
It would be better to have a stainless steel water heater then you wouldn't need a anode rod at all.
@@Boodieman72 Do those exist? At a reasonable price?