Thank you so much for this video!!!!! My key would not come out of the cylinder in PARK after turning the engine off. The key turns fine but would not release out. A lot of other videos and online forums talk about the switch under the steering wheel but it did not solve the issue, this video however did 100% solved my issue!!! I took apart the center console and took out the part, cleaned it, lubed it, and re installed and it worked fine for like 2 months but it then started to act up again and would not let me take the key out so I bought a new one from Amazon the part name is "ACDelco GM Genuine Parts 88967140 Shift Interlock Solenoid" and took the console apart again and installed the new part and BANG works like new.
I don't know yet if this will fix the problem on my trailblazer, but I want Cody the car guy to know, but he's the only one that explained what the problem was. The other handful of videos I watched before getting to this one, gave ways to work around it and not fix or describe the problem as to why it will not release the key everybody talks about this release button that's right up by the key on the column inside of the steering wheel column, one guy even takes an inch and a half hole saw, removes the plastic collar on the bottom half of the column, drills a hole in it and then puts it back on and says there you go that fixes your problem ... 🤔 well that may be true It eliminated the problem, but it didn't fix the issue. Thanks again for taking the time to make the video.
Aye bro I just bought a 2005 GMC ENVOY and my ignition and the gear shift was getting stuck and I spent 10 or 15 mins messing with it to get it in park or out of park you video really helped me out thanks bro
This just helped me! Symptom I had was the switch would take 10 seconds to release the key after putting in park. There was so much gunk in the switch. Good as new afterwards! Thanks
Thank u for the video very help full Exactly what my mother’s envoy is doing with her key not wanting to click back to take out so thank u again god bless
ShawnMrFixit Lee Funny thing is im a Honda guy and i hav'nt had to fix any Honda's on this yet, but i have on a bunch of Chevy's and a few European's , Soft drinks and dog hair the number one thing to make them stick lol
I'm A huge Honda guy to man ! I Have 2 and Love them both .. My auto had this problem . Worse it was at her school .. I had to take it apart in the lot ..LOl.. And since I have had 7 others in the shop .. American made are worse though , Had 10-12 of them in the past years ..
When we first bought our 04 Envoy went to Colorado same.month. the key would not come out. Had to go to dealer. Now our 05 has same problem but not under warranty. I hope this helps me
Hey Cody, mine is doing that so I took the solenoid out, cleaned it, put it back in and it's still not releasing my keys. I noticed that there is a yellow thing in the middle of the shifter and it doesn't move up when I put it in park. Is there a way to bypass that so I can remove my keys?
I really wish you'd shown how to get that part out. I have a 2006 GMC Envoy XL that has this exact same issue and I'm able to get to the gear shift and sides and get things disconnected, I'm not able to figure out a way to get the solenoid out.
Mine just did this out of nowhere. Now when I put it in drive it acts like the linkage is off. If I put it in 3 same put it in 2 or 1 drives perfect. Shifter works as it should. Got under car linkage seems to be fine. Reverse is fine as well. I can put it in park and it won’t come out until I hit brake. Everything seems to be completely normal except what I just described to you. Any suggestions cause I have no idea why it would do this. Yes battery terminals are clean btw.
I have a 2003 GMC Envoy and I'm having trouble locating the set screw that holds the shifter on any idea on how to get this off to get the console out of the way to get to this part
What if it still will not release the key? I've seen videos saying shift cable,new ignition switch, drill a hole in cover under steering wheel to push a pin.
The drilling the pin is when you're trying to remove a lock cylinder with no key but if your key is in there you can turn the key then push the pin. I have another video for stuck key in the ignition I would check first.
Anything electronic could develop a short, which may drain your battery prematurely. It may be something entirely separate from this circuit, but yes this shifter solenoid switch could possibly develop a short too.
So I took apart my switch and didn't see any gunk. With the sensor clip plugged in and everything I was able to release my key. The problem I encountered was when I installed the sensor back on to the parking mechanism, it wouldn't release my key just like it used to. I don't think the arm is disengaging when I put it back into park after installing it, any advice?
