In Thick Web Switch Slerper spacing of sleeper no.4 and sleeper no.5 are same as 492 mm, in both LH & RH Side, but in TWS video Shown 550 mm LH side and 492mm RH side, it is wrongly written.
So nice detail video about thick web switch you have prepared for all of us so we all are very grateful to you for that, very few people have enough knowledge about TWS because very few stations whereat it has been laid and as well as there is no sufficient information about it in book so most of p.way staff don't have enough knowledge about it but after watching this video it will be easy to lay it because all details information about fitting, sleeper spacing and other details have been explained clearly in this video. Again, thank you so much sir,
sir the details are point to point in this video and the diagram shows everything this will help us every time , thank u so much for making this kind of video...
सर जी नमस्कार🙏, आपने बहुत ही सरल भाषा एवं सहज वीडियो सहित Thick Web Switch के बारे में अति उत्तम जानकारी दी है, जो हम सभी पी वे कर्मचारियों के लिए काफी लाभप्रद है एवं आगामी प्रमोशनल परीक्षा हेतु भी बहुत ही लाभप्रद है। आप सेवानिवृति के बाद भी इतनी मेहनत कर हम सभी को अच्छी जानकारियों से अवगत करा रहे है,आपका बहुत बहुत धन्यवाद सर!🙏🙏
thank you sir.. thank you so much. mai dabra section me technician-3rd (lohar) hu. or apki videos mere liye kaafi laabhkaari hoti h jinse mai amooly jankari prapt krta hu. 🙏🙏🙏
बहुत बहुत धन्यवाद श्री सोमनाथ जी For watching my video, Please subscribe my channal,play list is available on my channal,watch all videos they are very useful and banificial for practical and theoritical knowledge,objective questions are also available on my channal as a modal papers 1 to 10.🙏🙏
Thanks Shri Gokul Dhaked 🙏 मेरे सभी विडियो इसी लिंक पर जाकर देखे, आपको बहुत अच्छा लगेगा,और लाभ भी होगा, मेरे चैनल को सब्सक्राइब जरूर करें और अपने साथियों से भी सब्सक्राइब करवाएं।🙏 धन्यवाद 🙏
Thanks Shri Vasupillai for watching my video 🙏 Please subscribe my channel play list is available on my channel, and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge and objectives questions are also available on my channel as a model paper no-1 to 10. Thanks 🙏
Thanks Mr. Chaudhary 🙏 मेरे इसी चैनल पर बहुत से वीडियो है आप देखे तो अच्छा लगेगा। चैनल को सब्सक्राइब करें और चैनल को अपने साथियों से भी सब्सक्राइब करवाएं। 🙏धन्यवाद 🙏
मेरे वीडियो में नंबर आपकों मिल जायेगा। Thanks Shri TariqueAzizji For watching my video Please subscribe my channel, play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge objectives questions are also available on my channel as a model paper no-1 to 10.
Thanks Shri Brajendra Swaroop ji For watching my video. Please subscribe my channel play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge.🙏
Ok thanks for watching my video. Please subscribe my channel and watch my all Videos including TWS,L-Crossing,Curves,SOD,ODC, Correction Slip 1 to 18. Objective questions are also available on my channel as a model paper no-1 to 11.🙏 Regarding book Please contact me on my mobile no.9752414436.
Very good morning Sir. Aapke video really me Pway deaprtment ke liye bahut usefull hai. Aapse reuest hai aap isi tarah ke latest video laate rahe. My 1 Ques. Wedges head SRJ ke facing direction me rahenge ya opposite direction me.
