😂 definitely NEVER DRY SAND AND DONT DO IT WITH 280 grit sandpaper especially. You need like 350 minimum 400-450 is what you want. You gotta get soap and water and sand with that… or water at the minimum. Trust. white zinc rich or cold zinc primer. Takes long to dry but worth the effects. To fix this you might be able to fix those scrapes from the thicker sandpaper, use “self etching for metal” spray paint it’ll say it on the front. Use that after primer, it’ll fill those imperfections same with the zinc primer it settles more slowly and evenly but be careful n wear a mask or u can really get sick
thanks for the pro tips but I tried wet sanding steel frames before and it gets yellowish after a few minutes yes self etching primers is much better for bare metals but much more expensive any paint high or low priced quality can still be chip off if you crash on brick walls🤣
Nagiikot lagi to sa Arcovia Pasig to pag hapon
Lupet mo tlga idol
salamat
Early gaganda ng repaint mo idol
salamat!
Sweet result!😎👌
Thanks!
Idol ❤️🙏
thanks
👌👌
Steel frame din po ung mtb ko pwede po kaya primer gray lng ipang paint ko?
pwede naman, pero kung may budget ka, atleast epoxy primer lamang
Pwede ba bosny primer gray gamitin
pwede po
@@chrisworxcustoms ok po thanks
@@chrisworxcustoms bat po pala need pa ng surfacer paint
@@boosterttteamjomalagu7247 additional layer para di madaling numipis ung pintura kasi lilihain pa bago kulayan
Di ba po una primer..then surfacer.. tapos silver then ung pink tapos clear gloss paba
3rd 😘
thanks!
Pag iniistrip ang pintura sa steel, ano ba dapat gawin at dapat hindi gawn?
wag mo babasain
lacquer thinner pang banlaw
dry sand lang gawin kapag wala ng pintura
@@chrisworxcustoms ahhhh, ilan po cans dapat bilhin para po sa primer,paint at clear coat
anong framr?
di din alam nung may ari
😂 definitely NEVER DRY SAND AND DONT DO IT WITH 280 grit sandpaper especially. You need like 350 minimum 400-450 is what you want. You gotta get soap and water and sand with that… or water at the minimum. Trust. white zinc rich or cold zinc primer. Takes long to dry but worth the effects. To fix this you might be able to fix those scrapes from the thicker sandpaper, use “self etching for metal” spray paint it’ll say it on the front. Use that after primer, it’ll fill those imperfections same with the zinc primer it settles more slowly and evenly but be careful n wear a mask or u can really get sick
thanks for the pro tips
but I tried wet sanding steel frames before and it gets yellowish after a few minutes
yes self etching primers is much better for bare metals but much more expensive
any paint high or low priced quality can still be chip off if you crash on brick walls🤣