Could someone tell me the actual name of this part? I think that is what's going on with my 2002 Gmc Envoy; would be of great help if I knew the name of this part; Thanks! ...Oh and Cody; Great video I'm sure you've helped a million with this!
Hey, thanks for the video but im having an issue. I took out the piece, everything looked good inside, nothing stuck. But every time i try and put it back in, the lever is depressed all the time, so the key wont come out. Ive tried everything I can think of. It presses up against the shifter like its in gear all the time. Can you help?
I guess I should rephrase that, does that solenoid put pressure on that lever so that you have to pull on the shift to push it in? If so, then that is the bad part.
Love the video EXCEPT HOW DOES ONE REMOVE THAT PART FROM THE SHIFTER????? I went thru the comments and it seems that is a problem.....in the video it just appears on your leg like magic......HOW can i remove it?? I had to disconnect my battery so it wont go dead... would someone that got theirs out PLEASE leave a comment on how....thanks y'all
Evidently Cody doesn't read his comments since everyone's asking the same thing.....how do you actually get the solenoid out? I'm going to be doing this later hope I don't fuck anything up
I do read my comments, and there are several videos I have for stuck keys in the ignition. And the gmc can have several reasons it gets stuck. This video has helped a lot of people and my other video has also helped a lot of people. I'd need more info to help point you in the right direction to fix yours.
Hey you didn't show how to get the fucking sensor of all you did was just had it out and cleaned it so how do you get it out and we're the bolts or screws
To bad you don’t show up every thing. I have broken n the gear shift console. The cubby box remove the 2 screws inside but it will not come out. 🤦🏻not as easy as you made it out to be
I just completed removal install - "shift interlock solenoid" - GM/AC DELCO #88967140 [ fyi $87 USD Rock Auto | GM dealer quoted +$275 CDN] Problem to resolve : ignition key will not release Part condition : surface "guck" even on solenoid ( no interest in cracking it open to clean) Upon new part : no more problem - key slides out [ apparently this part replacement is the fix for locked shifter ] Take precaution : do not loose that torx screw holding the shifter to the shaft. GM will only sell the entire assembly.. even if you just lost the screw... [ guess what happened... the mystery where it fell.. finally appeared but a little sweat happened..... ] --- Reason no video on actual removal install of part is it takes "handy-work" in a cramped space to perform... and no video would be possible. Here is my council/description : [ start point being you have successfully removed the center console cover ( including unlatching that mysterious pink electrical connector) ] -- The shifter was in the park position when performing this. Remove the 4-flange nuts that affix the gear shifter assembly (GSA) to the car . in order to easily view access/position the part ( you can set it upon its cage ) and slight angle twist it ... etc - the white pin coming out of the part meets up against a surface (of shifter). - the solenoid (with the push-in) aluminum button faces out the right side [east] ( from drivers seat perspective ) of the GSA. - the part will come out the right side ( after detaching the connector that plugs into the part ) You push the part out to right... + tilt it downward abit + twist it abit forward -- this is the "handy-work" -- it will come out remember how the connector cord was relative to the solenoid before you start. [ observe the whole position of the part and where the screws are before you commence ] just goto view the part itself ( at rock auto to get the shape lay-of-the-land ] The real challenge lies in those 2 torx mounting screws. They are accessible only from top-down view within the gear-shift guide opening.. With the shifter in park.. the 1 screw-head appears ..say [NNE - 1pm] ( shifter being due north ) the other screwhead apx [ SSW -7pm ] as you peer down into shifter guide opening from high noon. - you will need about a 3-4 inch extension to reach the head of the Torx screws. - Ensure if using a Torx [T15] bit instead of a torx socket it is very secure and will not fall out when placing within the gearshift selector guides. from the left side (west-side) of the GSA you will see how the baseplate support for the part is molded as part of the GSA. The "7pm" torx screw outputs atop (overlays) a female receiver port. ( visually line them up perfectly so the screw (2mm diameter apx.) will drop right into it. I highly suggest you mask-tape the part into its resting position to prevent any slight movement once positioned ( from both sides of the GSA). I think there were a couple of nubs on the part that assist with fixing the position. and I applied a slight pressure of the part toward the shifter ( to feel it looseness or snugness ) and then "cage-taped" it from both sides to the GSA assembly. Then I came down into the shifter guide rails ( look from the left side of the GSA checking that 7pm screw lands right inside the female baseplate hole designed for it. Once that screw is in, you the other one is good to go in. Hope this helps you visualize and remedy
Thank you so much for this video!!!!! My key would not come out of the cylinder in PARK after turning the engine off. The key turns fine but would not release out. A lot of other videos and online forums talk about the switch under the steering wheel but it did not solve the issue, this video however did 100% solved my issue!!! I took apart the center console and took out the part, cleaned it, lubed it, and re installed and it worked fine for like 2 months but it then started to act up again and would not let me take the key out so I bought a new one from Amazon the part name is "ACDelco GM Genuine Parts 88967140 Shift Interlock Solenoid" and took the console apart again and installed the new part and BANG works like new.