Ok Shekhar Mishra Wedges का हेड SRJ की तरफ रहेगा और wedges को ठोक कर भी SRJ से हील की तरफ लगाया जायेगा 🙏 Shekhar आप मेरे पूरे वीडियो देखे, तो आपको बहुत अच्छा लगेगा, चैनल को सब्सक्राइब जरूर करें, वीडियो अच्छा लगे तो कमेंट्स अवश्य करें। इसी लिंक पर जाकर play list से आप सभी वीडियो देख सकते है । 🙏 धन्यवाद🙏
Thanks Mr.Railway Lover 🙏 For watching my video. Please subscribe my channel play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge. 🙏🙏
Thanks 🙏 आप मेरे सभी विडियो इसी लिंक पर जाकर PLAY LIST से देखें तो आपको बहुत लाभ मिलेगा चैनल को सब्सक्राइब करें और जो वीडियो अच्छा लगे तो कमेंट्स अवश्य करें लाइक जरुर करें धन्यवाद 🙏
Thanks Shri K.N. Sharma ji For watching my video and such nice comment. Please subscribe my channel play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge, objective questions are also available on my channel as a model paper no-1 to 10.🙏
विडियो देखने के लिए बहुत बहुत धन्यवाद। मेरे चैनल को सब्सक्राइब करें, और अपने साथियों से भी सब्सक्राइब करवाएं, मेरे चैनल पर प्ले लिस्ट में जाकर सभी 80 वीडियो देखें, ऑब्जेक्टिव प्रश्नों के भी 10 मॉडल पेपर है, जो आपके लिए बहुत लाभकारी होंगे।🙏
Thanks for watching my video. Please subscribe my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge objective questions are also available on my channel as a model paper no-1 to 11.🙏
Sir practical dikhaiye turnout inspection ka ..kese krte hai main line pe gauge pkdneka trika and brach line pe ke lete hai ..sare parameters.. details me sir..
Please make a video on 1 in 8.5 TWS ALSO SIR, because on drawing it is shown that SSD 's tongue mouth fixing holes comes between sleeper 8 and 9 , but on field on tongue rail , holes are given between sleeper no 7 and 8
Thanks Shri Kartik Sondhi For watching my video. Please subscribe my channel, play list is available on my channel,watch my all videos they are very useful and banificial for practical and theoritical knowledge.Objective questions are also available on channel as a modal paper no.1to 10.🪷🙏
आप मेरा TWS का वीडियो देख फिटिंग स्लीपर के अनुसार मिलेंगी । GFN Liner T-3706 ERC T- 3701 मेरे चैनल को सब्सक्राइब जरूर करें। और पूरे वीडियो देखे जो इसी चैनल पर Play list में जाकर देख सकते हो। धन्यवाद 🙏🙏
@@soumendrabehera-dt5zm Thanks for watching my video. Answer of your question. Switch length is different from length of Tongue rail length. Switch length is the distance from ATS to centre of heel block. Switch length..... (a) 1:12 PSC T/ Out = 10125 mm (b) 1:8.5 PSC T/ Out = 6400 mm Length of Tongue rail..... (a) 1:12 PSC T/ Out = 12356 mm (a) 1:8.5 PSC T/ Out = 11900 mm if you read this answer then give reply. 🙏🙏
श्री अनिल सरोज जी (1) 1:12 C/S PSC Fan shaped RH or LH turn out Can be laid without turning of Sleepers. (2) Bearing plates on Sleepers nos 3 to 20 are same.( 17X 2 =34 nos) (3) on sleeper no 21both LH or RH side Plate are same.(2 nos) (4) special bearing plates are different on sleeper nos 22 to 27 LH and RH turn out. (5) New change sleepers nos 25 to 27 RH side LH turn out one extra CI insert provided in bearing plates for curved side. Thanks 🙏🙏
Please watch my Turn out video part 1 & 2 and laying of crossing। आप इसी लिंक पर मेरे चैनल की play list me जाकर track renewal part 1,2,3,&4 देखें उसमे TRR,TSR,TFR है, इसके कर्व, लेवल क्रॉसिंग, रेल फिटिंग, ट्रैक फिटिग,ODC, SOD, और USFD,Track monitoring देखें चैनल को सब्सक्राइब करें,जो वीडियो अच्छा लगे उसे लाइक जरुर करें और कमेंट अवश्य करें। 🙏 धन्यवाद 🙏
In Thick Web Switch Slerper spacing of sleeper no.4 and sleeper no.5 are same as 492 mm, in both LH & RH Side, but in TWS video Shown 550 mm LH side and 492mm RH side, it is wrongly written.
So nice detail video about thick web switch you have prepared for all of us so we all are very grateful to you for that, very few people have enough knowledge about TWS because very few stations whereat it has been laid and as well as there is no sufficient information about it in book so most of p.way staff don't have enough knowledge about it but after watching this video it will be easy to lay it because all details information about fitting, sleeper spacing and other details have been explained clearly in this video.
Again, thank you so much sir,
Thanks my dear Sharad for Comment. 🙏
Right Sir👍
Pp
sir the details are point to point in this video and the diagram shows everything this will help us every time , thank u so much for making this kind of video...
