How to clean out your PW80 carb!

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ต.ค. 2024

ความคิดเห็น • 23

  • @broncofa
    @broncofa 4 ปีที่แล้ว +5

    Nice. I usually take off the carb and it's a pain in the rear to get in/out - detach/reattach the throttle cable/choke. Just loosening the carb and rotating it is genius, thanks.

    • @ih302
      @ih302 3 ปีที่แล้ว

      Yep, that was ingenious, I did it with my son's p-dub and it worked great, much better than pulling the carb.

  • @LouieLouieUSMC
    @LouieLouieUSMC 3 ปีที่แล้ว +1

    Hey thanks for the vid. Have a question for u. I just bought one for my son. Its used. Already did what u showed on here. I dont know much about those pw80s. I have seen vids to put oil in the bike where it says yamaha just above the foot brake. Then i have seen some guys put tranny oil in there. Which is it? And also what kind of oil goes under the seat? Thanks a bunch.

    • @BennyObscene
      @BennyObscene  3 ปีที่แล้ว +1

      two-strokes like the PW80 run off a mixture of gas and oil. unlike your weed wacker though, the PW80 has a separate oil pump which allows you to put straight gasoline in the fuel tank. so you put two-stroke oil under the seat, and the pump will automatically mix it into the engine. some people don't trust the pump, so they delete it and put a gas/oil mixture into the fuel tank.

    • @ingleberthumperdink9455
      @ingleberthumperdink9455 3 ปีที่แล้ว

      Back away from the bike

  • @aidentully70
    @aidentully70 2 ปีที่แล้ว +1

    What should I use to clean it if I don’t have carburetor clean spray

  • @josephkim5999
    @josephkim5999 4 ปีที่แล้ว +2

    Would this be good to do to my sons bike its been sitting for about 4 yrs idk if it will even turn over i bought a carburetor rebuild kit hope it works thanks for the video

    • @BennyObscene
      @BennyObscene  4 ปีที่แล้ว

      For that situation you might be best off completely removing the carb and giving it a proper rebuild

    • @helloo7984
      @helloo7984 4 ปีที่แล้ว

      @@BennyObscene thx for the help

  • @mark07021988
    @mark07021988 4 ปีที่แล้ว +1

    Nice video

  • @ih302
    @ih302 3 ปีที่แล้ว +2

    You can also just turn the gas off and rut the carb dry... less mess that way.

    • @ingleberthumperdink9455
      @ingleberthumperdink9455 3 ปีที่แล้ว

      And you can also just shut the hell up and let him do it his way... less bullshit that way

    • @ingleberthumperdink9455
      @ingleberthumperdink9455 3 ปีที่แล้ว

      And you can also just shut the hell up and let him do it his way... less bullshit that way

    • @ih302
      @ih302 3 ปีที่แล้ว

      @@ingleberthumperdink9455 chill dude...

    • @ih302
      @ih302 3 ปีที่แล้ว

      @@ingleberthumperdink9455 Chillax dude, it was just a suggestion of another way to accomplish what was done in the video, for the benefit of those reading the comments.

  • @bindig1
    @bindig1 3 ปีที่แล้ว +2

    You really should wear safety glasses when using that carb spray

  • @jameswilliams1621
    @jameswilliams1621 4 ปีที่แล้ว +1

    If anybody ever sees this can you please tell me if you flip the switch up or flip it down on the right handle to start it. Thank you!

    • @BennyObscene
      @BennyObscene  4 ปีที่แล้ว +1

      Flip up

    • @jameswilliams1621
      @jameswilliams1621 4 ปีที่แล้ว

      Benny Obscene that’s what I thought. Because I’m rebuilding my buddies 80. So I did the carb yesterday and this video really helped!!! Thanks again!

  • @Motolife92
    @Motolife92 8 หลายเดือนก่อน

    Where dose the lines from the cab go to ?

    • @BennyObscene
      @BennyObscene  8 หลายเดือนก่อน

      which lines?

  • @seank1677
    @seank1677 4 ปีที่แล้ว

    what type of 2 cycle oil used for bike?

    • @Farout397
      @Farout397 3 ปีที่แล้ว

      Yamalube 2S $8.99 USD here in Arizona. Which is a good price.