I’ve watched 20 vids on how to rig or half ass fix this and you are the first to show how to actually fix it. Thank you youtube baby 6 lb Jesus
I don't know yet if this will fix the problem on my trailblazer, but I want Cody the car guy to know, but he's the only one that explained what the problem was. The other handful of videos I watched before getting to this one, gave ways to work around it and not fix or describe the problem as to why it will not release the key everybody talks about this release button that's right up by the key on the column inside of the steering wheel column, one guy even takes an inch and a half hole saw, removes the plastic collar on the bottom half of the column, drills a hole in it and then puts it back on and says there you go that fixes your problem ... 🤔 well that may be true It eliminated the problem, but it didn't fix the issue. Thanks again for taking the time to make the video.
Aye bro I just bought a 2005 GMC ENVOY and my ignition and the gear shift was getting stuck and I spent 10 or 15 mins messing with it to get it in park or out of park you video really helped me out thanks bro
Definitely bookmarking this page in case I still can't get the key out after charging the battery! Thanks!
This just helped me! Symptom I had was the switch would take 10 seconds to release the key after putting in park. There was so much gunk in the switch. Good as new afterwards! Thanks
Man I just had to say I’ve had this problem on and off since for ever it happend today and I found your video and guess what problem solved
Thank u for the video very help full Exactly what my mother’s envoy is doing with her key not wanting to click back to take out so thank u again god bless
Thanks man this fixed my problem in my 06 trailblazer. I can't thank you enough. I've been down on my luck...thank you!!!
Thank man used it today on my 05 envoy fixed it right up. Oh and i found $2.55 in there lol
I have found this problem in lots of makes Cody ! Great vid man , Should help out a lot of folks .. Honda's are bad for this !!
ShawnMrFixit Lee Funny thing is im a Honda guy and i hav'nt had to fix any Honda's on this yet, but i have on a bunch of Chevy's and a few European's , Soft drinks and dog hair the number one thing to make them stick lol
I'm A huge Honda guy to man ! I Have 2 and Love them both .. My auto had this problem . Worse it was at her school .. I had to take it apart in the lot ..LOl.. And since I have had 7 others in the shop .. American made are worse though , Had 10-12 of them in the past years ..
When we first bought our 04 Envoy went to Colorado same.month. the key would not come out. Had to go to dealer. Now our 05 has same problem but not under warranty. I hope this helps me
This is EXACTLY what I needed!!!!!!
Thanks. I Have an Envoy 2003 and it was rhe same issue, so hopefully ir will works.
Thanks for the tips. I had a bent shaft on the shifter.
Helpful yes. Made it look easy man. That sensor don’t come out so easy!
Hey Cody, mine is doing that so I took the solenoid out, cleaned it, put it back in and it's still not releasing my keys. I noticed that there is a yellow thing in the middle of the shifter and it doesn't move up when I put it in park. Is there a way to bypass that so I can remove my keys?