लाजवाब वीडियो सर
बहुत-बहुत शुक्रिया सर
Thanks Bipin 🙏
सर जी नमस्कार🙏,
आपने बहुत ही सरल भाषा एवं सहज वीडियो सहित Thick Web Switch के बारे में अति उत्तम जानकारी दी है, जो हम सभी पी वे कर्मचारियों के लिए काफी लाभप्रद है एवं आगामी प्रमोशनल परीक्षा हेतु भी बहुत ही लाभप्रद है। आप सेवानिवृति के बाद भी इतनी मेहनत कर हम सभी को अच्छी जानकारियों से अवगत करा रहे है,आपका बहुत बहुत धन्यवाद सर!🙏🙏
Thanks प्रिय शिवाजी 🙏
बहुत बहुत धन्यवाद साहब जो आपने tws पर यह शानदार वीडियो बनाए है,very nice
Ok कन्हैया ये सब आप लोगो को ध्यान में रखते हुए बनाते है,की आप सब को किसी के पास नही जाकर स्वयं टर्न आउट सुरक्षित डाल सको 🙏
What a detail knowledge sir 🙏 thanks for you sir
Thanks dear Wankhede 🙏
thank you sir.. thank you so much.
mai dabra section me technician-3rd (lohar) hu.
or apki videos mere liye kaafi laabhkaari hoti h jinse mai amooly jankari prapt krta hu. 🙏🙏🙏
Thanks Ankit Sahu ji
For watching my video.🙏
Is jankari ke liye bahut bahut thank you sir ji
Sir ji hamen 1:8:5 TWS point ke bare me jankari denge to aur achchha hota sir ji
वीडियो में विस्तार रूप से बताने के लिए बहुत-बहुत शुक्रिया सर जी धन्यवाद🙏
Thanks dear Tripurari 🙏
नमस्ते sir
बहुत ही उपयोगी vedio है हम सभी के लिए । इतने विस्तार से समझाने के लिए शुक्रिया।
Thank you so much 🙏🏻
बहुत बहुत धन्यवाद श्री सोमनाथ जी
For watching my video,
Please subscribe my channal,play list is available on my channal,watch all videos they are very useful and banificial for practical and theoritical knowledge,objective questions are also available on my channal as a modal papers 1 to 10.🙏🙏
@@manojshrivastava9430 already subscribe kiya hua hai sir
Ok thanks Shri Somnath 🙏
Sir aap ne bahut aachi jankari de hai aap ka bahut dhanywad 🙏
Thanks Mr. Anil Saroj 🙏
EXCELLENT
Wow amazing.. Very very most important details sir ji... 🙏
Thanks Rupesh Kumar 🙏
बेहद उपयोगी वीडियो बनाई गई है सर... 🙏
Thanks dear Sanjay 🙏
Thank you so much providing good material for ldce je. P. way. Sir, your video is just like a brain tonic.
Thanks Binod 🙏
Very useful video sir ji z🙏🙏
Thanks dear राहुल 🙏
बहोत अच्छी तरह से समझाया सर आपने आपको तहे दिल से शुक्रिया 🙏
धन्यवाद Babarao 🙏
Very nice and very useful video thank you sir g 🙏
Namaskaar sir bahut hi sundar
Thanks Hemant 🙏
Very nice video and very hard work by you Thank you 🙏🙏🙏
Thanks भाई रैकवार जी इतने अच्छे कॉमेंट के लिए 🙏
Thanks you sir, aap ki videos bahut jyada useful hogi railway track ki knowledge ke liye
Thanks Shri Gokul Dhaked 🙏
मेरे सभी विडियो इसी लिंक पर जाकर देखे, आपको बहुत अच्छा लगेगा,और लाभ भी होगा, मेरे चैनल को सब्सक्राइब जरूर करें और अपने साथियों से भी सब्सक्राइब करवाएं।🙏 धन्यवाद 🙏
Vry informative
Thanks for watching my video and such nice comment 🙏
Ocean of knowledge for pway
Excellent sir
Thanks Shri Vasupillai
for watching my video 🙏
Please subscribe my channel play list is available on my channel, and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge and objectives questions are also available on my channel as a model paper no-1 to 10.
