That hose is part of the PCV system. If fuel is coming out of that, I would check for a stuck needle valve that won't close or a float that is filled with fuel. You might also want to check your oil level and also see if it smells like fuel. Cheers
Have you tested your AVR? Voltage regulator. I would suggest looking up a guy on TH-cam called James Condon. His channel is the best around for anything generator related. Cheers
@@brantsmallenginerepairs cheers pal. I have a generator (different than the one in this video) but..... It has a leak on the carb, basically the fuel inlet pipe that the fuel line connects too is leaking, I can remove that pipe with my hand although I shouldn't be able too. It stays in position and doesn't fall off but it obviously isn't air tight hence why it's dripping fuel so my question is, do you know what I can use to seal it to stop the leaking? I know the easier option would be to buy a new carb but my generator works perfect and is a cheap one but it serves the purpose I need. It seems pointless buying a new carb if I can fix this one and if I did buy a carb then it wouldn't be as cheap as it were. I bought it for £30 off boot sale, it didn't work but I've managed to get it up and running and the only thing wrong is the leaking carb, I'd rather fix than buy new wherever possible if I can. Sorry for the long reply but I really hope you understand and I really appreciate you taking the time to message me
You will have to get an epoxy that is fuel resistant. Something like this. www.amazon.ca/Weld-8272-MarineWeld-Marine-Epoxy/dp/B000KKPFFA/ref=asc_df_B000KKPFFA/?tag=googleshopc0c-20&linkCode=df0&hvadid=292950034231&hvpos=&hvnetw=g&hvrand=9848166121512417944&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001042&hvtargid=pla-422572943945&psc=1 If you do this, put a thin layer and don't just gob it on there. I have never tried this and don't know if it will work. You could probably get a cheap replacement carby for not much more. Good luck and let me know how you make out.
![[กูเพิ่งซื้อมึงปิดหนี] 20 นาที ผมรีวิวเกมที่แย่ที่สุดในโลก CONCORD](http://i.ytimg.com/vi/XhC-3q3Ii7I/mqdefault.jpg)
Excellent video and thorough explanation. Thank you for sharing
You are a good teacher, very detailed instruction. Thank you. New subscriber.
Appreciate the sub and kind words. Take care
Good job and a easy fix.
Got to love those easy ones. Makes up for the ones that are a PITA. Thanks for watching. Cheers
Love your videos thanks
Glad you like them! Thanks for watching and taking the time to leave a comment. Cheers
Merry Christmas and Thank You’ll for videos and information
Thanks for the kind words Phillip. Wish you and your family a safe and happy holiday season! Cheers
Thanks Brant
You're welcome. Thanks for watching. Cheers
Brill. Very helpful 👌 🙏
Glad I was able to help. Cheers
If you own a gas generator you should have a extra carb and tools to quickly charge out carb
Good tip. Thanks for watching and taking the time to leave a comment. Cheers
My problem was the needle not seating properly.
That will do it also. Thanks for watching and taking the time to leave a comment. Cheers
What if the gas is leaking from the air intake hose that comes from the engine into the air filter?
That hose is part of the PCV system. If fuel is coming out of that, I would check for a stuck needle valve that won't close or a float that is filled with fuel. You might also want to check your oil level and also see if it smells like fuel. Cheers
Is there a gasket sealer I can use for the bowl where it meets the body of the carb and at the bowl nut?
I would just order a new bowl gasket. They are only a few dollars. Thanks for watching and taking the time to leave a comment. Cheers
do you know if this fix will work for other Firmen models?
If the carb bowl is not lined up properly, this fix will work regardless of manufacturer. Thanks for watching. Cheers
👍🏼
Thanks
my firman gen will not put out without flashing it have changed almost everything what am i missing
Have you tested your AVR? Voltage regulator. I would suggest looking up a guy on TH-cam called James Condon. His channel is the best around for anything generator related. Cheers
@@brantsmallenginerepairs yes changed all of that . finally changed rotor
@@johnwest482 glad you got it figured out. Thanks for the update. Cheers
Hey buddy I know this video is 9month old but I have a question if you wouldn't mind trying to answer for me?
Absolutely. Shoot.
@@brantsmallenginerepairs cheers pal. I have a generator (different than the one in this video) but..... It has a leak on the carb, basically the fuel inlet pipe that the fuel line connects too is leaking, I can remove that pipe with my hand although I shouldn't be able too. It stays in position and doesn't fall off but it obviously isn't air tight hence why it's dripping fuel so my question is, do you know what I can use to seal it to stop the leaking? I know the easier option would be to buy a new carb but my generator works perfect and is a cheap one but it serves the purpose I need. It seems pointless buying a new carb if I can fix this one and if I did buy a carb then it wouldn't be as cheap as it were. I bought it for £30 off boot sale, it didn't work but I've managed to get it up and running and the only thing wrong is the leaking carb, I'd rather fix than buy new wherever possible if I can.
Sorry for the long reply but I really hope you understand and I really appreciate you taking the time to message me
@@brantsmallenginerepairs its the pipe that is shown in your video thumbnail with the red arrow pointing at it
You will have to get an epoxy that is fuel resistant. Something like this.
www.amazon.ca/Weld-8272-MarineWeld-Marine-Epoxy/dp/B000KKPFFA/ref=asc_df_B000KKPFFA/?tag=googleshopc0c-20&linkCode=df0&hvadid=292950034231&hvpos=&hvnetw=g&hvrand=9848166121512417944&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001042&hvtargid=pla-422572943945&psc=1
If you do this, put a thin layer and don't just gob it on there. I have never tried this and don't know if it will work. You could probably get a cheap replacement carby for not much more. Good luck and let me know how you make out.
@@brantsmallenginerepairs cheers buddy I will definitely have a look much appreciated 🙂