Home made PCB using Mini CNC 1.5 W laser engraver

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 27

  • @chronobot2001
    @chronobot2001 2 หลายเดือนก่อน +1

    Looks just like the boards professionally produced in the 70s and early 80s
    Very nice diy results.
    Bravo !

  • @MarshallMcFarlin
    @MarshallMcFarlin 4 หลายเดือนก่อน +1

    Absolutely the best technique yet no more stinking runny uneven paint or waiting for it to dry. Thank you 🎉🎉🎉😂😂😂❤❤❤❤.

  • @anderelectronics740
    @anderelectronics740 8 หลายเดือนก่อน +1

    I make my pcbs cutting by hand, I definitely need to build this cnc machine. Great idea.

  • @ajaipal1
    @ajaipal1 5 หลายเดือนก่อน +1

    nice and smart idea.
    you could have done a second pass.
    also leaving some copper would have saved on the etching sollution.
    just my thoughts.

  • @petermuller608
    @petermuller608 10 หลายเดือนก่อน +1

    Nice idea! Would have preferred having warnings with regards to the materials used. Some of those sheets contain materials which release quite nastiy fumes when laser cut

    • @electronicsandinventions5919
      @electronicsandinventions5919  10 หลายเดือนก่อน +1

      Thank you for the note

    • @AB-pb8oo
      @AB-pb8oo 7 หลายเดือนก่อน

      chlorine fumes from burning pvc film promptly destroy the laser lens, it becomes matte

  • @andrericardobarbozapereira
    @andrericardobarbozapereira 9 หลายเดือนก่อน +1

    Your video is super cool, I've always wanted to make plates like this, could you send me the project of your CNC laser or make a video of how you assembled it, the software you use and the program to convert the drawing into gcode?

    • @electronicsandinventions5919
      @electronicsandinventions5919  9 หลายเดือนก่อน +1

      Thank you,
      The program used for drawing the circuit is PCB Wizard and the program used to change the drawing to G-code and to control the CNC is Benbox Laser Engraver.
      A homemade CNC video is on the list of future projects, and I will make a detailed video later on.

  • @b139b
    @b139b 11 หลายเดือนก่อน +1

    Thanks for your video. What Speed and Powersettings did you use for your 1,5W laser?

    • @electronicsandinventions5919
      @electronicsandinventions5919  11 หลายเดือนก่อน

      Speed 80 , full power.
      It also depends on the thickness of the sticker laminating tape. it is better to try your setting on a small sample before starting your pcb. Maybe you need different settings.
      Best Regards

  • @jmsian3505
    @jmsian3505 ปีที่แล้ว +1

    thank you for posting. what is the sticker made of?

  • @stevepreskitt283
    @stevepreskitt283 11 หลายเดือนก่อน +2

    Great idea, but be absolutely sure the self-adhesive sheet isn't made from PVC or other chlorine-containing polymer. Laser cutting PVC and similar materials will release chlorine gas (which is not good for you), and also gaseous hydrochloric acid (which is not good for either you or the cutter). Even with sufficient venting, these by-products can be harmful to you and your equipment.

  • @valentinoagostinho7043
    @valentinoagostinho7043 ปีที่แล้ว +1

    👏👏👏👏👏🙆🏿‍♂️🙆🏿‍♂️🙆🏿‍♂️ So good

  • @HK-uq9by
    @HK-uq9by 8 หลายเดือนก่อน

    How much is the machine?

    • @electronicsandinventions5919
      @electronicsandinventions5919  8 หลายเดือนก่อน +1

      It's better to build the CNC by yourself, a new one, I think around 100~150 $

  • @MrMghobashi
    @MrMghobashi 2 ปีที่แล้ว +3

    الله ينور 👍🏻

  • @victoriaPCB2
    @victoriaPCB2 10 หลายเดือนก่อน +1

    👍

  • @nibiru3675
    @nibiru3675 9 หลายเดือนก่อน

    software pcb ?