Thanks 🙏
Thanks sir 🙏🙏bahut dino se intezaar tha is video ka👌
Thanks Vishal ji🙏
Thanks Sir ji 🙏 ase hi achhe achhe video banate rahiye
Thanks Mr. Chaudhary 🙏
मेरे इसी चैनल पर बहुत से वीडियो है आप देखे तो अच्छा लगेगा। चैनल को सब्सक्राइब करें और चैनल को अपने साथियों से भी सब्सक्राइब करवाएं।
🙏धन्यवाद 🙏
सर जी बहुत-बहुत धन्यवाद इसी तरह से मार्गदर्शन करते रहें l
Thanks Sanjay 🙏
Aap apna number send kijiye sir
मेरे वीडियो में नंबर आपकों मिल जायेगा।
Thanks Shri TariqueAzizji
For watching my video
Please subscribe my channel, play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge objectives questions are also available on my channel as a model paper no-1 to 10.
Very nice sar JI
Thanks Veerendra 🙏
Sir behtrin prastuti
Thanks Shri Brajendra Swaroop ji
For watching my video.
Please subscribe my channel play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge.🙏
Bahut bahut dhnyawad sir ji
Thanks 🙏
VERY UUSEFUL
Thanks 🙏
बहुत अच्छा से बताइए सर जी आपने
Thanks Amrit Kumar Sharma 🙏
Very nice vido sir kanhaiya yadav je ne is chainal ke bare me bataya kota idg se trolimen me hu aapki vidio bahut achhi hai
Thanks dear Harikesh 🙏
चैनल को सब्सक्राइब जरूर करें,
Thank you sooooooooo much sir ji 🎉🎉
Thanks 🙏
Very good teaching formula sir
Thanks 🙏
Good sir ji
Ok thanks for watching my video.
Please subscribe my channel and watch my all Videos including TWS,L-Crossing,Curves,SOD,ODC, Correction Slip 1 to 18. Objective questions are also available on my channel as a model paper no-1 to 11.🙏
Regarding book Please contact me on my mobile no.9752414436.
Sur ak video full form ka bhi bnana do to aap ka bhut bhut sukriya
sir thanks for important information TWS point
Thanks Shri Anil Saroj 🙏
Please watch my all Videos 🙏
Very good morning Sir.
Aapke video really me Pway deaprtment ke liye bahut usefull hai.
Aapse reuest hai aap isi tarah ke latest video laate rahe.
My 1 Ques.
Wedges head SRJ ke facing direction me rahenge ya opposite direction me.
Ok Shekhar Mishra
Wedges का हेड SRJ की तरफ रहेगा और wedges को ठोक कर भी SRJ से हील की तरफ लगाया जायेगा 🙏
Shekhar आप मेरे पूरे वीडियो देखे, तो आपको बहुत अच्छा लगेगा, चैनल को सब्सक्राइब जरूर करें, वीडियो अच्छा लगे तो कमेंट्स अवश्य करें। इसी लिंक पर जाकर play list से आप सभी वीडियो देख सकते है ।
🙏 धन्यवाद🙏
Sir please demonstrate a lecture on USFD testing and working
Ok thanks शीघ्र दूंगा🙏
Thank you sir for your valuable information.
Amit please Subscribe my channel 🙏
Thanks sir
Thanks Mr.Railway Lover 🙏
For watching my video.
Please subscribe my channel play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge. 🙏🙏
Thank You Sir 🙏
Very useful video...🙏🙏
Thanks Sadashiv 🙏
Bhut bhut dhanyawad sir
Thanks For watching my video 🙏
Thank you sir ji
Thanks 🙏 आप मेरे सभी विडियो इसी लिंक पर जाकर PLAY LIST से देखें तो आपको बहुत लाभ मिलेगा चैनल को सब्सक्राइब करें और जो वीडियो अच्छा लगे तो कमेंट्स अवश्य करें लाइक जरुर करें धन्यवाद 🙏
Examplary initiative sir... Kudos to the efforts
Thanks Shri K.N. Sharma ji
For watching my video and such nice comment.
Please subscribe my channel play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge, objective questions are also available on my channel as a model paper no-1 to 10.🙏
Very informative video dear sir..
Thanks dear Man Mohan Mishra 🙏
Very thanks
Thanks 🙏
Please Subscribe my channel 🙏
nice sir
Thanks 🙏
Thanks Sir for this video, many students are awaiting for this type of ( Specially TWS) informative and knowledgeable information by you.