Thanks for the help! That piece you have in your hand at the 2:04mark, how did you take that out?? I'm stuck there and don't know how to remove it
I'm having same problem. I can't find any screws to get the part out or how to slide it out
I really wish you'd shown how to get that part out. I have a 2006 GMC Envoy XL that has this exact same issue and I'm able to get to the gear shift and sides and get things disconnected, I'm not able to figure out a way to get the solenoid out.
I hate when they skip steps. I had to really look in there to see what the hell he took out.
I'm stuck on the same part my self. Any help if anyone figured it out would be appreciated. 🙌
@@IkonicRaptor Your input would be greatly appreciated
Mine just did this out of nowhere. Now when I put it in drive it acts like the linkage is off. If I put it in 3 same put it in 2 or 1 drives perfect. Shifter works as it should. Got under car linkage seems to be fine. Reverse is fine as well. I can put it in park and it won’t come out until I hit brake. Everything seems to be completely normal except what I just described to you. Any suggestions cause I have no idea why it would do this. Yes battery terminals are clean btw.
after you take the 6 screws out, how did u get the part out you need to clean? the two screws or do you pop it out some how
I have the same question! Please help.. I couldn't get that part out..
Look into the shifter slit and you will see the 2 screws right on top.
how do you get that piece out it looks like it's permanent , do i have to replace the whole assembly. please help......
I have a 2003 GMC Envoy and I'm having trouble locating the set screw that holds the shifter on any idea on how to get this off to get the console out of the way to get to this part
What if it still will not release the key? I've seen videos saying shift cable,new ignition switch, drill a hole in cover under steering wheel to push a pin.
The drilling the pin is when you're trying to remove a lock cylinder with no key but if your key is in there you can turn the key then push the pin. I have another video for stuck key in the ignition I would check first.
Will this work on chevy trailblazer 05
What about if the ignition key doesn’t turn at all. My wheels aren’t locked and the battery is new and charged
Does that issue also drains your battery? I've been having battery problems lately right before I had my key stuck..
Anything electronic could develop a short, which may drain your battery prematurely. It may be something entirely separate from this circuit, but yes this shifter solenoid switch could possibly develop a short too.
So I took apart my switch and didn't see any gunk. With the sensor clip plugged in and everything I was able to release my key. The problem I encountered was when I installed the sensor back on to the parking mechanism, it wouldn't release my key just like it used to. I don't think the arm is disengaging when I put it back into park after installing it, any advice?
Thanks bro!! Functional
Could someone tell me the actual name of this part? I think that is what's going on with my 2002 Gmc Envoy; would be of great help if I knew the name of this part; Thanks! ...Oh and Cody; Great video I'm sure you've helped a million with this!
The part is the shift interlock solenoid.
thank you so much 🎉
Hey, thanks for the video but im having an issue. I took out the piece, everything looked good inside, nothing stuck. But every time i try and put it back in, the lever is depressed all the time, so the key wont come out. Ive tried everything I can think of. It presses up against the shifter like its in gear all the time. Can you help?
I guess I should rephrase that, does that solenoid put pressure on that lever so that you have to pull on the shift to push it in? If so, then that is the bad part.
Good video,thank you much very helpful
How did you remove the sensor itself
Do you have part number for this solenoid? I think mine is bad
Love the video EXCEPT HOW DOES ONE REMOVE THAT PART FROM THE SHIFTER????? I went thru the comments and it seems that is a problem.....in the video it just appears on your leg like magic......HOW can i remove it?? I had to disconnect my battery so it wont go dead... would someone that got theirs out PLEASE leave a comment on how....thanks y'all
How did you get to it without taking the whole center console out
Evidently Cody doesn't read his comments since everyone's asking the same thing.....how do you actually get the solenoid out? I'm going to be doing this later hope I don't fuck anything up
I do read my comments, and there are several videos I have for stuck keys in the ignition. And the gmc can have several reasons it gets stuck. This video has helped a lot of people and my other video has also helped a lot of people. I'd need more info to help point you in the right direction to fix yours.
does this work for gmc jimmy 2001?