Thanks dear Rajesh 🙏
अत्यधिक महत्वपूर्ण जानकारी एक सरल भाषा में सर 🙏🙏
Thanks Shri Rakesh Shrivastava
For watching my video and such nice and valuable comments.🙏
Wah sir maje kar diye
Thanks dear Ramesh Meena ji
Please subscribe my channel.
Please watch my all 56 Videos on my channel, play list is available on my channel.🙏 Thanks 🙏
Sir please make all LDCE video for ADEN exam i'm working as SSE/P.WAY
You are tremendous leader sir
Very-very usefull Sir🙏 1 suspence h sir ji liner...gfn lagenge ya mettel
मेरे वीडियो को देखने के लिए बहुत बहुत धन्यवाद।
आप इसमे GFN लाइनर लगाएंगे, क्योंकि ये ट्रैक सर्किट का सेक्शन है
VERY HELPFUL VIDEO SIR JI
Thanks Bhim 🙏
Exellent EXELLENT work
Thanks Rajeev 🙏
Sir video बहुत behetareen है लेकिन अगर images के द्वारा बताया होता तो और बेहतर होता
विडियो देखने के लिए बहुत बहुत धन्यवाद।
मेरे चैनल को सब्सक्राइब करें, और अपने साथियों से भी सब्सक्राइब करवाएं, मेरे चैनल पर प्ले लिस्ट में जाकर सभी 80 वीडियो देखें, ऑब्जेक्टिव प्रश्नों के भी 10 मॉडल पेपर है, जो आपके लिए बहुत लाभकारी होंगे।🙏
Very nice sir. Thank you
Thanks
Sir different measuring gauges ke bare me bhi videos bnaye please
Ok thanks 🙏
Plz sir one video makes on soil
Very useful for railway employees
Thanks Shri B.K.Yadav ji
For watching my video and such nice comments.🙏
Very nice video sir ji 🙏🙏
Thanks 🙏
Very easy to understand
Thanks Vinod ji 🙏
R/sir, very nice 🙏🙏👍👍
Thanks 🙏
Sir please railways me ITKM or ETKM..ke bare me jankari de
बहुत ही सुन्दर sir ji
Thanks dear Ravindra 🙏
Thank you
Thanks for watching my video.
Please subscribe my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge objective questions are also available on my channel as a model paper no-1 to 11.🙏
Sir practical dikhaiye turnout inspection ka ..kese krte hai main line pe gauge pkdneka trika and brach line pe ke lete hai ..sare parameters.. details me sir..
Ok Live India शीघ्र बनाउंगा 🙏
Bahut achha laga sir ji
Thanks Rameshwar Arya 🙏
22 se 25 me GRPAD 4722 YA 4614 DONO ME SE EK HI LAG PATA HAI . SIR PLEASE CLEAR KARE KI SPECIAL BEARING PLTE ME DIYE GYE GR PADD KHA KHA LGATE HAI
A lot of thanks sir
Please make a video on 1 in 8.5 TWS ALSO SIR, because on drawing it is shown that SSD 's tongue mouth fixing holes comes between sleeper 8 and 9 , but on field on tongue rail , holes are given between sleeper no 7 and 8
Same problem
Ok
Ok Akash thanks 🙏
TWS 1:8.5 का वीडियो डालूंगा 🙏
Sir, Excellent very useful for our LDCE exam, but we need information in English also in subtitles, please requesting Sir, we are from AP
Ok Mr Nageshwar Rao, 🙏
Please watch my modal Paper 1 to 9. They are very useful for Examination purpose। Please subscribe my channel
Thanks 🙏
sir works manual ka bhi details video bnaeye jisse exam me help mil sake
Ok thanks Satyendra Kumar.
Please like my videos and Subscribe my channel 🙏
Sir maine dekh liya
Chandan kumar SSD के बारे में एक स्लाइड है, उसमें SSD के पार्ट्स को दिखाया है।🙏
THANKYOU SIR
Thanks Shri Kartik Sondhi
For watching my video.
Please subscribe my channel,
play list is available on my channel,watch my all videos they are very useful and banificial for practical and theoritical knowledge.Objective questions are also available on channel as a modal paper no.1to 10.🪷🙏
60KG TWS me kis trah k liner aur clip lagti hai, tie bar kis sleeper par lagate h, plz ek detail video banaiye Sir. 🙏
आप मेरा TWS का वीडियो देख फिटिंग स्लीपर के अनुसार मिलेंगी ।
GFN Liner T-3706
ERC T- 3701
मेरे चैनल को सब्सक्राइब जरूर करें। और पूरे वीडियो देखे जो इसी चैनल पर Play list में जाकर देख सकते हो। धन्यवाद 🙏🙏
Liner bahar ko side 3706 lagta hai
Nice sir ji thank you
Thanks Deep Chandra 🙏
Ati sunder sir ❤️❤️❤️
Thanks 🙏
Thank You, Sir for a wonderful guidance for us.
Sir, Can you make video on TWS of 1 in 8.5
Ok Mr. Suraj Meshram ji🙏
Good video
Sir
Thank you very much sir
Thanks Mr. G.K.Swamy 🙏
sir ssd box ke feting karne k liye video banao do please sir
Ok चैनल को सब्सक्राइब करें और अपने साथियों से भी सब्सक्राइब करवाएं
🙏🙏🙏🙏🙏🙏🙏
Thanks Anil Kumar Vemu 🙏
sir SRJ se check rail ke 1st hole ka distance kaise calculate kiya hai aapne
samjha sakte hai
आप फोन पर बात करें मेरा नंबर 9752414436
Sir special bearing plate me rubber pad lgane ko detail provide kare. Sleeper 22 se 25 me clear nahi ho rha
Ok
Nice video sir g
Thanks dear Vikram Singh 🙏
1:8.5 point me Xing check rail 1st hole ki distance from SRJ.
Ok
Bahut achha sir
Thanks 🙏
Sir length of the switch & length of tongue rail are different? Switch is tongue rail isn't that sir?
@@soumendrabehera-dt5zm
Thanks for watching my video.
Answer of your question.
Switch length is different from length of Tongue rail length.
Switch length is the distance from ATS to centre of heel block.
Switch length.....
(a) 1:12 PSC T/ Out = 10125 mm
(b) 1:8.5 PSC T/ Out = 6400 mm
Length of Tongue rail.....
(a) 1:12 PSC T/ Out = 12356 mm
(a) 1:8.5 PSC T/ Out = 11900 mm
if you read this answer then give reply. 🙏🙏
Sir ji very very important video
Sir ji aap ka personal app nhi h kya h to batao
नही आप सभी के लिए ये ही ग्रुप है
👏👏👌👌👌
Apko namskar sir 🙏
Sir ji kya left hand aur right hand turn out mai spl bearing plate alag alag hoti hai kya sleeper no -22 to 27 tak
श्री अनिल सरोज जी
(1) 1:12 C/S PSC Fan shaped RH or LH turn out Can be laid without turning of Sleepers.
(2) Bearing plates on Sleepers nos 3 to 20 are same.( 17X 2 =34 nos)
(3) on sleeper no 21both LH or RH side Plate are same.(2 nos)
(4) special bearing plates are different on sleeper nos 22 to 27
LH and RH turn out.
(5) New change sleepers nos 25 to 27 RH side LH turn out one extra CI insert provided in bearing plates for curved side.
Thanks 🙏🙏
Sir,sleeper no.4-5 me spacing gap 492mm left or right turn out ke hisab se hota hai kya?
Ok thanks Shri BK Yadav ji
for watching my video.
In TWS Spacing of sleeper no.4 to 5=492 mm is same for LH and RH turnout.🙏🙏
Please 🙏 Sir new USFD manual ka video banaye
🙏
🙏
Sir ji, ap ko bahut Namaskar, please Krupa kar ke 1 in 12 switch mein four stretcher bar fitting ke bar mein kuch bataye, please.
Please watch my Turn out video part 1 & 2 and laying of crossing।
आप इसी लिंक पर मेरे चैनल की play list me जाकर track renewal part 1,2,3,&4 देखें उसमे TRR,TSR,TFR है, इसके कर्व, लेवल क्रॉसिंग, रेल फिटिंग, ट्रैक फिटिग,ODC, SOD, और USFD,Track monitoring देखें चैनल को सब्सक्राइब करें,जो वीडियो अच्छा लगे उसे लाइक जरुर करें और कमेंट अवश्य करें। 🙏 धन्यवाद 🙏
Ssd box wing daimnson kitna hota h sir