Just put the car in Neutral and start the car, will work
thx for great info !!
If you pull out the switch. How is the problem
If you have no power and the key won't come out battery might be dead. I got a jump and BAM the key came out
What's the name of that piece
shift interlock solenoid
Where is the 2 screws to get the key solenoid off
No crank no start?
Thanks I fix my truck
Literally an entire part skipped like, "once you get this part" my dude, what part? Where and how do I get it out.
Thank you thank you thank you
Bless you
Tanks looks easy....
Hey you didn't show how to get the fucking sensor of all you did was just had it out and cleaned it so how do you get it out and we're the bolts or screws
To bad you don’t show up every thing. I have broken n the gear shift console. The cubby box remove the 2 screws inside but it will not come out. 🤦🏻not as easy as you made it out to be
Hey thanks for showing how to get the cyliniod out jackass
helpful vid
You didn't show how to get it out
For the best snacks goto www.SnacksForMe.com
I just completed removal install - "shift interlock solenoid" - GM/AC DELCO #88967140
[ fyi $87 USD Rock Auto | GM dealer quoted +$275 CDN]
Problem to resolve : ignition key will not release
Part condition : surface "guck" even on solenoid ( no interest in cracking it open to clean)
Upon new part : no more problem - key slides out
[ apparently this part replacement is the fix for locked shifter ]
Take precaution : do not loose that torx screw holding the shifter to the shaft.
GM will only sell the entire assembly.. even if you just lost the screw...
[ guess what happened... the mystery where it fell.. finally appeared but a little sweat happened..... ]
---
Reason no video on actual removal install of part is it takes "handy-work" in a cramped space
to perform... and no video would be possible.
Here is my council/description :
[ start point being you have successfully removed the center console cover
( including unlatching that mysterious pink electrical connector) ]
--
The shifter was in the park position when performing this.
Remove the 4-flange nuts that affix the gear shifter assembly (GSA) to the car .
in order to easily view access/position the part ( you can set it upon its cage )
and slight angle twist it ... etc
- the white pin coming out of the part meets up against a surface (of shifter).
- the solenoid (with the push-in) aluminum button faces out the right side [east] ( from drivers seat perspective ) of the GSA.
- the part will come out the right side ( after detaching the connector that plugs into the part )
You push the part out to right... + tilt it downward abit + twist it abit forward -- this is the "handy-work" -- it will come out
remember how the connector cord was relative to the solenoid before you start.
[ observe the whole position of the part and where the screws are before you commence ]
just goto view the part itself ( at rock auto to get the shape lay-of-the-land ]
The real challenge lies in those 2 torx mounting screws.
They are accessible only from top-down view within the gear-shift guide opening..
With the shifter in park.. the 1 screw-head appears ..say [NNE - 1pm] ( shifter being due north ) the other screwhead apx [ SSW -7pm ] as you peer down into shifter guide opening from high noon.
- you will need about a 3-4 inch extension to reach the head of the Torx screws.
- Ensure if using a Torx [T15] bit instead of a torx socket it is very secure and will not fall out when placing within the gearshift selector guides.
from the left side (west-side) of the GSA you will see how the baseplate support for the part is molded as part of the GSA.
The "7pm" torx screw outputs atop (overlays) a female receiver port. ( visually line them up perfectly so the screw (2mm diameter apx.) will drop right into it. I highly suggest you mask-tape the part into its resting position to prevent any slight movement once positioned ( from both sides of the GSA). I think there were a couple of nubs on the part that assist with fixing the position.
and I applied a slight pressure of the part toward the shifter ( to feel it looseness or snugness ) and then "cage-taped" it from both sides to the GSA assembly. Then I came down into the shifter guide rails ( look from the left side of the GSA checking that 7pm screw lands right inside the female baseplate hole designed for it. Once that screw is in, you the other one is good to go in.
Hope this helps you visualize and remedy